chat now with southern tool
Technical Sales 1–800–458–3687

Powermatic 3520B - 20" Lathe w/DRO

20 % OFF Purchase of Powermatic 3520B Lathe - Offer valid Aug 1-31, 2017

s-h alt

supernova 2 chuck s-h alt easy wood tools
The recomended Chuck for this lathe
is a Teknatool SuperNova 2
Click the image above for more infomation
Dont forget your turning tools
Check out or full line of easy wood tools
 

 

1352001 - 3520B Lathe, 2HP, 1 or 3PH, 220V

 

The Powermatic 3520B is the third evolution of the time honored lathe with many new and improved features. The 3520B retained all the features of the prior models such as the sliding headstock, electronic variable speed with low and high speed ranges, and the spindle lock. The enhanced features include a digital RPM readout, built in spindle indexing on the head stock, and a re-designed tailstock with internal storage, chrome trimmed handwheels, and a laser etched quill which is self ejecting. The toolrest assembly also has improved locking on a new profile tool rest which can accommodate an optional dust hood assembly that travels with the toolrest. Additional features include a set of dead centers which hold a spindle for visual comparison, a two position mount for the optional bed extension, a sliding hammer knockout rod with brass tip, an attached tool caddy and a metal shelf for tool storage.

Features

  • Sliding headstock with electronic variable speed and digital RPM readout

  • Two-position mount for the optional bed extension

  • Spindle lock and built in spindle indexing on the head stock

  • Tool rest assembly with improved locking on a new profile tool rest

  • Set of dead centers which hold a spindle for visual comparison

  • Optional dust assembly that travels with the tool rest

  • Laser etched quill which is self ejecting

  • Sliding hammer knockout rod with brass tip

  • Attached tool caddy for tool storage

  • Tailstock with internal storage

  • Chrome trimmed handwheels

Standard Equipment

  • 2HP TEFC Motor

  • Safety shield

  • 3" face plate and face plate wrench

  • 14" tool rest

  • Multiple ball-bearing live center

  • Brass tipped knockout rod

  • Drive center

  • Spindle lock

Part Number 1352001  
Swing Over Bed 20 "
Swing Over Tool Rest Base 16 "
Distance Between Centers 34½ "
Headstock Taper MT-2  
Spindle Nose 1 1/4 " x 8 TPI  
Hole Through Spindle 9/16 "
Tailstock Taper MT-2  
Ram Travel 4½ "
Centerline of Spindle to Floor 44 "
Spindle Taper MT-2  
Headstock Movement full length of bed  
Indexing Positions 48  
Bed Construction cast iron  
Spindle Speeds high 125-3200, low 50-1200  
Motor Power 2 HP
Motor Voltage 220 V  
Motor Current 6.2 A  
Motor Phase 1 Ph
Web Description 3520B Lathe, 2HP, 1 or 3PH, 220V  
Model Number 3520B  
Brand Powermatic  
Overall Dimensions 75 x 27 x 58  
Height 31 inch
Width 27 inch
Length 55 inch
Net Weight 630 pound
s-h alt WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

 

POWERMATIC WOOD LATHES and Accessories
1352001 3520B Lathe, 2HP, Will Operate 1Ph or 3Ph, 230V
6294901K NEW! - Lamp Kit for 3520B
6294727B Bed Extension, 18" with Tool Rest Extension for 3520A, 3520B
6294726B Bed Extension, 50" with Leg, for 3520B
6294721 Lathe Tailstock Swing Away
6294732 NEW! - Heavy Duty OutBoard Turning Stand
6294733 On/Off Remote Switch for 3520A, 3520B, 4224
6294739 Toolrest, 6" for 3520A, 3520B, 4224
6294751 Toolrest, Bowl Turning (Left) for 3520A, 3520B, 4224
6294740 Toolrest, Bowl Turning (Right) for 3520A, 3520B, 4224
6294732 Outboard Turning Stand, Heavy-Duty for 3520,3520A,3520B,4224
Woodworking Lathe Chucks, Tools & Duplicators
Teknatool Midi LAthe Chuck easy wood tools vega mini lathe duplicator
TeknaTool Nova Precision Lathe
Chuck,Jaws & Inserts
Easy Lathe Tools & Chucks VEGA PRO Lathe Duplicator

 

#1 BEST SELLING CHUCK
SUPER NOVA 2 CHUCK

This powerful and solid chuck is perfect for use on lathes with up to 20 inch/508mm swing. Brilliant all around geared chuck for a majority of users.

Packed with exciting innovative features and at a fantastically competitive price, the SuperNova 2 is the leading chuck of choice on the market today and reinforces NOVA as the leading brand in the chuck market.

Note: If your lathe is less than 20 inch diameter swing, please have a look at either the Nova Precision Midi or the Nova G3 chucks.  If your lathe has more than 20 inch diameter swing, please have a look at the NOVA Titan Chuck.

supernova 2 chuck

Features standard on all NOVA chucks:

  • Quality Materials.
  • Precision Machining.
  • Common Accessory Jaw Fixing Profile compatible across all NOVA chucks and accessories.
  • High Tech Precision Composite Jaw Slides.
  • Special Woodturning Dovetail Profile on Jaws.
  • Auto Safety Stop Feature. Jaw slides cant protrude past the chuck body.
  • Comprehensive Instructions.
  • Common Insert/Adaptor Fitting compatible across all NOVA chucks.
  • Safe Lock Woodworm Screw. 
  • 2 Years Warranty

Additional SuperNova 2 Features and Benefits

  • supernova 2 backFully sealed composite indexing backing plate.  Made from ultra tough Duracon composite, reinforced with stranded glass fibres for extremely long life in tough conditions. Self lubricating properties. Unique indexing function built into backing plate. Holographic sticker for NOVA authenticity.
  • Powerful Geared Grip with Tuff Lock Technology. Precise, hardened geared action delivers incredible smooth strength. Solid, vibration free.
  • Single Handed Operation. Fast and convenient when mounting your project. More time spent turning and less time spent preparing.  
  • Captured pinion and Ball nose Allen key with large, easy grip handle.  Fast, positive location, easy and comfortable to use. Rotation arrow for easy reference and fast opening and closing action. Unique, tilt away action, means it can be angled back in operation, away from work.
  • Body made from precision machined 1045 High Tensile Steel, with a polished self metal finish to allow for closer tolerances.
  • Able to take all NOVA accessories jaws. (except Titan Power grip, special designed for Titan Chuck.) 

Product Technical Specification

  • Recommended for power workholding on lathes from 350mm (14 inch) to 508mm (20 inch) diameter swing.
  • Up to 736mm/29 inch diameter bowls (using PowerGrip accessory jaws)
  • Up to 482mm/19 inch length spigots (using PowerGrip accessory jaws)  
  • Up to 310mm/12 inch bowl (using standard 50mm accessories jaw)
  • Up to 150mm/6 inch lengh x 10mm/4 inch diameter (using standard 50mm accessories jaw)
  • Full Packaged Weight (Std) 2.5kgs/5.512lbs
  • 24 Division Index built into the backing plate design.

Compatibilityjaws

Capable to take entire NOVA Jaws range. (except Titan Power Grip which specially designed for Titan Chuck)

Only NOVA Chucks give you the same jaw fixing system and same insert/adaptor system across all chuck models.

This means all accessory jaws in the range fit all the chucks in the range, including older chuck models, giving you the ultimate flexibility. In buying a NOVA chuck, you can be confident that whether you want to move up or down the range, any accessories you have invested in will Fit.

Standard Equipment

  • Chuck Body and Jaw Slides (Comes fully assembled)
  • 50mm/2 inch Jaws
  • Safe Lock Woodworm Screw
  • Manual and Fastenings
  • Display/Storage Box
  • T Bar Allen Head Handle with Soft Plastic Grip
  • Insert/Adaptor (some resellers may sell this separately, check with them)

Threads Covered:

  • Std Insert/Adaptor Type Chuck (Code 23055) Requires an insert to fit to lathe. Some resellers may sell this separately, check with them.

  • M33x3.5 Dedicated Threaded Chuck (Code 23062)

 

 

 

Teknatool Wood Turning Lathe Chucks, Jaws and Inserts
Teknatool Wood Turning Lathe Chucks
23055 Supernova2 Chuck Insert Version
IDNS Insert Nova 1"  8 TPI RH (For JWL-1442VSK)
ILNS Insert Nova 1 1/4"  8 TPI UNS (for JWL-1642EVS and JWL-1642EVS-2)
INNS Insert Nova Blank (Allows you to customize a insert for any lathe)

*** Chucks Require Seperate Insert for Final Insulation & Additional Jaws Sizes are Available ***

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other type of tool on the market. Designed to be kept flat on the tool rest and level to the floor, the Easy Rougher will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening. The tool design provides support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to take the pounding that you would normally suffer through when using a conventional bowl gouge for roughing. No more white knuckling a bowl gouge.

  • Cuts left, right and straight in without changing approach angle
  • Truly deeper cuts up to 1 inch off the diameter in one pass with the Full Size Rougher.
  • Requires very little physical strength or exertion
  • Your feet and hips stay in nearly the same position for the blank roughing process.
  • Very minimal handle bouncing on irregular shaped blanks
  • Reduced kick-back or sucking into work piece
  • Available Chip Deflector keeps most projectiles away from the face and neck
  • No intimidating cutting angles to learn and remember
  • No bevels to ride
  • No fear of a dangerous catch

Easy Finisher - Yet Another Innovation in Woodturning

Ci1 DetailWith another step forward in woodturning innovation, Easy Wood Tools now offers you a tool to take up where the Easy Rougher leaves off. The Easy Finisher has a round carbide cutter perfect for doing the inside work on smaller bowls and for larger coves on spindle work. Our carbide inserts are made in the USA and we are pleased to offer you a tool that is 100 percent made in America.

If you own one of our existing Easy Roughers, you well know by now that we deliver even more than we advertise, as hard as is was for you to believe before your first purchase. I assure you the productivity of this tool will exceed your highest expectations. You just can not predict the possibilities or joy this tool will provide you. In testing the prototypes for this new design, I found myself creating forms that were never even on my list to try because the dangers and complications of existing tools were just not worth the trouble.  Craig Jackson, Founder

Like the other Easy tools, the Easy Finishers are designed to be used with the tool rest set so that when the tool is held level the top of the cutter is on center. Then just keep it level to the floor and flat on the tool rest for all types of cuts... it does not get any easier than that. There are no complicated approach angles, or bevels to ride. The design of this tool allows the Easy Finisher to effortlessly cut from the center of a bowl out to the rim OR from the rim to the center! All without changing any angles whatsoever. You just stand in one spot and cut coming and going until you get to the shape you want.

The Easy Finisher utilizes the same carbide cutter technology as the Easy Rougher that reduces strain and fatigue, improves productivity, and virtually eliminates sharpening. It comes loaded with one round cutter and when it gets dull, you just rotate the cutter for a fresh cut. Please note: The round cutters are not interchangeable with the carbide cutters on the Easy Rougher tool bars.

When the cutter eventually gets dull, just loosen the retaining screw and rotate cutter about 1/4 of a turn, then re-tighten the screw.

We promise this tool will open up a whole new level of design possibilities for your craft and it will exceed your expectations. If not, return for a complete refund.

Replacement carbide cutter number is engraved right on the tool bar.

Available in four sizes - Mini, Mid-Size, Full-Size and Pro. See purchase page for all products, sizes and accessories.

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Detailer tools really pick up where other tools leave off and provide another level of woodturning creativity as the unique diamond cutter shape fits in tight places where the cutters on the other tools will just not fit.

These tools were designed for the primary purpose of doing the small intricate work and cutting final details on your projects such as small coves and beads on both spindle and bowl work. They are also very handy for cutting chuck tenons and making inside reverse angle cuts for inside chucking bowls with dovetail jaws. You may find they work well for hogging your green wood projects too.

The Easy Detailers are engineered to cut going straight in employing just the nose of the tool.

The Easy Detailer tools are engineered with a reduced relief angle to the long cuttings edges making the long edges less aggressive when held in contact with the wood as the nose of the tool is cutting. In use, the long edge is intended to perform as a "control surface" and serve to be in contact with the wood just behind the cut; much like a bevel is being rubbed.

For safety reasons, avoid plunging the tool so deep into the work at once to the depth you would have both sides of the cutter in contact with the wood too greatly at the same time. This could cause too much force at once and lead to binding of the tool in the groove.

Each diamond-shaped Easy Detailer cutter is engineered to fit all size Detailer tools in our current product line. When the cutter eventually dulls, just loosen the retaining screw and rotate cutter, then re-tighten the screw.

Replacement carbide cutter number is engraved right on the tool bar.
Available in four sizes - see purchase page for all products, sizes and accessories.

PART NUMBER DESCRIPTION
2200 MID-SIZE EASY ROUGHER
3200 PRO EASY ROUGHER
6300 MID-SIZE EASY FINISHER
3400 PRO EASY FINISHER
7300 MID-SIZE EASY DETAILER
3700 PRO EASY DETAILER

 

1352001-sm.gif
More Informationshow more
1352001
3520B LATHE, 2 HP, 1 OR 3 PH, 230V
LIMITED TIME PRICE REDUCTION = SAVE 20% $640.00 - NOW THROUGH AUGUST 31ST, 2017
** BUY THE SUPERNOVA CHUCK(23055) & INSERT(ILNS) FOR ONLY $129.99 WITH THIS PROMO = $54.00 ADDITIONAL SAVINGS
Mfg. item #: 1352001
WMH1352001
lease to own for as little as:$82 per month!
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$4,081.99

1
More Informationshow more
6294901K
LAMP KIT 4224B, 3520B
Mfg. item #: 6294901K
WMH6294901K
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$477.03

1
More Informationshow more
6294727B
18 BED EXTENSION WITH TOOL REST EXTENSION FOR 3520A, 3520B
Mfg. item #: 6294727B
WMH6294727B
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$476.02

1
More Informationshow more
6294726B
50 BED EXTENSION WITH LEG FOR 3520B
Mfg. item #: 6294726B
WMH6294726B
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$1,214.26

1
More Informationshow more
6294721
TAILSTOCK SWING AWAY FOR 3520, 3520A, 3520B, PM2020
Mfg. item #: 6294721
WMH6294721
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$324.13

1
More Informationshow more
6294732
HEAVY-DUTY OUTBOARD TURNING STAND FOR MODELS 3520B AND 4224B
Mfg. item #: 6294732
WMH6294732
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$528.94

1
More Informationshow more
6294733
ON/OFF REMOTE SWITCH FOR 3520A, 3520B, 4224
Mfg. item #: 6294733
WMH6294733
$11.95 Shipping on all JET, Powermatic, Wilton and Performax orders less that $199.95. Combine products to meet the minimum order requirement for Free Shipping.1019
$102.51

1
More Informationshow more
6294739
6 TOOLREST FOR 3520A, 3520B, 4224
Mfg. item #: 6294739
WMH6294739
$11.95 Shipping on all JET, Powermatic, Wilton and Performax orders less that $199.95. Combine products to meet the minimum order requirement for Free Shipping.1019
$80.89

1
More Informationshow more
6294751
BOWL TURNING TOOLREST (LEFT) FOR 3520A, 3520B, 4224
Mfg. item #: 6294751
WMH6294751
$11.95 Shipping on all JET, Powermatic, Wilton and Performax orders less that $199.95. Combine products to meet the minimum order requirement for Free Shipping.1019
$120.84

1
More Informationshow more
6294740
BOWL TURNING TOOLREST (RIGHT) FOR 3520A, 3520B, 4224
Mfg. item #: 6294740
WMH6294740
$11.95 Shipping on all JET, Powermatic, Wilton and Performax orders less that $199.95. Combine products to meet the minimum order requirement for Free Shipping.1019
$123.84

1
23055
SUPERNOVA2 CHUCK INSERT VERSION ** PROMO THRU 3-31-18
Mfg. item #: 23055
TEK23055
FREE shipping when ordered with a machine from this manufacturer.20
$159.99

47
IDNS
INSERT NOVA 1 8 TPI RH ** PROMO THRU 3-31-18
Mfg. item #: IDNS
TEKIDNS
FREE shipping when ordered with a machine from this manufacturer.20
$21.99

47   2
ILNS
INSERT NOVA 1 1/4 8 TPI UNS ** PROMO THRU 3-31-18
Mfg. item #: ILNS
TEKILNS
FREE shipping when ordered with a machine from this manufacturer.20
$21.99

47
INNS
INSERT NOVA BLANK ** PROMO THRU 3-31-18
Mfg. item #: INNS
TEKINNS
FREE shipping when ordered with a machine from this manufacturer.20
$21.99

47
2200
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY ROUGHER ** USE CI2-SQ - GENUINE EWT REPLACEMENT CARBIDE - REPLACEMENT CUTTER OPTION: CI2-R2
Mfg. item #: 2200
EASY2200
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

175
3200
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY ROUGHER ** USE CI1-R4 - GENUINE EWT REPLACEMENT CARBIDE - REPLACEMENT CUTTER OPTIONS: CI1-SQ OR CI1-R2
Mfg. item #: 3200
EASY3200
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.98

175
6300
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY FINISHER ** USE CI3 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 6300
EASY6300
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

175
3400
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY FINISHER ** USE CI0 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 3400
EASY3400
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.98

175
7300
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY DETAILER ** USE CI4 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 7300
EASY7300
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

175
3700
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY DETAILER ** USE CI4 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 3700
EASY3700
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.98

175
Copyright © 2017 Smith-Hamilton, Inc
0.017 170731 15:31