Shown with optional accessories
Shown with Optional Closed Stand
Simplify sanding with a 19-38 Combo Brush/Drum Sander! Our exclusive technology allows you to drum sand and profile sand on the same machine! Interchangeable drum and
brush heads allows for unlimited applications!
The 19-38 Combo comes standard as a bench-top unit and is equipped with a 180 grit flatter style head. Additional brush heads and the sanding drum are available for purchase.
Full machine features and specs can be found below.
These are just a few of the applications that are possible with the 19-38 Combo. If you are uncertain whether the 19-38 Combo will work for your application, please contact us.
What is the difference between the 19-38 Drum Sander and the 19-38 Combo Sander?
The 19-38 Drum Sander is an open-ended drum sander only; the drum is not interchangeable with any heads. The 19-38 Combo can be equipped with different brush heads for profile sanding (flatter brush head), distressing (wire brush head), cleaning reclaimed wood (nylon brush head), and sanding flat stock with a drum. The 19-38 Combo machine is equipped with an AC Inverter that allows the brushes to be run at variable speeds, whereas the 19-38 Drum Sander only runs at a constant speed.
Can I convert my 110V machine into 220V?
No. The conveyor motor and variable speed control (where applicable) are voltage-specific.
What is the difference between the 19-38 Combo and the 13 inch Combo?
There are several differences between these two pieces of equipment. See the chart below for the main differences, and if you still have questions on which machine would be best for your application, please call our office.
19-38 COMBO BRUSH/DRUM SANDER
13 in COMBO BRUSH/DRUM SANDER
Light DutyDirect Drive- Greater range of brush speed (RPM)Small brush diameter (5in)
110V, 1-3/4 HP motor
38in working width (2 passes)
4in thickness capacity
0-10 minute conveyor
Medium DutyBelt driven- More low-end torque (important for more aggressive
Larger brush diameter (7-9 in)
More HP per inch (potentially more aggressive)
110V- 1-3/4 HP motor
13in working width
4in thickness capacity
0-10 minute conveyor
What is the difference between your drum sanders and other brands?
Intellisand automatically adjust feed speed to help prevent burning of stock. They also increase abrasive life and prevent damaging sander if âover fedâ, set too deep or stock is thicker in middle or end.
All SuperMax sander have infinitely adjustable conveyor feed rates for precise settings.
All SuperMax sanders use a self-cooling drum which effectively dissipates heat from sanding, thus extending abrasive life, reducing the chance of burning and prevents over-heating and warping of the drum.
All SuperMax drum sanders are precision engineered for long life.
All SuperMax sanders use a computer balanced drum(s) and drive train components to prevent ripple on the surface of stock being processed and to extend life of bearings and other parts.
All SuperMax drum sanders use an exclusive abrasive conveyor belt which offers the best grip and no-give grip to stock being sanded.
All SuperMax drum sanders use a patented self-tightening abrasive attachment system, making the common task of changing abrasives fast, simple and tool free.
Maximum Width (in): 38 (two passes)
Minimum Length (in): 2-1/4 drum, 3-1/2 brush
Maximum Thickness (in): 4 (varies with application)
Minimum Thickness (in): 1/32
|Dimensions (in):||24H x 40W x 24D|
|Brush Speed:||AC Inverter, infinitely variable, 200-1000 RPM|
|Drum Speed:||1740 RPM|
|Dust Hood:||1- 4 inch vacuum port, min. 600 CFM recommended|
|Conveyor Motor:||Direct drive D.C. motor, ranged variable 0-10 FPM|
|Drive Motor (TEFC):||1-3/4 HP|
|Power Requirements:||110 V 20 amp|
|Shipping Weight (lbs):||242 (2 boxes) bench-top unit only|
The 19-38 Combo Brush/Drum Sander comes standard as a bench-top unit with a 180 grit flatter style head. Additional brush head styles and the drum head are available for purchase. See below for pricing information.
|19-38 Combo Brush/Drum Sander|
|MX-71938||19-38 Combo Brush/Drum Sander|
|MX-71938-7F||NEW - Open Stand Folding Tables - Fits 19-38 Drum Sander, 19-38 Combination Sander, and 25-50 Drum Sander only|
|MX-71938-7F-CL||NEW - Closed Stand Tables ONLY - Fits 19-38 Drum Sander, 19-38 Combination Sander, and 25-50 Drum Sander only|
|MX-59120||Abrasive Cleaning Stick, 8 x 1-1/2 x 1-1/2 inch|
|61-1003||Abrasive Conveyor Belt 22 (replacement)|
|MX-71938-1||19-38 Sanding Drum|
|MX-71938-3||Nylon Brush 80 grit|
|MX-71938-CL||Closed Stand with Wheels|
|MX-71938-DRO||Digital Depth Gauge|
|MX-71938-OP||19-38 Open Stand with Shelf|
|MX-98-0130||Caster Wheels (4)|
|See Below||Pre-Cut Abrasive Rolls, 36-220 grit (specify), three wraps in a box|
|Call and Specify||Replacement flatter strips, 80-320 grit (specify), 12 count|
|Pre-Cut Abrasive Wraps- 19-38 Drum Sander|
|60-19-060||60 Grit: SuperMax 19-38 inch , 3-Wraps in Box|
|60-19-080||80 Grit: SuperMax 19-38 inch , 3-Wraps in Box|
|60-19-100||100 Grit: SuperMax 19-38 inch , 3-Wraps in Box|
|60-19-120||120 Grit: SuperMax 19-38 inch , 3-Wraps in Box|
|60-19-150||150 Grit: SuperMax 19-38 inch , 3-Wraps in Box|
|60-19-180||180 Grit: SuperMax 19-38 inch, 3-Wraps in Box|
|60-19-220||220 Grit: SuperMax 19-38 inch , 3-Wraps in Box|
|MX-60-2100||Flatter Strips, 19 inch, 12 ct. 100 grit (Fits 19-38 Combo only)|
|MX-60-2120||Flatter Strips, 19 inch, 12 ct. 120 grit (Fits 19-38 Combo only)|
|MX-60-2150||Flatter Strips, 19 inch, 12 ct. 150 grit (Fits 19-38 Combo only)|
|MX-60-2180||Flatter Strips, 19 inch, 12 ct. 180 grit (Fits 19-38 Combo only)|
|MX-60-2220||Flatter Strips, 19 inch, 12 ct. 220 grit (Fits 19-38 Combo only)|
|MX-60-2280||Flatter Strips, 19 inch, 12 ct. 280 grit (Fits 19-38 Combo only)|
|MX-60-2320||Flatter Strips, 19 inch, 12 ct. 320 grit (Fits 19-38 Combo only)|
|MX-60-2060||Flatter Strips, 19 inch, 12 ct. 60 grit (Fits 19-38 Combo only)|
|MX-60-2080||Flatter Strips, 19 inch, 12 ct. 80 grit (Fits 19-38 Combo only)|