Technical Sales 1–800–458–3687

US Jack Transmission Jacks and Under Hoist Jacks

1 Ton Transmission Jack

Accessory items shown provide versatility in handling a broad range of transmissions.

1 Ton Transmission Jack

  • Wide base for stability.
  • 360 degree pump handle rotation for flexibility in operation.
  • D-51404 has 4 inch diameter ball bearing casters. Head can be tilted 18 degrees forward 15 degrees back and 15 degrees to either side
  • Repair kit 5-569
1 Ton Transmission Jack
Model Capacity Use Low height Raised height Chassis L x W Caster Dia Shipping weight
D-51404 2000 lbs Truck and Bus 9-1/4 in 35-3/16 inch 47-1/4 x 23-5/8 in 4 in 255 lbs

Low Boy Transmission Jacks

LOW BOY TRANSMISSION JACKS

MODEL 57200  Made in USA
1-1/2 TON CAPACITY
INTENDED USE For heavy truck transmissions. Ideally suited for truck dealers, maintenance and heavy duty transmission repair centers.

FEATURES

  • Wide chassis with open front provides: Wider opening for saddle and transmission to come lower to the ground for easy removal. Efficient load distribution and stability. Easy access to saddle tilt knobs.
  • Fully adjustable universal saddle with adjustable arms to position the transmission.
  • Heavy duty chain with convenient chain tensioner secures load to the saddle.
  • Safety by-pass system prevents damage to the hydraulic cylinder
  • Safety overload system prevents jack from being used beyond its rated capacity.
  • Full 360 degree rotating handle operates in any position.
  • Flashed chrome ram inhibits rust from entering the hydraulic system.
  • Four full-swivel ball bearing caster wheels for easy positioning.
wide stance low boy transmission jacks

MODEL 57201 Made in USA
1-1/2 TON CAPACITY  WIDE STANCE
INTENDED USE Same as the model 57200 but with a wider chassis opening plus a broader lift range to handle a larger variety of transmission configurations.

  • Fully adjustable saddle with adjustable angle brackets to position the transmission.
  • Four 4 inch high riser tubes to handle transmissions with offset transfer cases.
  • Four heavy duty ratchet tie-downs conveniently secure the load to the lifting saddle.
  • Safety by-pass and overload systems to prevent cylinder damage and prevent the jack from being used beyond its rated capacity.
  • Full 360 degree rotating handle operates in any position.
  • Flash chromed ram inhibits rust from entering the hydraulic system
  • Four full-swivel ball bearing caster wheels for easy positioning.
Specifications models 57200 and 57201
Model 57200 57201
Capacity ton 1-1/2 1-1/2
Lift Range Low (in) 7-3/4 4-3/4
Lidt Range High (in) 36-1/2 36-1/2
Caster Wheel Dia (in) 4 4
Chassis Width (in) 28 32-3/4
Chassis Lenght (in) 45 43-1/4
Saddle Size Lenght (in) 15-1/4 15-1/4
Saddle Tilt Fwd (deg) 27 20
Saddle Tilt Back (deg) 17 20
Saddle Tilt Side (+ / - deg) 15 11
Shipping Weight (lbs) 310 414

 

UNDER HOIST TRANSMISSION JACKS

 

Telescopic 1/2 Ton Capacity Single Pump UNDER HOIST TRANSMISSION JACKS

MODEL 57250 IMPORT - Telescopic 1/2 Ton Capacity Single Pump

INTENDED USE: Designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on passenger cars, vans, and light trucks that are raised by an inground or above-ground lift
 

FEATURES

  • Fully adjustable universal saddle with hand adjustable corner brackets and safety chain.
  • Safety overload systems prevents jack from being used beyond its rated capacity.
  • Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission.
  • Two-stage flash chromed rams inhibit rust from entering hydraulic system.
  • Wide base with four easy rolling 4 inch diameter swivel ball bearing casters wheels, provide stability and easy maneuvering.
  • Polyurethane wheels provide protection for tile and epoxy floors
Telescopic 1/2 Ton Capacity double Pump UNDER HOIST TRANSMISSION JACKS

MODEL 57255 IMPORT - Telescopic 1/2 Ton Capacity Double Pump

INTENDED USE Designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on passenger cars, vans, and light trucks that are raised by an in-ground or above-ground lift
 

FEATURES

  • Fully adjustable universal saddle with hand adjustable corner brackets and safety chain.
  • Safety overload systems prevents jack from being used beyond its rated capacity.
  • Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission.
  • Two-stage flash chromed rams inhibit rust from entering hydraulic system.
  • Wide base with four easy rolling 4 inch diameter swivel ball bearing casters wheels, provide stability and easy maneuvering.
  • Two times faster rising action as model 57250 with no load or a load up to 400 pounds.
  • Same rising action as model 57250 for loads between 400 and 1,000 pounds.
  • Polyurethane wheels provide protection for tile and epoxy floors
1 Ton Capacity UNDER HOIST truck TRANSMISSION JACKS

MODEL 57270 IMPORT 1 TON CAPACITY

INTENDED USE: Designed for the removal, installation and transportation (in the lowered position) of
heavy duty truck transmissions that are raised by an in-ground or above ground lift

FEATURES

  • Fully adjustable universal saddle with adjustable corner brackets and safety chain.
  • Safety overload system prevents jack from being used beyond its rated capacity.
  • 2 inch diameter, flash chromed, single stage ram provides added stability throughout the entire lift range.
  • Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission.
  • Wide base with four 3-7/8 inch diameter heavy duty swivel ball bearing caster wheels provides stability and easy maneuvering.
Specifications
Model 57250 57255 57270
Capacity ton 1/2 1/2 1
Lift Range Low (in) 35 35 45.75
Lift Range High (in) 72 72 74.25
Base Size (in) 34 x 37 34 x 37 38 x 38
Saddle Tilt Fwd (deg) 42 42 45
Saddle Tilt Back (deg) 46 46 24
Saddle Tilt Side (+ / - deg) 72 72 22
Shipping Weight (lbs) 176 178 292
Optional Adapters for 57250 and 57255
MODEL 57202 DIFFERENTIAL ADAPTER MODEL 57202  DIFFERENTIAL ADAPTER Made in USA
Differential adapter is used with Models 57200 and 57270.
Adapter fits most differentials and replaces the universal saddle
when used. Weight 29 lbs.
MODEL 57203 FULLER EATON ROADRANGER ADAPTER MODEL 57203 FULLER EATON ROADRANGER ADAPTER
Made in USA
Used with Model 57200 . Weight 21 lbs.
CD4E VEHICLE APPLICATION TRANSMISSION ADAPTER

MODEL 57205 Made in USA For use on Ford CD4E Weight 17 lbs.

CD4E VEHICLE APPLICATION:
1994-2002 Mazda 626 4-cylinder
1994-1997 Mazda MX-6 4-cylinder
1994-1997 Ford Probe 4-cylinder
1995-2000 Ford Contour
1995-2000 Mercury Mystique
1995-2007 Ford Mondeo
(up to Mondeo III 4 cylinder model)
1999-2002 Mercury Cougar
2001-2007 Ford Escape
2001-2006 Mazda Tribute
2005-2007 Mercury Mariner

FUEL TANK SADDLE

MODEL 57208  FUEL TANK SADDLE Made in USA

INTENDED USE An optional saddle adapter which is used in conjunction with Models 57250 and 57255 transmission jack to remove, install and transport (in the lowered position) automobile and light truck emptied fuel tanks and other undercar components. Weight 37 lbs.

FEATURES

  • Handles automotive and light duty truck fuel tanks up to 40 gallon capacity. Tanks are to be emptied before handling.
  • Four adjustable support risers with rubber pads protect the fuel tank and can be quickly positioned to fit many shapes and sizes.
  • Includes two load restraint straps.
Transmission Adapters

Model 57210 Transmission Adapters Made in USA

For use on Ford E40D and 4R100(4 wheel drive) truck and van transmissions Weight 37 lbs.

Transmission Adapters

Model 57209 Transmission Adapters Made in USA 

For use on Ford 5R55W, 4R70W, AX4N, AXOD METRIC transmissions. This one adapter can quickly and easily be adjusted to fit four different transmission configurations. Weight 38 lbs

Transmission Adapters

Model 57204 Transmission Adapters Made in USA

For use on Ford 6R140 Transmissions weight 32 lbs

QUICK-ADJUST SADDLE

Model 57206 IMPORT  QUICK-ADJUST SADDLE

INTENDED USE An optional saddle that replaces the 4 adjustable corner brackets found on the standard universal saddle Weight 19 lbs.

FEATURES

  • Quickly adapts to the existing universal saddle plate
  • Four low profile ratcheting arms quickly and easily adjust to the transmission pan configuration.
57280 engine stand 2000 capacity

MODEL 57280 IMPORT 2,000 LBS CAPACITY
INTENDED USE: A twin-post design capable of handling large automotive engines and small diesel engines ranging between 1,250 and 2,000 pounds

FEATURES

  • Includes two universal mounting plates, rotating shaft, eight fully adjustable arms and all the related mounting hardware.
  • Rotating shaft with mounting plate telescopes inside the post receiver for fine adjustment when mounting ends or sides of engines. Mounting plates can be adjusted 36-1/4 inch apart.
ENGINE MOUNTING ADAPTERS Model 57281 Optional Engine Mounting Adapters For Model 57280 Made USA
Ford 6.0L and 6.4L Engine Adapter for 57280
Weight 31 lbs
ENGINE MOUNTING ADAPTERS MODEL 57282 Optional Engine Mounting Adapters For Model 57280 Made USA
Ford 6.2L Engine Adapter for 57280
Weight 37 lbs
Optional Engine Mounting Adapters MODEL 57283 Optional Engine Mounting Adapters For Model 57280 Made USA
Ford 6.7L Engine Adapter for 57280
Weight 37 lbs.

 

Models and Accessories
D-51404 Low-boy transmission jack with jack-sack LOW-BOY TRUCK TRANSMISSION JACKS Made in USA - Shipping Wieght 255 Lbs
57200 7.75  collapsed x 25 W x 45 inch L LOW-BOY TRUCK TRANSMISSION JACKS  Made in USA - Shipping Wieght 310 Lbs
57201 4.75 inch collapsed x 32.75 W x 43.25 inch L LOW-BOY TRUCK TRANSMISSION JACKS  Made in USA - Shipping Wieght 414 Lbs
57250  1/2  Ton - Hyd. telescopic - single pump (IMPORT) UNDER HOIST TRANSMISSION JACKS  Shipping Weight 176 Lbs
57255  1/2  Ton - Hyd. telescopic - double pump (IMPORT) UNDER HOIST TRANSMISSION JACKS Shipping Weight 178 Lbs
57270 1  Ton - Hyd. Single stage - single pump (IMPORT) UNDER HOIST TRUCK TRANSMISSION JACKS  - Pricing includes Handle  Shipping Weight 292 Lbs
57202 Differential adapter   Shipping Weight 29 Lbs
57203 Fuller Eaton Roadranger adapter  Shipping Weight 21 Lbs
57205 Opt. trans. Adapter - Ford CD4E transmissions  Shipping Weight 17 Lbs
57208 Opt. fuel tank saddle adapter  Shipping Weight 37 Lbs
57210 Opt. trans. Adapter - Ford E4OS & 4R100  Shipping Weight 37 Lbs
57209 Opt. trans. Adapter - Ford 5R55W, 4R70W, AX4N, AXOD metric transmissions  Shipping Weight 38 Lbs
57204 Opt. trans. Adapter - Ford 6R140 transmission  Shipping Weight 32 Lbs
57206 Quick-adjust saddle Shipping Weight 19 Lbs
57280 2,000 lb. capacity - 2 post design (IMPORT)  Shipping Weight 273 Lbs
57281 Opt. eng. Adapt. - Ford 6.0 & 6.4L engines  Shipping Weight 31 Lbs
57282 Opt. eng. Adapt. - Ford 6.2L engine **Shipping Weight 37 Lbs
57283 Opt. eng. Adapt. - Ford 6.7L engine  Shipping Weight 37 Lbs

 

D-51404
9.25 LOW/ 35.1875 HIGH; 23.625 W X 47.25 L
Mfg. item #: D-51404
USJD-51404
lease to own for as little as:$74 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,687.50

54
57200
1.5 TON TRUCK TRANS. JACK 7.75 LOW/ 36.5 HIGH; 28 W X 45 L - TRUCK HYDRAULIC TRANSMISSION JACK - USA MADE **WT 310 LBS.
Mfg. item #: 57200
USJ57200
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,437.50

54
57201
1.5 TON 4.75 LOW/ 36.5 HIGH; 32.75 W X 43.25 L X 12 H - LOW-BOY HYDRAULIC TRANSMISSION JACK - USA MADE *** MAY DROP SHIPS FROM SUPPLIERS WAREHOUSE *** **WT 414 LBS.
Mfg. item #: 57201
USJ57201
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,437.50

54
57250
1/2 TON HYD. TELESCOPIC - SINGLE PUMP (IMPORT) - UNDER HOIST AUTOMOTIVE TRANSMISSION JACKS **WT 176 LBS.
Mfg. item #: 57250
USJ57250
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,250.00

54
57255
1/2 TON HYD. TELESCOPIC - DOUBLE PUMP (IMPORT) - UNDER HOIST AUTOMOTIVE TRANSMISSION JACKS **WT 178 LBS.
Mfg. item #: 57255
USJ57255
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,343.75

54
57270
1 TON HYD. SINGLE STAGE - SINGLE PUMP (IMPORT) UNDER HOIST TRUCK TRANSMISSION JACK **WT 292 LBS.
Mfg. item #: 57270
USJ57270
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,875.00

54
57202
DIFFERENTIAL ADAPTER FOR 57200 OR 57270 ONLY - OPTIONAL ADAPTORS & SADDLES FOR UNDER HOIST TRANSMISSION JACKS - USA MADE **WT 29 LBS.
Mfg. item #: 57202
USJ57202
"Ships by UPS, see freight calculator at checkout."2
$312.50

54
57203
FULLER EATON ROADRANGER ADAPTER FOR 57200 ONLY - OPTIONAL ADAPTORS & SADDLES FOR UNDER HOIST TRANSMISSION JACKS - USA MADE **WT 21 LBS.
Mfg. item #: 57203
USJ57203
"Ships by UPS, see freight calculator at checkout."2
$343.75

54
57205
FORD CD4E ADAPTOR - OPTIONAL ADAPTORS & SADDLES FOR UNDER HOIST TRANSMISSION JACKS - USA MADE **WT 17 LBS.
Mfg. item #: 57205
USJ57205
"Ships by UPS, see freight calculator at checkout."2
$312.50

54
57208
FUEL TANK SADDLE - OPTIONAL ADAPTORS & SADDLES FOR UNDER HOIST TRANSMISSION JACKS - USA MADE **WT 37 LBS.
Mfg. item #: 57208
USJ57208
"Ships by UPS, see freight calculator at checkout."2
$312.50

54
57210
FORD E4OD TRUCK & 4R100 4X4 ADAPTOR F250-F550 S.D. - OPTIONAL ADAPTORS & SADDLES FOR UNDER HOIST TRANSMISSION JACKS - USA MADE **WT 37 LBS.
Mfg. item #: 57210
USJ57210
"Ships by UPS, see freight calculator at checkout."2
$250.00

54
57209
FORD 5R55W, 4R70W, AX4N, AXOD METRIC ADAPTOR - OPTIONAL ADAPTORS & SADDLES FOR UNDER HOIST TRANSMISSION JACKS - USA MADE **WT 38 LBS.
Mfg. item #: 57209
USJ57209
"Ships by UPS, see freight calculator at checkout."2
Call for Price

54
57204
FORD 6R140 ADAPTOR - OPTIONAL ADAPTORS & SADDLES FOR UNDER HOIST TRANSMISSION JACKS - USA MADE **WT 32 LBS.
Mfg. item #: 57204
USJ57204
"Ships by UPS, see freight calculator at checkout."2
$375.00

54
57206
QUICK-ADJUST SADDLE (IMPORT) - QUICK-ADJUST UNIVERSAL SADDLE FOR UNDER HOIST TRANSMISSION JACKS - IMPORT **WT 19 LBS.
Mfg. item #: 57206
USJ57206
"Ships by UPS, see freight calculator at checkout."2
$187.50

54
57280
2,000 LB. CAPACITY - 2 POST DESIGN (IMPORT) **SHIPPING WEIGHT 273 LBS
Mfg. item #: 57280
USJ57280
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,827.75

409
57281
OPT. ENG. ADAPT. - FORD 6.0 & 6.4L ENGINES **SHIPPING WEIGHT 31 LBS
Mfg. item #: 57281
USJ57281
"Ships by UPS, see freight calculator at checkout."2
$426.25

909
57282
OPT. ENG. ADAPT. - FORD 6.2L ENGINE **SHIPPING WEIGHT 37 LBS
Mfg. item #: 57282
USJ57282
"Ships by UPS, see freight calculator at checkout."2
$458.75

909
57283
OPT. ENG. ADAPT. - FORD 6.7L ENGINE **SHIPPING WEIGHT 37 LBS
Mfg. item #: 57283
USJ57283
"Ships by UPS, see freight calculator at checkout."2
$490.00

909
Copyright © 2021 Smith-Hamilton, Inc
0.015 201029 09:35