|
Baileigh BB-4816 Box and Pan Brake
The BB-4816 Box and Pan Brake can accept 48" wide sheets of mild
steel with thicknesses of up to 16 gauge across the entire width of its apron.
The quality construction of this sheet metal bender includes a heavy counter
weight to assist with lifting the apron even when bending at full capacity. The
BB-4816 metal brake can bend with no deflection because the heavy duty truss rod
system is further supported by an all steel frame that is electro welded and the
bending fingers are hardened, which creates straight edges on the tightest of
bends. This finger brake has five 2", six 3" and five 4" fingers allowing the
operator to configure for most box and pan layouts. The BB-4816's fingers can be
configured to bend up to a 4" deep box or can act as a straight sheet metal
brake when all the fingers are in place. and can handle up to 16GA mild steel
When sheet metal forming is required, a Baileigh sheet metal
bender offers the tightest and straightest bends from a quality piece of
equipment that is affordable and will offer decades of operation. Baileigh's
sheet metal brakes are very strong, yet compact and all come standard with a
floor stand for ease of operation
|
