Technical Sales 1–800–458–3687

Powermatic 29 Shaper, 5HP 3PH 230/460V

 

The Model 29 Shaper is a sturdy machine with a 35-1/2" x 27-5/8" extra thick cast iron table. The spindle tilts 45° forward and 5° backward for bevel shaping. Three standard table inserts are included, the smaller insert with a guide shoulder for copy work. Two hold-downs and cutterhead shield come standard, and the entire hold-down assembly flips out of the way for spindle changes.

  • Extra thick cast iron table with T-slot for heavy duty support
  • Spindle tilts 45° forward and 5° back for bevel shaping
  • Three standard table inserts, smaller insert has guide shoulder for copy work
  • Miter gauge has clamp assembly and work stop for shaping the ends of stock
  • Entire hold down assembly with cutterhead shield flips out of the way for spindle changes
  • Sturdy fence assembly has adjustment dials for fine-tuning
  • Work-piece hold-downs and cutterhead shield

Standard Equipment

  • 3 table inserts - 2-1/2" and 5-1/2" standard and 5-7/8" x 4-3/16" oval
  • 3 Spindles - 3/4", 1" and 1-1/4"
  • 2 Collet router bit adaptors - 3/8" and 1/2"
  • Miter gauge with clamp
  • Draw bar
  • Dust collection port
Part Number 1791244  
Spindle Speed 3000, 4000, 6000, 8000 and 10,000 RPM Reversing  
Reversable Yes  
Spindle Diameter 3/4, 1 and 1 1/4 "  
Spindle Size Under Nut 3/4 (3 15/32), 1 (3 15/16) and 1 1/4 (4 3/4) "  
Spindle Travel 7 1/16  
Tilting Spindle 45° forward, 5° back  
Table Size 35 1/2 x 27 5/8 "  
Table Height From Floor 35.5 "
Table Opening Diameter 8 15/16 "
Table Insert Opening Diameter 2 1/2, 5 1/2 and 5 7/8 x 4 3/16 " (oval)  
Fence Size (L x H) 5 1/8 x 27 9/16 "  
Slide Table Size (L x W) n.a.  
Table Travel n.a.  
Table Inserts 3  
Router Bit Collet Diameter 3/8 and 1/2 "  
Dust Port Outside Diameter 4 "  
Dust Collection Minimum CFM Required 600 cu.ft/min
Electrical Controls - Magnetic Starter Yes  
Digital Readouts n.a.  
Motor Power 5 HP
Motor Voltage 230 / 460 V  
Prewired Voltage 230 V
Wiring Remarks Requires optional transformer for 460 V  
Motor Phase 3 Ph
Web Description 29 Shaper, 5HP 3PH 230/460V  
Model Number 29  
Brand Powermatic  
Overall Dimensions 35-1/2 x 33-1/2 x 46  
Height 46 inch
Width 33.5 inch
Length 35.5 inch
Net Weight 682 pound
s-h alt WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

 

POWERMATIC® SHAPERS and Accessories
1791244 29 Shaper, 5HP 3PH 230/460V
6293198 Spindle, 1" for 29 Shaper
6293199 Spindle, 1-1/4" for 29 Shaper

s-h alt

1791244
29 SHAPER, 5HP 3PH 230/460V
Mfg. item #: 1791244
WMH1791244
lease to own for as little as:$104 per month!
Southern Tool Limited Time Special - FREE FREIGHT On this Item.75
$5,222.40

4487
6293198
^^ 1 SPINDLE FOR 29 SHAPER - TAWAI
Mfg. item #: 6293198
WMH6293198
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

525
6293199
^^ 1-1/4 SPINDLE FOR 29 SHAPER - T
Mfg. item #: 6293199
WMH6293199
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

525
Copyright © 2023 Smith-Hamilton, Inc
0.004 150419 18:39