Technical Sales 1–800–458–3687

SuperMax SuperBrush 13 - 13"Brush Sander

s-h alts-h alt


Shown with optional accessories                                     
SuperBrush Machine Prices Inclued One FREE Brush Of Your Choice!

brush options Flatter Strips
Brush Options Flatter Strips

 

Brochure

User Manual

The 13 inch Combo Brush/Drum is the answer to your production bottleneck. Developed with mouldings in mind, this versatile sander can tackle every step in your finishing process, from sanding raw wood to sanding in between coats of stain or primer. Read about other applications below.

This model features a 1-3/4 HP motor, and can handle stock up to 4 inch thick, or as thin as 1/32 inch. It can also be equipped with an optional sanding drum for surface sanding.

Features:

  • Infinitely variable brush speed and conveyor feed rate
  • Optional Drum for surface sanding
  • Quickly change brush heads or abrasive loadings
  • Fully adjustable tension rollers prevent stock slippage
  • Reinforced steel conveyor bed with a poly conveyor belt
  • Precision height adjustment
  • Bristle Contact Gauge included

Applications:

  • Raw Wood Sanding, White Wood Sanding Break sharp edges, Open grain for even finish absorption, Blend out minor defects
  • Sealer Sanding, Primer Sanding, Scuff Sanding
  • Removes raised fibers and grain (denib/defuzz)
  • Degloss previously finished wood
  • Clean reclaimed wood
  • Wire Brushing, Distress (weathered/Southwest finish), Pull out soft grain to create textured surface

 

Specifications
Sanding Capacity:   Maximum Width (in): 13
Minimum Length (in): 9
Maximum Thickness (in): 4, varies with drum/brush style
Minimum Thickness (in): 1/32
Dimensions (in):    35L x 42W x 44H
Drum (in):    5 x 13 extruded aluminum
Brush (in):    6-8 typical diameter
Speed:    ranged variable RPM, 400-1200
Dust Hood:    1- 4 inch port, hinged at back, 600 CFM min. recommended
Conveyor Motor:    43 in.-lb. torque,  infinitely variable, 0-10 FPM
Drive Motor (TEFC):    1-3/4 HP
Power Requirements:    110 Volt, 20 amp service
Shipping Weight (lbs):    395 (approx., varies based on how equipped)

 

What is the difference between the 19-38 Combo and the 13 inch Combo?

There are several differences between these two pieces of equipment. See the chart below for the main differences, and if you still have questions on which machine would be best for your application, please call our office.

19-38 COMBO BRUSH/DRUM SANDER

 13 in COMBO BRUSH/DRUM SANDER

Light DutyDirect Drive- Greater range of brush speed (RPM)Small brush diameter (5in)

110V, 1-3/4 HP motor

38in working width (2 passes)

4in thickness capacity

0-10 minute conveyor

 

 

 

 

 

 

 

Medium DutyBelt driven- More low-end torque (important for more aggressive
and coarse nylon applications).

Larger brush diameter (7-9 in)

  • Longer brush life
  • More aggressive brushing possible
  • Longer bristles offer deeper profile penetration

More HP per inch (potentially more aggressive)

110V- 1-3/4 HP motor

13in working width

4in thickness capacity

0-10  minute conveyor

 

 

 


What is the difference between your drum sanders and other brands?
SandSmart and Intellisand automatically adjust feed speed to help prevent burning of stock.  They also increase abrasive life and prevent damaging sander if over fed, set too deep or stock is thicker in middle or end.

All SuperMax sander have infinitely adjustable conveyor feed rates for precise settings.

All SuperMax sanders use a self-cooling drum which effectively dissipates heat from sanding, thus extending abrasive life, reducing the chance of burning and prevents over-heating and warping of the drum.

All SuperMax drum sanders are precision engineered for long life.

All SuperMax sanders use a computer balanced drum(s) and drive train components to prevent ripple on the surface of stock being processed and to extend life of bearings and other parts.

All SuperMax drum sanders use an exclusive abrasive conveyor belt which offers the best grip and no-give grip to stock being sanded.

All SuperMax drum sanders use a patented self-tightening abrasive attachment system, making the common task of changing abrasives fast, simple and tool free.

SuperMax 13 inch Combo Brush/Drum
MX-91067 13in Combo Brush/Drum Sander, 110V (** INCLUDES 1X WIRE OR NYLON BRUSH HEAD OF YOUR CHOICE at N/C )
(Backordered, Estimated Ship Date 01-12-2022)
MX-60-0420 Replacement Sanding Drum ONLY, 13in
MX-60-0400-2 Replacement Wire Brush Head ONY, 13in Wire
MX-60-0408-2 Heavy Nylon Brush Head
MX-60-0404-1 Medium Nylon Brush Head. 
MX-60-0410-1 Light Duty Nylon Brush Head.  (Backordered, Estimated Ship Date 09-23-2021)
MX-875600 Roller tables
MX-98-0118 ProScale DRO (digital read out) Depth Gauge
MX-98-0130 Caster Wheels, set of 4

 

 

Available Brushes - Call sales at 1-800-458-3687 (Samples can be provided at customers request)

  • Carbon Steel - Open and Dense Woundwire
  • Spring Steel - Fineset Wire
  • Nylon/Silicon Carbide (Typical Grit 80, 120, 240)
  • Fladder Style - Specify Grit (60-400)
  • Additional Brushes Available.
13" Flatter Strip Sets
MX-60-2540 13" Sanding Drum, (13" Combination Sander Only)
MX-60-2400 13" Flatter Strip Set,  22 ct. - 60 grit (13" Combination Sander Only) 
MX-60-2400-1 13" Flatter Strip Set,  22 ct. - 36 grit (13" Combination Sander Only) 
MX-60-2401 13" Flatter Strip Set,  22 ct. - 80 grit (13" Combination Sander Only) 
MX-60-2402 13" Flatter Strip Set,  22 ct. - 120 grit (13" Combination Sander Only) 
MX-60-2403 13" Flatter Strip Set,  22 ct. - 100 grit (13" Combination Sander Only) 
MX-60-2404 13" Flatter Strip Set,  22 ct. - 150 grit (13" Combination Sander Only) 
MX-60-2405 13" Flatter Strip Set,  22 ct. - 180 grit (13" Combination Sander Only) 
MX-60-2406 13" Flatter Strip Set,  22 ct. - 220 grit (13" Combination Sander Only) 
MX-60-2407 13" Flatter Strip Set,  22 ct. - 320 grit (13" Combination Sander Only) 
MX-60-2408 13" Flatter Strip Set,  22 ct. - 280 grit (13" Combination Sander Only) 

 

 

 

MX-91067
13 COMBO BRUSH/DRUM (INCLUDES CHOICE1 BRUSH) - SMT COMBINATION SANDERS - 1.75HP - 110V / 1PH
SOUTHERN TOOL EXCLUSIVE = FREE SHIPPING, FREE RESIDENTIAL & LIFT-GATE DELIVERY, FREE CALL AHEAD SERVICE
Mfg. item #: MX-91067
SUPMX-91067
lease to own for as little as:$90 per month!
FREE Truck Shipping to any Location within the Lower 48 States, Lift-gate included at no charge when requested1046
$4,499.00

46
MX-60-0420
13 SANDING DRUM
Mfg. item #: MX-60-0420
SUPMX-60-0420
Laguna $35 Freight Charge1065
$299.00

46
MX-60-0400-2
13 WIRE BRUSH HEAD
Mfg. item #: MX-60-0400-2
SUPMX-60-0400-2
$99.00 Freight Rate for Laguna and Supermax machines. Any accessory added to this order ships free - Includes FREE Residential, FREE Liftgate & Call Ahead Service1049
$899.00

46
MX-60-0408-2
13 HEAVY NYLON BRUSH HEAD
Mfg. item #: MX-60-0408-2
SUPMX-60-0408-2
$99.00 Freight Rate for Laguna and Supermax machines. Any accessory added to this order ships free - Includes FREE Residential, FREE Liftgate & Call Ahead Service1049
$899.00

46
MX-60-0404-1
13 MEDIUM NYLON BRUSH HEAD
Mfg. item #: MX-60-0404-1
SUPMX-60-0404-1
$99.00 Freight Rate for Laguna and Supermax machines. Any accessory added to this order ships free - Includes FREE Residential, FREE Liftgate & Call Ahead Service1049
$899.00

46
MX-60-0410-1
13 LIGHT NYLON BRUSH HEAD
Mfg. item #: MX-60-0410-1
SUPMX-60-0410-1
$99.00 Freight Rate for Laguna and Supermax machines. Any accessory added to this order ships free - Includes FREE Residential, FREE Liftgate & Call Ahead Service1049
$899.00

46
MX-875600
EXPANDABLE ROLLER CONVEYOR
Mfg. item #: MX-875600
SUPMX-875600
Laguna $35 Freight Charge1065
$250.00

46
MX-98-0118
PROSCALE? DRO DIGITAL DEPTH GAUGE0.01
Mfg. item #: MX-98-0118
SUPMX-98-0118
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

54
MX-98-0130
CASTERS SET OF 4 USE WITH OPEN STAND FOR LGUNGA DRUM SANDER
Mfg. item #: MX-98-0130
SUPMX-98-0130
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$99.00

46
MX-60-2540
13 FLAP SANDER HUB (ADD ABRASIVE STRIPS TO MAKE COMPLETE HEAD)
Mfg. item #: MX-60-2540
SUPMX-60-2540
Laguna $35 Freight Charge1065
$999.00

46
MX-60-2400
13 FLATTER STRIP SET, 24 CT. - 60 GRIT
Mfg. item #: MX-60-2400
SUPMX-60-2400
Laguna $35 Freight Charge1065
$299.00

46
MX-60-2400-1
13 FLATTER STRIP SET, 24 CT. - 36 GRIT
Mfg. item #: MX-60-2400-1
SUPMX-60-2400-1
Laguna $35 Freight Charge1065
$299.00

46
MX-60-2401
13 FLATTER STRIP SET, 24 CT. - 80 GRIT
Mfg. item #: MX-60-2401
SUPMX-60-2401
Laguna $35 Freight Charge1065
$299.00

46
MX-60-2402
13 FLATTER STRIP SET, 24 CT. - 120 GRIT
Mfg. item #: MX-60-2402
SUPMX-60-2402
Laguna $35 Freight Charge1065
$299.00

46
MX-60-2403
13 FLATTER STRIP SET, 24 CT. - 100 GRIT
Mfg. item #: MX-60-2403
SUPMX-60-2403
Laguna $35 Freight Charge1065
$299.00

46
MX-60-2404
13 FLATTER STRIP SET, 24 CT. - 150 GRIT
Mfg. item #: MX-60-2404
SUPMX-60-2404
Laguna $35 Freight Charge1065
$299.00

46
MX-60-2405
13 FLATTER STRIP SET, 24 CT. - 180 GRIT
Mfg. item #: MX-60-2405
SUPMX-60-2405
Laguna $35 Freight Charge1065
$299.00

46
MX-60-2406
13 FLATTER STRIP SET, 24 CT. - 220 GRIT
Mfg. item #: MX-60-2406
SUPMX-60-2406
Laguna $35 Freight Charge1065
$299.00

46
MX-60-2407
13 FLATTER STRIP SET, 24 CT. - 320 GRIT
Mfg. item #: MX-60-2407
SUPMX-60-2407
Laguna $35 Freight Charge1065
$299.00

46
MX-60-2408
13 FLATTER STRIP SET, 24 CT. - 280 GRIT
Mfg. item #: MX-60-2408
SUPMX-60-2408
Laguna $35 Freight Charge1065
$299.00

46
Copyright © 2021 Smith-Hamilton, Inc
0.016 210923 11:10