Hydraulic Ironworker SW-84
Made in Taiwan
The SW-84 hydraulic iron worker is a great way to step up to a dual operator ironworker. This machine puts out a little more tonnage on the punch station than the SW-62, a whopping 84 tons to be exact. But the shearing and notching station is where the SW-84 really begins to shine. These stations put out a whopping 110 tons of force, almost double what the largest single operator machine puts out. This really comes in handy when you have larger stock to shear. But the best part of the SW-84 is the increase you will see in productivity, it allows two operators on each end of the machine to work simultaneously without loss of power at either station.
The SW-84 has five work stations, these include punching, notching, flat bar shearing, angle shearing, and bar shearing. The SW-84 uses all vertical movement to perform functions at all five stations. The advantage to the vertical movement is less material waste due to less clearance being needed and punch tooling will last longer as the stress is spread out over the entire circumference of the punch instead of just one edge.
The fully welded frame on the SW-84 adds to the overall rigidity on the machine which makes it more accurate and will hold its tolerances better than other machines on the market. Other great features of the SW-84 are an electric back gauge, swing away stripper, oversized work tables, foot pedal operation, and waste buckets.
Optional tooling such as press brakes, pipe notchers, channel and I-beam shears, and others are available. Call your friendly Baileigh Representative for more details.
Resources Click on a link to download resources.
|Round Bar Shear||1.75 inch|
|Rectangle Notcher W x D x T||2 x 3.5 x .5 inch|
|Single Vee Press Brake L x T||9.875 x .625 inch|
|Punch Capacity||1.125 x .875 inch|
|Punching Pressure||84 Tons|
|Pipe Notching||2.5 inch|
|Multi Vee Press Brake L x T||19.625 x .187 inch|
|Notching Working Height||44 inch|
|Throat Depth||12.25 inch|
|Vee Notcher Side x Side x T||3.5 x 3.5 x .5 inch|
|Working Height||43.5 inch|
|Square Bar Shear||1.75 x 1.75 inch|
|Bar Shearing Working Height||48 inch|
|Angle Shearing Working Height||44 inch|
|Angle Shearing at 90 degree||5.125 x 5.125 x .5 inch|
|Angle Bending||4 x .312 inch|
|Angle Flange Trim||4 inch|
|Blade Length||16.125 inch|
|Large V Notcher Side x Side x T||5.57 x 5.57 x .375 inch|
|Max. Stroke Length||3 inch|
|Diameter x Thickness||2 x .5 inch|
|Cycles / Min.||38 at 15 mm|
|Flat Bar Shearing||15.75 x .625 inch|
|Flat Shearing Working Height||33.5 inch|
|Power||220V / 3-Phase|
|Shipping Weight||5,060 lbs.|
|Shipping Dimensions||60 x 36 x 78 inch|
* specifications subject to change without notice.
Optional tooling such as press brakes, pipe notchers, channel and I-beam shears, and others are available. Call your friendly Baileigh Representative for more
Add up all of the features included on the Baileigh Industrial SW-84 Ironworker and you will see - when it comes to precision, performance and perfection - Baileigh Industrial stands alone. For decades of profitability there is only one choice - Buy Baileigh!
|SW-84 & SW-95|
|SW-3221000||Triangular Notching Set for SW-84|
|SW-9021300||Large Vee Notcher Set for SW-84 / SW-95|
|SW-9023400||Single Vee Press Brake for SW-84 / SW-95|
|SW-9023590||Multi Vee Press Brake for SW-84 / SW-95|
|SW-3024400||Angle Bending Set for SW-84 / SW-95|
|SW-9025D-1"||1 inch OD Tube Notching Set for SW-84/95|
|SW-9025D-1.25"||1-1/4 inch OD Tube Notching Set for SW-84/95|
|SW-9025D-1.5"||1-1/2 inch OD Tube Notching Set for SW-84/95|
|SW-9025D-2"||2 inch OD Tube Notching Set for SW-84/95|
|SW-9025D-2.5"||2-1/2 inch OD Tube Notching Set for SW-84/95|
|SW-9025D-3"||3 inch OD Tube Notching Set for SW-84/95|
|SW-9025D-3.5"||3-1/2 inch OD Tube Notching Set for SW-84/95|
|SW-9025W-4"||4 inch OD Tube Notching Set for SW-84/95|
|SW-9025W-4.25"||4-1/4 inch OD Tube Notching Set for SW-84/95|
|SW-9025D-1.315"||1 inch Pipe (1.315 inch OD) Notching Set for SW-84/95|
|SW-9025D-1.660"||1-1/4 inch Pipe (1.66 inch OD) Notch Set for SW-84/95|
|SW-9025D-1.9"||1-1/2 inch Pipe (1.9 inch OD) Notch Set for SW-84/95|
|SW-9025D-2.375"||2 inch Pipe (2.375 inch OD) Notch Set for SW-84/95|
|SW-9025D-2.875"||2-1/2 inch Pipe (2.875 inch OD) Notch Set for SW-84/95|
220V 3PHASE DUAL OPERATOR 84 TON 5 STATION IRONWORKER
Mfg. item #: SW-84
lease to own for as little as:$552 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1