Technical Sales 1–800–458–3687

Van-Mark Trim-A-Slitters

*Includes 2 Booster Blocks

trim-a-slitter-perf-combo
Core Combo Perf Combo

 

Models
Core Specs
Model Length Arbor Weight
S14B 14 inch (35.5 cm) 1.5 inch 36 lbs (16.4 kg)
S24B 24 inch (61.0 cm) 1.5 inch 56 lbs (25.5 kg)
S24C 24 inch (61.0 cm) 2 inch 74 lbs (33.6 kg)
S36C 36 inch (91.4 cm) 2 inch 103 lbs (46.8 kg)
S48CB 48 inch (121.9 cm) 2 inch 131 lbs (59.5 kg)
Combo
SCI48 48 inch (121.9 cm) (of Slitter) 2 inch 265 lbs (120.5 kg)
Perf Combo
SCI24HD 24 inch (61.0 cm) (of Slitter) 2 inch 188 lbs (85.5 kg)

Note: accessories may be incompatible with older Van-Mark products.

  • Additional slitter knives may be added to any Trim-A-Slitter to increase productivity when slitting or ribforming.
  • Manual operation allows use of slitter without a power source. Optional motor available in regular and heavy duty models to help increase production.
  • 2 knives are required for each additional cut and 3 knives are required for each additional rib.
  • (please contact the factory for assistance on capacities when adding additional knives for slitting, ribforming, or perforating.)
Slitter Motor Kits
Motor No USe  Motor
3521 Standard motor fits all slitter models. 115V, Single ph, 60 Hz, 32 Ft / Min
3522 For all slitters where 50 HZ is required. 230V, Single ph, 50 Hz, 26 Ft / Min
3535 Heavy-duty use for all slitters. Required when perforating steel. 115V, Single ph, 60 Hz, 35 Ft / Min
3533 Heavy-duty use for all slitters. Required when perforating steel. For all slitters where 50 HZ is required. 230V, Single ph, 50 Hz, 35 Ft / Min

 Note: All motor kits come complete with coupling and mounting hardware.

Slitter Add-Ons and Accessories
Part No Name Uses Slitters / Arbor Sizes Packaged
5034 Slitter Knife 2 required (1 upper and 1 lower) per each additional cut. 3 required for each additional rib. All B model slitters with 1.5 inch arbors 1 each
Slitter Knife 2 required (1 upper and 1 lower) per each additional cut.
3 required for each additional rib.
All C model slitters with 2 inch arbors 1 each
3007 Perforator Die Set For perforating most light to medium construction grade materials. Provides 3.36 inches of net free area per foot running foot. All B model slitters with 1.5 inch arbors 1 Male
1 Female
Perforator Die Set For perforating most light to medium construction grade materials. Provides 3.36 inches of net free area per running foot All C model slitters with 2 inch arbors 1 Male
1 Female
Stripper Installs with perforators to prevent materials from winding on rolls. All slitters and perforator sets 1 each
3578 Booster Block (2) Recommended. Provides support under arbors to increase slitting capacity on 48 inch, 60 inch, and 72 inch slitters. All C model slitters with 2 inch arbor shafts 1 each
Capacity Booster Helps prevents arbors from spreading during slitting operation. Installs in conjunction with 1 set of slitting knives All C model slitters with 2 inch arbor shafts. 1 each

 

 

*Includes 2 Booster Blocks

Model S24C includes 2" shafts. Slitter shown with optional HD motor kit and perforator rolls.

  Slitter shown with optional HD motor kit and perforator rolls.

All Van Mark Brakes, Tools and Accessories are
Manufactured AND Assembled in the USA!

Click Here to Download

Increase your productivity onsite or in your shop. The Trim-A-Slitter from Van Mark is designed to slit or stiffen aluminum, steel vinyl, or other materials, coil or sheet, quickly and accurately. Helps to increase longevity of your brake by eliminating the practice of scoring the aluminum, which can damage the bending hinge by repeated use, when using a utility knife. Available in 14 inch, 24 inch, 36 inch, and 48 inch heavy duty models. There is a size for any particular cutting demand. Contact Van Mark today to find out how the Trim-A-Slitter will increase both your productivity and your profits. We invite you to contact our sales professionals of your local distributor today to assist you with capacities and capabilities of any slitter and to help you find a productive solution to meet your needs.

Features:

  • Hardened steel, double sided slitting knives for long trouble-free service life.
  • Precision ground  Polished knives provides clean burr-free edges in all types of material.
  • Anodized aluminum construction stands up to the rigors of all job site weather conditions.
  • Easy to set up and use knives for slitting, rib forming, and optional perforators reposition in seconds.
  • Slitter knives are easy to configure and can be disassembled to add an optinal perforator die set or additionl knives to meet your changing needs.
  • Folding feed table with roller guides quickly adjusts to different widths of material.
  • We offer a range of optional motors in standard and heavy duty. Suitable for multiple slits, ribs, or perforating a wide range of materials. Also available in both 110v and 220v single phase for international voltages.
  • Brass tipped set screws - Soft brass tips ensure secure position of slitting knives without damage to knives and arbor shaft.
  • Optional perforating die set perforates steel, aluminum, zinc, and copper by producing a lanced perforation allowing 3.3 inch² of net free area, per running foot of metal.
  • Additional accessories such as extra knives for multiple slites, rib forming, perforators, capacity boosters, and booster blocks are available, sold seperately.

Note: accessories may be incompatible with older Van-Mark products.

Slitter Configuration

trim-slitter-configurations

trim-slitter-types

Core Specs
Model Length Arbor Weight
S14B 14 inch (35.5 cm) 1.5 inch 36 lbs (16.4 kg)
S24B 24 inch (61.0 cm) 1.5 inch 56 lbs (25.5 kg)
S24C 24 inch (61.0 cm) 2 inch 74 lbs (33.6 kg)
S36C 36 inch (91.4 cm) 2 inch 103 lbs (46.8 kg)
S48CB
Includes Booster Blocks (2 ea.)
48 inch (121.9 cm) 2 inch 131 lbs (59.5 kg)
 Material Maximum Thickness         
Aluminum (3003H14) .040 inch (1.0 mm) slitting, .032 inch (0.8 mm) perforating
Galvanized Steel 24 ga. (0.6 mm)
Painted Steel (Grade D) 24 ga. (0.6 mm)
Roofing Copper 24 oz.
Zinc .040 inch (1.0 mm)
Stainless Steel (304L) Please call for capacities
Capacities are based on standard metal properties for coil and sheet. Please contact our representitive for capacities on your specific material

 

All Van Mark Brakes, Tools and Accessories are
Manufactured AND Assembled in the USA!

Click Here to Download

Forget the need to use your time consuming snips, shears, or nibblers to cut down your metals. The Industrial Trim-A-Slitter Combo quickly and easily slits your master coils or sheets to the desired width, leaving a clean, burr free factory edge. Slitting knives adjust in seconds. The Industrial Trim-A-Slitter Combo is nearly turnkey ready to set up onsite or in your metal shop and can be disassembled for easy transport and storage in minutes.

Features:

  • Hardened steel, double sided slitting knives for long trouble-free service life.
  • Precision ground and Polished knives provides clean burr-free edges in all types of material.
  • Anodized aluminum construction stands up to the rigors of all job site weather conditions.
  • Easy to set up and use knives for slitting, rib forming, and optional perforators reposition in seconds.
  • Slitter knives are easy to configure and can be disassembled to add an optinal perforator die set or additionl knives to meet your changing needs.
  • Folding feed table with roller guides quickly adjusts to different widths of material.
  • The Built-In Tape Rule helps maintain slitter knife orientation with material.
  • Can be ordered with an optional heavy duty motor and also standard and heavy duty motors for 220volt operation.
  • Brass tipped set screws - Soft brass tips ensure secure position of slitting knives without damage to knives and arbor shaft.
  • The perforating die set perforates steel, aluminum, zinc, and copper by producing a lanced perforation allowing 3.3 inch of net free area, per running foot of metal.
  • Additional accessories such as extra knives for multiple slites, rib forming, perforators, capacity boosters, and booster blocks are available, sold seperately.

Note: accessories may be incompatible with older Van-Mark products.

Slitter Configuration

trim-slitter-configurations

trim-slitter-types

Core Specs
Model Length Arbor Weight
SCI48 48 inch (121.9 cm) (of Slitter) 2 inch 265 lbs (120.5 kg)
 Material Maximum Thickness         
Aluminum (3003H14) .040 inch (1.0 mm) slitting, .032 inch (0.8 mm) perforating
Galvanized Steel 24 ga. (0.6 mm)
Painted Steel (Grade D) 24 ga. (0.6 mm)
Roofing Copper 24 oz.
Zinc .040 inch (1.0 mm)
Stainless Steel (304L) Please call for capacities
Capacities are based on standard metal properties for coil and sheet. Please contact our representitive for capacities on your specific material

 

trim-a-slitter-perf-combo

All Van Mark Brakes, Tools and Accessories are
Manufactured AND Assembled in the USA!

Click Here to Download

The Trim-A-Slitter Perf Combo from Van Mark is designed to slit, stiffen or perforate your roofing steel, aluminum, zinc and copper. Perforate 24 gauge painted steel onsite! Reduce your material costs by producing your own perforated z-bar, ventilated soffit or ridge cap. Contact Van Mark today to find out how the Trim-A-Slitter 24 inch perforating combo will increase both your productivity and your profits.

Features:

  • Hardened steel, double sided slitting knives for long trouble-free service life.
  • Precision ground and Polished knives provides clean burr-free edges in all types of material.
  • Anodized aluminum construction stands up to the rigors of all job site weather conditions.
  • Easy to set up and use knives for slitting, rib forming, and optional perforators reposition in seconds.
  • Slitter knives are easy to configure and can be disassembled to add an optional perforator die set or additional knives to meet your changing needs.
  • Folding feed table with roller guides quickly adjusts to different widths of material.
  • The Built-In Tape Rule helps maintain slitter knife orientation with material.
  • Heavy Duty, High Torque 110v reversible motor comes complete with motor mounted on/off switch.
  • Brass tipped set screws - Soft brass tips ensure secure position of slitting knives without damage to knives and arbor shaft.
  • The perforating die set perforates steel, aluminum, zinc, and copper by producing a lanced perforation allowing 3.3 inch of net free area, per running foot of metal.
  • Optional foot pedal frees up an additional hand for handling of metal in and out of the slitter/perforator.
  • Additional accessories such as extra knives for multiple slites, rib forming, perforators, capacity boosters, and booster blocks are available, sold seperately.

Note: accessories may be incompatible with older Van-Mark products.

Slitter Configuration

trim-slitter-configurations

trim-slitter-types

Core Specs
Model Length Arbor Weight
SCI24HD 24 inch (61.0 cm) (of Slitter) 2 inch 188 lbs (85.5 kg)
 Material Maximum Thickness         
Aluminum (3003H14) .040 inch (1.0 mm) slitting, .032 inch (0.8 mm) perforating
Galvanized Steel 24 ga. (0.6 mm)
Painted Steel (Grade D) 24 ga. (0.6 mm)
Roofing Copper 24 oz.
Zinc .040 inch (1.0 mm)
Stainless Steel (304L) Please call for capacities
Capacities are based on standard metal properties for coil and sheet. Please contact our representitive for capacities on your specific material

 

  • Additional slitter knives may be added to any Trim-A-Slitter to increase productivity when slitting or ribforming.
  • Manual operation allows use of slitter without a power source. Optional motor available in regular and heavy duty models to help increase production.
  • 2 knives are required for each additional cut and 3 knives are required for each additional rib.
  • (please contact the factory for assistance on capacities when adding additional knives for slitting, ribforming, or perforating.)

 

Slitter Motor Kits
Motor No / USe  Motor
3521 Standard motor fits all slitter models. 115V, Single ph, 60 Hz, 32 Ft / Min
3522 For all slitters where 50 HZ is required. 230V, Single ph, 50 Hz, 26 Ft / Min
3535 Heavy-duty use for all slitters. Required when perforating steel. 115V, Single ph, 60 Hz, 35 Ft / Min
3533 Heavy-duty use for all slitters. Required when perforating steel. For all slitters where 50 HZ is required. 230V, Single ph, 50 Hz, 35 Ft / Min

 Note: All motor kits come complete with coupling and mounting hardware.

Slitter Add-Ons and Accessories
Part No / Name Uses Slitters / Arbor Sizes Packaged
5034 Slitter Knife 2 required (1 upper and 1 lower) per each additional cut. 3 required for each additional rib. All B model slitters with 1.5 inch arbors 1 each
5035
Slitter Knife
2 required (1 upper and 1 lower) per each additional cut.
3 required for each additional rib.
All C model slitters with 2 inch arbors 1 each
3007
Perforator Die Set
For perforating most light to medium construction grade materials. Provides 3.36 inches of net free area per foot running foot. All B model slitters with 1.5 inch arbors 1 Male
1 Female
3024A
Perforator Die Set
For perforating most light to medium construction grade materials. Provides 3.36 inches of net free area per running foot All C model slitters with 2 inch arbors 1 Male
1 Female
5119
Stripper
Installs with perforators to prevent materials from winding on rolls. All slitters and perforator sets 1 each
3578
Booster Block
(2) Recommended. Provides support under arbors to increase slitting capacity on 48 inch, 60 inch, and 72 inch slitters. All C model slitters with 2 inch arbor shafts 1 each
3582
Capacity Booster
Helps prevents arbors from spreading during slitting operation. Installs in conjunction with 1 set of slitting knives All C model slitters with 2 inch arbor shafts. 1 each

 

S14B
OBSOLETE - 14 TRIM-A-SLITTER
Mfg. item #: S14B
VANS14B
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

826
S24B
24 TRIM-A-SLITTER
Mfg. item #: S24B
VANS24B
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,079.75

109
S24C
24 TRIM-A-SLITTER
Mfg. item #: S24C
VANS24C
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,338.18

109
S36C
36 TRIM-A-SLITTER
Mfg. item #: S36C
VANS36C
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,663.87

109
S48CB
48 TRIM-A-SLITTER
Mfg. item #: S48CB
VANS48CB
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,230.30

109
SCI48
48 TRIM-A-SLITTER
Mfg. item #: SCI48
VANSCI48
lease to own for as little as:$81 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,071.17

109
SCI24HD
SCI24HD - TRIM-A-SLITTER
Mfg. item #: SCI24HD
VANSCI24HD
lease to own for as little as:$79 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,936.65

109
3521
3521 MOTOR 115V 50/ 60HZ
Mfg. item #: 3521
VAN3521
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,236.75

109
3522
MOTOR 230 VOLT
Mfg. item #: 3522
VAN3522
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,011.47

109
3535
3535 MOTOR 115VOLT HD
Mfg. item #: 3535
VAN3535
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,926.39

109
3533
SLITTER POWER PACKAGE - 3533 MOTOR
Mfg. item #: 3533
VAN3533
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,636.75

109
5034
5034 KNIVE B 1 1/2
Mfg. item #: 5034
VAN5034
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$130.00

109
5035
5035 KNIFE 2
Mfg. item #: 5035
VAN5035
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$130.00

109
3007
PERFORATOR ROLLERS B 1 1/2 I.D.
Mfg. item #: 3007
VAN3007
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$574.70

109
3024A
PERFORATOR ROLLERS C PACKAGE
Mfg. item #: 3024A
VAN3024A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$712.63

109
5119
PERFORATION STRIPPER FOR TRIM-A-SLI
Mfg. item #: 5119
VAN5119
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$80.00

109
3578
NO LONGER AVAILABLE - BOOSTER BLOCK, ALL SLITTER MODELS
Mfg. item #: 3578
VAN3578
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

3377
3582
CENTER BEARING BLOCKS - C 2 I.D.
Mfg. item #: 3582
VAN3582
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$195.00

109
Copyright © 2024 Smith-Hamilton, Inc
0.015 240109 11:04