Call 1–800–458–3687 or  Email us!

PowerMatic Oscillating Edge Sander

Click Here to Download Manual

The large 11-3/4 x 48 inch table on the OES9138 oscillating edge sander travels a full 8 inch in vertical height to accommodate most woodworking pieces. It will also tilt negative 5 degree and out to positive 45 degree. The cast iron platen is a generous 48 x 9-1/2 inch and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.

OES9138 Sander, 3HP 1PH 230V has a 5 Year warranty

  • 3HP motor with 9 x 138-3/4 inch abrasive belt handles large workpieces
  • Oscillates 24 cycles per minute for better finish and longer belt life
  • 9-1/2 x 48 inch platen with graphite pad offers largest work surface in its class
  • Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking
  • Pedestal control switch for easy access
  • Large 11-3/4 x 48 inch front worktable with 8 inch vertical travel tilts and 45 degree tilt, includes miter head for angle work
  • Precision balanced 9 inch diameter drive drum and 4 inch diameter rubber coated idler pulley for positive drive and rigid tracking
  • Large radius end table has 6 inch vertical travel and 45 degree tilt for any angle and working height needed
  • Heavy duty oscillating gearbox and shaft for long maintenance free use
  • Hinged guard opens for infinite length sanding
  • Dual dust collection ports keep work area clean and extend abrasive belt life
  • Standard Equipment:
  • Two 4 inch dust ports
  • Tilting main and end tables
  • Platen with graphite pad
  • Cast iron table bed
Detailed Specifications
Part Number 1791282
Style (Type) Horizontal/Vertical Oscillating Edge 
Sanding Belt Size (L x W) (In.) 9 x 138-3/4 
Belt Speed (FPM) 3542 
Drum Diameter (In.) 4 Outboard, 9 Drive 
Platen Size (In.) 9-1/2 x 48 
Oscillations Per Minute 24 
Main Table Size (L x W) (In.) 48 x 11-3/4 
Main Table Tilt (Deg.) 5 In, 45 Out 
Table Height from Floor (In.) 34-1/2 - 40-3/4 
End Table Size (In.) 18 
End Table Tilt (Deg.) 40 In, 45 Out 
Electrical Controls Magnetic Starter 
Dust Collection Minimum CFM Required (CFM) 1,100 
Dust Port Outside Diameter (In.)
Motor Power (HP)
Motor Phase
Motor Voltage (V.) 230 only 
Recommended Circuit Size (Amps.) 30 
Height 50.0000 
Length 83.0000 
Weight 870.0000 
Width 32.0000

 

Click Here to Download Manual

The large 11-3/4 x 48 inch table on the OES9138 oscillating edge sander travels a full 8 inch in vertical height to accommodate most woodworking pieces. It will also tilt negative 5 degree and out to positive 45 degree. The cast iron platen is a generous 48 x 9-1/2 inch and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.

OES9138 Sander, 3HP 3PH 230/460V has a 5 Year warranty

  • 3HP motor with 9 x 138-3/4 inch abrasive belt handles large workpieces
  • Oscillates 24 cycles per minute for better finish and longer belt life
  • 9-1/2 x 48 inch platen with graphite pad offers largest work surface in its class
  • Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking
  • Pedestal control switch for easy access
  • Large 11-3/4 x 48 inch front worktable with 8 inch vertical travel and 45 degree tilt, includes miter head for angle work
  • Precision balanced 9 inch diameter drive drum and 4 inch diameter rubber coated idler pulley for positive drive and rigid tracking
  • Large radius end table has 6 inch vertical travel and 45 degree tilt for any angle and working height needed
  • Heavy duty oscillating gearbox and shaft for long maintenance-free use
  • Hinged guard opens for infinite length sanding
  • Dual dust collection ports keep work area clean and extend abrasive belt life
  • Standard Equipment:
  • Two 4 inch dust ports
  • Tilting main and end tables
  • Platen with graphite pad
  • Cast iron table bed
  • 460V operation requires an additional 460V magnetic switch, part OES-002E
Detailed Specifications
Part Number 1791293
Style (Type) Horizontal/Vertical Oscillating Edge 
Sanding Belt Size (L x W) (In.) 9 x 138-3/4 
Belt Speed (FPM) 3542 
Drum Diameter (In.) 4 Outboard, 9 Drive 
Platen Size (In.) 9-1/2 x 48 
Oscillations Per Minute 24 
Main Table Size (L x W) (In.) 48 x 11-3/4 
Main Table Tilt (Deg.) 5 In, 45 Out 
Table Height from Floor (In.) 34-1/2 - 40-3/4 
End Table Size (In.) 18 
End Table Tilt (Deg.) 40 In, 45 Out 
Electrical Controls Magnetic Starter 
Dust Collection Minimum CFM Required (CFM) 1,100 
Dust Port Outside Diameter (In.)
Motor Power (HP)
Motor Phase
Motor Voltage (V.) 230/460 
Prewired Voltage (V.) 230 
Recommended Circuit Size (Amps.) 15/10 
Height 50.0000 
Length 83.0000 
Weight 870.0000 
Width 32.0000 

 

5 year warranty logo WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

 

Models
1791282 OES9138 Oscillating Edge Sander, 3HP, 1PH, 230V
1791293 OES9138 Oscillating Edge Sander, 3HP, 3Ph, 230V/460V

Call 800-458-3687 for edge sanding belts

PM9-1791282
OES9138 OSCILLATING EDGE SANDER, 3HP 1PH 230V --- WHILE SUPPLIES LAST, SHIPS LTL TRUCK FREIGHT, MADE IN TAIWAN, WGT = 870 LBS

CALL 800-458-3687 OR ADD TO CART FOR THE BEST BROTHER-IN-LAW DEAL ON THIS ITEM ** FREE FREIGHT & FREE RESIDENTIAL, LIFTAGTE & DELIVERY APPOINTMENT WHEN REQUESTED: NO HANDLING FEES
Mfg. item #: PM9-1791282
WMH1791282
lease to own for as little as:$130 per month!
Free freight for Jet-Powermatic-Wilton orders over $1,500. ALWAYS FREE Residential and Liftgate when Requested.1057
$6,599.99

96
PM9-1791293
OES9138 OSCILLATING EDGE SANDER, 3HP 3PH 230/460V --- WHILE SUPPLIES LAST, SHIPS LTL TRUCK FREIGHT, MADE IN TAIWAN, WGT = 870 LBS

CALL 800-458-3687 OR ADD TO CART FOR THE BEST BROTHER-IN-LAW DEAL ON THIS ITEM ** FREE FREIGHT & FREE RESIDENTIAL, LIFTAGTE & DELIVERY APPOINTMENT WHEN REQUESTED: NO HANDLING FEES
Mfg. item #: PM9-1791293
WMH1791293
lease to own for as little as:$130 per month!
Free freight for Jet-Powermatic-Wilton orders over $1,500. ALWAYS FREE Residential and Liftgate when Requested.1057
$6,599.99

96
Copyright © 2024 Smith-Hamilton, Inc
0.006 240424 15:17