Call 1–800–458–3687 or  Email us!

USI 2VH-3 Milling Machine

milling machine

dro electrical cabinet close up
SINO 3-Axis digital readout measure table, cross and knee travel, inch/metric, and multi-functionality Electrical Cabinet  Control and accessory power transformer, circuit breakers and main disconnect Detail of work light, digital readout, collet rack, table feed, coolant nozzle, way cover, ram and spindle

 

STANDARD FEATURES AND EQUIPMENT: (KIT PACKAGE ONLY)

  • 9 x 49 inch table with 3 T-slots, 5/8 inch, on 2.5 inch centers Table travel is 33 inch. Leadscrew pitch is 5TPI with dials on each end graduated in .001 inch.
  • Travel of crossfeed is 12 inch with .001 inch dial graduations
  • Knee travel is 15.74 inch with 10TPI leadscrew, .001 inch dial graduations
  • Ram allows for over 12 inch of travel, for variable throat depth
  • Conventional dovetail ways on X, Y and Z Axis, Double locks on all axis
  • Aged stressed castings, stress relieved for long life and accuracy, Meehanite type
  • Power quill feed allows for 0.0018, 0.003, 0.006 Inches of feed per revolution of spindle
  • Hardened and ground and precisely scraped work table, saddle and knee ways
  • Centralized one-shot lubrication pump lubricates all way surfaces and leadscrews
  • Backlash adjustment for leadscrews, Gib adjustments for ways
  • Electrical cabinet with internal transformer for 110V and 24V devices, circuit breaker protected, Low Voltage controls, 24 volt halogen machine light. Transformer also includes power supply for digital readout and power table feed.
  • Operator low voltage controls for coolant pump, machine light, main power with emergency stop button. Spindle off/forward/reverse switch.
  • Built in coolant tank base with coolant pump, pressure and return hose , nozzle and valve, Installed and ready to use. Base chip pan to help prevent coolant overflow.
  • Manual variable speed spindle drive, 3 Horsepower runs the spindle from 60 to 4200 RPM. Spindle speed dial on head shows RPM in direct drive and back gear. Spindle motor is finned for cooling.
  • Sino three axis digital readout has 0.0002 inch resolution. Readout comes mounted to knee, table and cross and is ready to use. The readout is inch/metric switchable, with absolute incremental function. There is a calculator function, bolt hole pattern function, line pattern function, and arc calculate function. A comprehensive manual is included.
  • Power table feed is Align model AL500SP. Infinitely variable feed from .8 to 32 IPM with rapid button, on/off switch, and adjustable travel stops. This heavy duty power feed has 150 inch pounds of torque, with max to 650. Power table feed comes installed on machine, ready to use.
  • Toolbox and tools, manuals, electrical drawing, test certificate all included.

2VH-3-KIT
9 X 49 KNEE MILLING MACHINE 3-AXIS SINO DRO & X-POWERFEED 3HP / 3 PH
Mfg. item #: 2VH-3-KIT
USI2VH-3-KIT
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

626
Copyright © 2025 Smith-Hamilton, Inc
0.002 221128 11:24