Technical Sales 1–800–458–3687

Powermatic PM2020 Woodworking Lathe

pm2020 woodlathe

 
supernova 2 chuck s-h alt easy wood tools
The recomended Chuck for this lathe
is a Teknatool SuperNova 2
Click the image above for more infomation
Dont forget your turning tools
Check out or full line of easy wood tools
 

 

Click here to download manual

PM2020B SHORT BED LATHE, 2HP 1/3PH 230V

Stock Number: 1792020

The features you love on the 3520B lathe are now available in a smaller footprint. The PM2020 lathe is perfect for turners short on space, or projects where a short bed is convenient. Like its big brother, the PM2020 features a sliding headstock, electronic variable speed with low and high speed ranges, and the spindle lock. The enhanced features include a digital RPM readout, built in spindle indexing on the head stock, and a re-designed tailstock with internal storage, chrome trimmed handwheels, and a laser etched quill which is selfejecting. Additional features include a two position mount for the optional bed extension, a sliding hammer knockout rod with brass tip, an attached tool caddy and a metal shelf for tool storage.
 

Features:

  • Sliding headstock with electronic variable speed
  • Digital RPM readout for accurate speed adjustments
  • Tailstock has internal storage for additional accessories and attached tool caddy allows convenient access to centers and wrenches
  • Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes and other equally spaced features
  • Two position mount for optional bed extension
  • Chrome trimmed handwheels are ergonomic for a comfortable feel
  • Set of dead centers which hold a spindle for visual comparison
  • Redesigned tool rest geometry allows for better chisel movement along the tool rest
  • Laser etched quill is self-ejecting.
  • Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers

 

Specifications
Part Number 1792020
Style (Type) Leg Stand 
Swing Over Bed (In.) 20 
Swing Over Tool Rest Base (In.) 17 
Distance Between Centers (In.) 20 
Headstock Movement Full Length of Bed 
Spindle Bore 5/8 
Tailstock Bore 3/8 
Spindle Taper MT-2 
Quill Taper MT-2 
Ram Travel Quill Travel 4-1/2 
Spindle Threads (In. x TPI) 1-1/4 x 8 
Outboard External Threads (In. x TPI) 1-3/16-18 UNC 
Spindle Speeds High 125-3200/Low 50-1200 
Speed Range 50-1200, 125-3200 
Number of Indexing Positions 48 
Centerline of Spindle to Floor (In.) 44 (adjustable) 
Outboard Turning 38 
Bed Construction Cast Iron 
Motor Power (HP)
Motor Phase
Motor Voltage (V.) 230 only 
Wiring Remarks VFD will accept 1 or 3 phase power 
Motor Current (Amps) 6.2 
Recommended Circuit Size (Amps.) 20 
Height 31.0000 
Length 40.0000 
Weight 582.0000 
Width 27.0000 

 

Warranty WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

 

POWERMATIC WOOD LATHES and Accessories
1792020 PM2020 SHORT BED LATHE, 2HP 1/3PH 230V
6294727B 18 inch Bed Extension for 2020B
6294721 Lathe Tailstock Swing Away
6294732 Outboard Turning Stand, Heavy-Duty for Powermatic
6294739 Tool Support
6294751 Toolrest, Bowl Turning (Left)
6294740 Toolrest, Bowl Turning (Right)
6294901K Lamp kit
Woodworking Lathe Chucks, Tools & Duplicators
Teknatool Midi LAthe Chuck easy wood tools vega mini lathe duplicator
TeknaTool Nova Precision Lathe
Chuck,Jaws & Inserts
Easy Lathe Tools & Chucks VEGA Midi Lathe Duplicator

 

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other type of tool on the market. Designed to be kept flat on the tool rest and level to the floor, the Easy Rougher will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening. The tool design provides support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to take the pounding that you would normally suffer through when using a conventional bowl gouge for roughing. No more white knuckling a bowl gouge.

  • Cuts left, right and straight in without changing approach angle
  • Truly deeper cuts up to 1 inch off the diameter in one pass with the Full Size Rougher.
  • Requires very little physical strength or exertion
  • Your feet and hips stay in nearly the same position for the blank roughing process.
  • Very minimal handle bouncing on irregular shaped blanks
  • Reduced kick-back or sucking into work piece
  • Available Chip Deflector keeps most projectiles away from the face and neck
  • No intimidating cutting angles to learn and remember
  • No bevels to ride
  • No fear of a dangerous catch

Easy Finisher - Yet Another Innovation in Woodturning

Ci1 DetailWith another step forward in woodturning innovation, Easy Wood Tools now offers you a tool to take up where the Easy Rougher leaves off. The Easy Finisher has a round carbide cutter perfect for doing the inside work on smaller bowls and for larger coves on spindle work. Our carbide inserts are made in the USA and we are pleased to offer you a tool that is 100 percent made in America.

If you own one of our existing Easy Roughers, you well know by now that we deliver even more than we advertise, as hard as is was for you to believe before your first purchase. I assure you the productivity of this tool will exceed your highest expectations. You just can not predict the possibilities or joy this tool will provide you. In testing the prototypes for this new design, I found myself creating forms that were never even on my list to try because the dangers and complications of existing tools were just not worth the trouble.  Craig Jackson, Founder

Like the other Easy tools, the Easy Finishers are designed to be used with the tool rest set so that when the tool is held level the top of the cutter is on center. Then just keep it level to the floor and flat on the tool rest for all types of cuts... it does not get any easier than that. There are no complicated approach angles, or bevels to ride. The design of this tool allows the Easy Finisher to effortlessly cut from the center of a bowl out to the rim OR from the rim to the center! All without changing any angles whatsoever. You just stand in one spot and cut coming and going until you get to the shape you want.

The Easy Finisher utilizes the same carbide cutter technology as the Easy Rougher that reduces strain and fatigue, improves productivity, and virtually eliminates sharpening. It comes loaded with one round cutter and when it gets dull, you just rotate the cutter for a fresh cut. Please note: The round cutters are not interchangeable with the carbide cutters on the Easy Rougher tool bars.

When the cutter eventually gets dull, just loosen the retaining screw and rotate cutter about 1/4 of a turn, then re-tighten the screw.

We promise this tool will open up a whole new level of design possibilities for your craft and it will exceed your expectations. If not, return for a complete refund.

Replacement carbide cutter number is engraved right on the tool bar.

Available in four sizes - Mini, Mid-Size, Full-Size and Pro. See purchase page for all products, sizes and accessories.

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Detailer tools really pick up where other tools leave off and provide another level of woodturning creativity as the unique diamond cutter shape fits in tight places where the cutters on the other tools will just not fit.

These tools were designed for the primary purpose of doing the small intricate work and cutting final details on your projects such as small coves and beads on both spindle and bowl work. They are also very handy for cutting chuck tenons and making inside reverse angle cuts for inside chucking bowls with dovetail jaws. You may find they work well for hogging your green wood projects too.

The Easy Detailers are engineered to cut going straight in employing just the nose of the tool.

The Easy Detailer tools are engineered with a reduced relief angle to the long cuttings edges making the long edges less aggressive when held in contact with the wood as the nose of the tool is cutting. In use, the long edge is intended to perform as a "control surface" and serve to be in contact with the wood just behind the cut; much like a bevel is being rubbed.

For safety reasons, avoid plunging the tool so deep into the work at once to the depth you would have both sides of the cutter in contact with the wood too greatly at the same time. This could cause too much force at once and lead to binding of the tool in the groove.

Each diamond-shaped Easy Detailer cutter is engineered to fit all size Detailer tools in our current product line. When the cutter eventually dulls, just loosen the retaining screw and rotate cutter, then re-tighten the screw.

Replacement carbide cutter number is engraved right on the tool bar.
Available in four sizes - see purchase page for all products, sizes and accessories.

PART NUMBER DESCRIPTION
2200 MID-SIZE EASY ROUGHER
3200 PRO EASY ROUGHER
6300 MID-SIZE EASY FINISHER
3400 PRO EASY FINISHER
7300 MID-SIZE EASY DETAILER
3700 PRO EASY DETAILER

 

 

1792020
PM2020 SHORT BED LATHE, 2HP 1/3PH 220V ** SHIPS LTL TRUCK FREIGHT, WGT = 582 LBS
Mfg. item #: 1792020
WMH1792020
lease to own for as little as:$74 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$3,699.99

44
6294727B
NEW - PM2020 BED EXT., WGT = 67 LBS
Mfg. item #: 6294727B
WMH6294727B
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.8
$451.55

44
6294721
** TAILSTOCK SWING AWAY FOR 3520, 3520A, 3520B, 3520C, PM2020 ** SHIPS FROM OUR STORE IN MIAMI, FL
Mfg. item #: 6294721
WMH6294721
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.8
$299.99

44
6294732
HEAVY-DUTY OUTBOARD TURNING STAND FOR MODELS 3520C AND 4224B ** SHIPS LTL TRUCK FREIGHT, WGT = 137 LBS
Mfg. item #: 6294732
WMH6294732
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1020
$529.99

44
6294739
** 6 TOOLREST FOR 3520A, 3520B, 4224 ** SHIPS FROM OUR STORE IN MIAMI, FL
Mfg. item #: 6294739
WMH6294739
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$91.18

44
6294751
** BOWL TURNING TOOLREST (LEFT) FOR 3520A, 3520B, 4224 ** SHIPS FROM OUR STORE IN MIAMI, FL
Mfg. item #: 6294751
WMH6294751
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$129.99

44
6294740
** BOWL TURNING TOOLREST (RIGHT) FOR 3520A, 3520B, 4224 ** SHIPS FROM OUR STORE IN MIAMI, FL
Mfg. item #: 6294740
WMH6294740
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$129.99

44
6294901K
** LAMP KIT 4224B, 3520C ** SHIPS FROM OUR STORE IN MIAMI, FL
Mfg. item #: 6294901K
WMH6294901K
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.8
$479.99

44
2200
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY ROUGHER ** USE CI2-SQ - GENUINE EWT REPLACEMENT CARBIDE - REPLACEMENT CUTTER OPTION: CI2-R2
Mfg. item #: 2200
EASY2200
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

1240
3200
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY ROUGHER ** USE CI1-R4 - GENUINE EWT REPLACEMENT CARBIDE - REPLACEMENT CUTTER OPTIONS: CI1-SQ OR CI1-R2
Mfg. item #: 3200
EASY3200
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.98

1240
6300
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY FINISHER ** USE CI3 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 6300
EASY6300
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

1240
3400
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY FINISHER ** USE CI0 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 3400
EASY3400
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.98

1240
7300
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY DETAILER ** USE CI4 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 7300
EASY7300
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

1240
3700
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY DETAILER ** USE CI4 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 3700
EASY3700
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.98

1240
Copyright © 2021 Smith-Hamilton, Inc
0.013 210427 12:21