Rice Fire Hose Test Pumps

The RICE FH-Series of fire hose testers meet or exceed test standards set forth by the NFPA (1962.5) and the RMA. The FH-Series is capable of testing fire hose up to 6" in diameter. A large 2 & ½" inlet allows the user to quickly fill and bleed the lines through a 1 & ½" manifold. NO WILD LINES - Unique to the FH-Series of fire hose testers, is a ballvalve strategically placed on the inlet piping that allows the user to fill the lines with "LARGE VOLUME at LOW PRESSURE" and test with "LOW VOLUME at HIGH PRESSURE", eliminating the elements that may cause wild lines. All units in the fire hose tester series have a stainless steel liquid filled gauge that ensures accurate readings, with less flutter. The FH-Series of fire hose testers are a safer, less costly and more efficient way to test your fire hose, keeping your pumper how it should be… ready for action! The FH-Series is available with electric or gas power sources. As with all RICE Hydro products, the FH Series hydrostatic test pumps can be "built to suit", please contact the factory for details.

The FH Series, All FIRED UP…

• Pressures up to 1,000 PSI
• Special Order Options Available
• Independent outlet ballvalves - No Wild Lines
• Offering 8 Different Quality Models to Choose From
• Automatic Pressure By-pass & Exclusive Rice Air Bleed System

FH-3, Fire Hose Tester, 3 GPM up to 500 PSI

Hydrostatic Test Pump, 4 Outlet Fire Hose Tester. Triplex Plunger, 1 HP 50/60 HZ Electric Motor. The FH-3 3 GPM up to 500 PSI

Product Details
Hydrostatic Fire Hose Tester, designed to safely test fire hose up to 6 inch in diameter.  Four independently controlled outlets, and a large 2 & 1/2" swivel inlet, to quickly fill and bleed lines for testing.  The FH-3 fire hose tester, meets testing standards as set forth in the NFPA (1962.7) and the RMA.

FH-10H, Fire Hose Tester, 10 GPM up to 450 PSI

Hydrostatic Test Pump, 4 Outlet Fire Hose Tester. Piston Pump, 163 CC 5.5HP Honda Engine. The FH-10H 10 GPM up to 450 PSI

Product Details
Hydrostatic Fire Hose Tester, designed to safely test fire hose up to 6 inch in diameter.  Four independently controlled outlets, and a large 2 & 1/2" swivel inlet, to quickly fill and bleed lines for testing.  The FH-10H fire hose tester, meets testing standards as set forth in the NFPA (1962.7) and the RMA.

FH-10B, Fire Hose Tester, 10 GPM up to 450 PSI

Hydrostatic Test Pump, 4 Outlet Fire Hose Tester. Piston Pump, 206 CC 5.5 HP Briggs & Stratton Engine. The FH-10H 10 GPM up to 450 PSI

Product Details
Hydrostatic Fire Hose Tester, designed to safely test fire hose up to 6 inch in diameter.  Four independently controlled outlets, and a large 2 & 1/2" swivel inlet, to quickly fill and bleed lines for testing.  The FH-10B fire hose tester, meets testing standards as set forth in the NFPA (1962.7) and the RMA.

FH-5H, Fire Hose Tester, 5 GPM up to 1000 PSI

Hydrostatic Test Pump, 4 outlet port Fire Hose Tester. Triplex Plunger, 163 CC 5.5 HP Honda Engine The FH-5H 5 GPM up to 1000 PSI

Product Details
Hydrostatic Fire Hose Tester, designed to safely test fire hose up to 6 inch in diameter.  Four independently controlled outlets, and a large 2 & 1/2" swivel inlet, to quickly fill and bleed lines for testing.  The FH-5H fire hose tester, meets testing standards as set forth in the NFPA (1962.7) and the RMA.

FH-5B, Fire Hose Tester, 5 GPM up to 1000 PSI

Hydrostatic Test Pump, 4 Outlet Fire Hose Tester. Triplex Plunger, 206 CC 5.5 HP Briggs & Stratton Engine The FH-5B 5 GPM up to 1000 PSI

Product Details
Hydrostatic Fire Hose Tester, designed to safely test fire hose up to 6 inch in diameter.  Four independently controlled outlets, and a large 2 & 1/2" swivel inlet, to quickly fill and bleed lines for testing.  The FH-5B fire hose tester, meets testing standards as set forth in the NFPA (1962.7) and the RMA.