Thern Portable Davit Cranes
Lift up to 1 ton with one of these durable portable davit cranes. Thern davit cranes make any operation simple and affordable with trouble-free setup and breakdown for easy transport between multiple service sites. We offer a wide variety of options and accessories to meet your specific requirements.
How to build the Portable David Crane to meet your needs ?
1. What capacity do I need (How much weight am I going to lift) ?
2. How do I want to lift that load (Hand winch or power winch) ?
3. What Finish is required (Is this for Marine or perhaps a Corrosive environment) ?
4. How do I want to mount this (Wall or Flush Mount)
5. How much wire rope do I need (How high am I lifting the material) ?
Features
|
|
Hand or Power Winch Operation
Up to 1000 lbs capacity
Shorter horizontal reach than the Commander Series, the Ensign 1000 features increased vertical hook height for clearing tall objects, such as hand rails, or lifting tall loads.
Features
Thern products are not for lifting people, or things over people.
IMPORTANT:It is the owners or operators responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owners Manual supplied with the equipment before operating |
Ensign 1000 Lift Below Floor Level2 |
||||||||||||
Lift Below Floor Level1 |
Wire Rope Diameter |
Wire Rope Length3 |
Winch Configurations |
|||||||||
Min Pos B4 |
Max Pos B1 |
M1 |
M2 |
M3 |
E2 |
E4 |
||||||
(ft) |
(m) |
(ft) |
(m) |
(in) |
(mm) |
(ft) |
(m) |
|||||
5 |
1.5 |
9 |
2.7 |
3/16 |
5 |
28 |
8.5 |
⢠|
â |
⢠|
â |
⢠|
13 |
3.9 |
17 |
5.1 |
3/16 |
5 |
36 |
10.9 |
⢠|
â |
⢠|
â |
⢠|
22 |
6.7 |
26 |
7.9 |
3/16 |
5 |
45 |
13.7 |
⢠|
â |
⢠|
â |
⢠|
37 |
11.2 |
41 |
12.4 |
3/16 |
5 |
60 |
18.2 |
⢠|
â |
⢠|
â |
⢠|
52 |
15.8 |
56 |
17.0 |
3/16 |
5 |
75 |
22.8 |
⢠|
â |
⢠|
â |
⢠|
67 |
20.4 |
71 |
21.6 |
3/16 |
5 |
90 |
27.4 |
⢠|
â |
⢠|
â |
⢠|
97 |
29.5 |
101 |
30.7 |
3/16 |
5 |
120 |
36.5 |
â |
â |
â |
â |
⢠|
For long lifts up to 240 feet (73.1 m), please contact the factory. |
||||||||||||
5 |
1.5 |
9 |
2.7 |
1/4 |
6 |
28 |
8.5 |
â |
⢠|
⢠|
⢠|
⢠|
13 |
3.9 |
17 |
5.1 |
1/4 |
6 |
36 |
10.9 |
â |
⢠|
⢠|
⢠|
⢠|
22 |
6.7 |
26 |
7.9 |
1/4 |
6 |
45 |
13.7 |
â |
⢠|
⢠|
⢠|
⢠|
37 |
11.2 |
41 |
12.4 |
1/4 |
6 |
60 |
18.2 |
â |
⢠|
⢠|
⢠|
⢠|
52 |
15.8 |
56 |
17.0 |
1/4 |
6 |
75 |
22.8 |
â |
â |
â |
â |
⢠|
5 |
1.5 |
9 |
2.7 |
5/16 |
8 |
28 |
8.5 |
⢠|
â |
⢠|
â |
⢠|
13 |
3.9 |
17 |
5.1 |
5/16 |
8 |
36 |
10.9 |
⢠|
â |
⢠|
â |
⢠|
22 |
6.7 |
26 |
7.9 |
5/16 |
8 |
45 |
13.7 |
â |
â |
â |
â |
⢠|
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 2 Performance Characteristics are for standard products referred to in the ownerâs manual. Non-standard products may vary from the original design. Contact Southern Tool, Inc. for this information. 3 Wire rope assemblies include a hood and swaged ball fitting to work with quick-disconnect anchor on winches, cable spooler and wire rope keeper. 316SS wire rope is also available. Please contact the factory. |
||||||||||||
Pedestal Mount Performance Ratings2 |
||||||
Boom Position |
Load Rating |
Hook Reach |
Hook Height |
|||
(lb) |
(kg) |
(in) |
(mm) |
(in) |
(mm) |
|
A-1 |
1200 |
544 |
26 |
660 |
93 |
2362 |
A-2 |
1000 |
453 |
32 |
812 |
98 |
2489 |
A-3 |
800 |
362 |
39 |
990 |
104 |
2641 |
A-4 |
650 |
294 |
48 |
1219 |
112 |
2844 |
B-1 |
1200 |
544 |
22 |
558 |
97 |
2463 |
B-2 |
1000 |
453 |
26 |
660 |
103 |
2616 |
B-3 |
800 |
362 |
32 |
812 |
110 |
2794 |
B-4 |
650 |
294 |
39 |
990 |
120 |
3048 |
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, 2 Performance Characteristics are for standard products. Non-standard products may vary from the original design. Contact Southern Tool, Inc. for this information. |
||||||
Flush/Wall Mount Performance Ratings2 |
||||||
Boom Position |
Load Rating |
Hook Reach |
Hook Height |
|||
(lb) |
(kg) |
(in) |
(mm) |
(in) |
(mm) |
|
A-1 |
1200 |
544 |
26 |
660 |
79 |
2007 |
A-2 |
1000 |
453 |
32 |
812 |
84 |
2134 |
A-3 |
800 |
362 |
39 |
990 |
90 |
2286 |
A-4 |
650 |
294 |
48 |
1219 |
98 |
2489 |
B-1 |
1200 |
544 |
22 |
558 |
83 |
2108 |
B-2 |
1000 |
453 |
26 |
660 |
89 |
2261 |
B-3 |
800 |
362 |
32 |
812 |
96 |
2438 |
B-4 |
650 |
294 |
39 |
990 |
106 |
2692 |
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, 2 Performance Characteristics are for standard products. Non-standard products may vary from the original design. Contact Southern Tool, Inc. for this information. |
How to build the Portable David Crane to meet your needs ?
1. What capacity do I need (How much weight am I going to lift) ?
2. How do I want to lift that load (Hand winch or power winch) ?
3. What Finish is required (Is this for Marine or perhaps a Corrosive environment) ?
4. How do I want to mount this (Wall or Flush Mount)
5. How much wire rope do I need (How high am I lifting the material) ?
5PT10 Popular Configurations | |
---|---|
5PT10-M1 | up to 1000 lb davit crane with M4312PB with K spur gear hand winch |
5PT10G-M1 | up to 1000 lb davit crane with M4312PB with K spur gear hand winch with galvanized finish |
5PT10-M2 | up to 1000 lb davit crane with 4WM2 with K worm gear hand winch |
5PT10S-M3 | up to 1000 lb davit crane with M4312PBSS with K spur gear hand winch with stainless steel |
5PT10-E4 | up to 1000 lb davit crane with 4777 with K electric winch |
Crane Components | |
5PT10 | up to 1000 lb with portable davit with base model with powder coated with no winch |
M1 | M4312PB with K with spur gear hand winch only with zinc plated |
M2 | 4WM2 with K with worm gear hand winch only with powder coated (for epoxy finish call factory) |
M3 | M4312PBSS with K with spur gear hand winch only with stainless steel |
E2 | 4WP2 with K electric winch with 115/1/60 VAC with 6 ft pendant control with enamel |
E2X | 4WP2 with K electric winch with 115/1/60 VAC with 6 ft pendant control with epoxy |
E4 | 4777 with K electric winch with 115/1/60 VAC with 6 ft pendant control with enamel |
E4X | 4777 with K electric winch with 115/1/60 VAC with 6 ft pendant control with epoxy |
E4DC | 4777DC with K electric winch with 12 volt DC with 10 ft pendant control with enamel |
G | galvanized finish with on crane only |
S | 304 stainless steel construction with on crane only |
5BP10 | pedestal base with powder coat finish with upright mount |
5BP10G | pedestal base with galvanized finish with upright mount |
5BP10S | pedestal base with stainless steel with upright mount |
5BF10 | socket base with powder coat finish with flush mount |
5BF10G | socket base with galvanized finish with flush mount |
5BF10S | socket base with stainless steel with flush mount |
5BW10 | wall mount base with powder coat finish |
5BW10G | wall mount base with galvanized finish |
5BW10S | wall mount base with stainless steel |
5BR10 | wheel base with enamel finish |
RK19 WITH 25S | wire rope keeper with stainless 304SS |
RW50 | cable spool with stainless steel 316SS |
ED300 WITH DW11 | drill with motor drive with 11.5 amp, 400 rpm with 120 VAC with 1 1/8" hex socket drive |
ED400 WITH DW07 | drill with motor drive with 7 amp, 400 rpm with 120 VAC with 1 1/8" hex socket drive with for 4WM2 ONLY |
Winch (Except on the popular configuration models) Pedestal Base and Wire Rope Sold SEPARATELY
3/16 in Wire Rope Assemblies for the THERN Davit Crane | |
---|---|
WA19-20NS | 3/16 in x 20 ft galvanized aircraft cable with swivel hook and swaged ball |
WA19-28NS | 3/16 in x 28 ft galvanized aircraft cable with swivel hook and swaged ball |
WA19-36NS | 3/16 in x 36 ft galvanized aircraft cable with swivel hook and swaged ball |
WA19-45NS | 3/16 in x 45 ft galvanized aircraft cable with swivel hook and swaged ball |
WS19-20NO | 3/16 in x 20 ft 304 stainless steel wire rope with SS oval hook and swaged ball |
WS19-28NO | 3/16 in x 28 ft 304 stainless steel wire rope with SS oval hook and swaged ball |
WS19-36NO | 3/16 in x 36 ft 304 stainless steel wire rope with SS oval hook and swaged ball |
WS19-45NO | 3/16 in x 45 ft 304 stainless steel wire rope with SS oval hook and swaged ball |
WS19-60NO | 3/16 in x 60 ft 304 stainless steel wire rope with SS oval hook and swaged ball |
WS19-75NO | 3/16 in x 75 ft 304 stainless steel wire rope with SS oval hook and swaged ball |
1/4 in Wire Rope Assemblies for the THERN Davit Crane | |
---|---|
WA25-20NS | 1/4 in x 20 ft with galvanized aircraft cable with swivel hook and swaged ball |
WA25-28NS | 1/4 in x 28 ft with galvanized aircraft cable with swivel hook and swaged ball |
WA25-36NS | 1/4 in x 36 ft with galvanized aircraft cable with swivel hook and swaged ball |
WA25-45NS | 1/4 in x 45 ft with galvanized aircraft cable with swivel hook and swaged ball |
WA25-60NS | 1/4 in x 60 ft with galvanized aircraft cable with swivel hook and swaged ball |
WA25-75NS | 1/4 in x 75 ft with galvanized aircraft cable with swivel hook and swaged ball |
WS25-20NE | 1/4 in x 20 ft with 304 stainless steel wire rope with SS eye hook and swaged ball |
WS25-28NE | 1/4 in x 28 ft with 304 stainless steel wire rope with SS eye hook and swaged ball |
WS25-36NE | 1/4 in x 36 ft with 304 stainless steel wire rope with SS eye hook and swaged ball |
WS25-45NE | 1/4 in x 45 ft with 304 stainless steel wire rope with SS eye hook and swaged ball |
WS25-60NE | 1/4 in x 60 ft with 304 stainless steel wire rope with SS eye hook and swaged ball |
WS25-75NE | 1/4 in x 75 ft with 304 stainless steel wire rope with SS eye hook and swaged ball |