|
671/753 DIG-R-TACH SERIES HYDRAULIC ATTACHMENT HOLE DIGGERS
|
|
MODEL
|
DESCRIPTION
|
WEIGHT (LBS)
|
 671-16
|
Hole Digger, ow: Up to 25.0 GPM (94.6 lit/min); pressure range: 1500-3000 PSI. 1330 ft. lbs max drilling torque at 2500 PSI. 2 inch hexagon auger drive connection. Includes auger bolt.
|
|
|
753-16
|
Hole Digger, ow: Up to 25.0 GPM (94.6 lit/min); pressure range: 1500-3000 PSI. 1330 ft. lbs max drilling torque at 2500 PSI. 2.562 inch round auger drive connection. Includes auger pin.
|
|
671/753 DIG-R-TACH - MOUNTING FRAME
|
|
PART NUMBER
|
DESCRIPTION
|
WEIGHT (LBS)
|
COMPATIBLE PRODUCT
|
|
671-1100
|
Mounting frame for all skid loaders utilizing Bobcat type bucket attachment system.
|
222.0
|
All 671/753 Models
|
|
671 DIG-R-TACH - NON-FLIGHTED AUGER EXTENSIONS
|
|
PART NUMBER
|
FLIGHTING OD (IN)
|
CUTTING DIA (IN)
|
EFFECTIVE DIGGING DEPTH (IN)
|
HEX DRIVE CONNECTION (IN)
|
WEIGHT (LBS)
|
COMPATIBLE PRODUCT
|
|
6700-15X
|
|
|
15
|
|
23.5
|
671-16, 6710 Series Augers
|
|
6700-36X
|
36
|
36.5
|
|
753 DIG-R-TACH - NON-FLIGHTED AUGER EXTENSIONS
|
|
PART NUMBER
|
FLIGHTING OD (IN)
|
CUTTING DIA (IN)
|
EFFECTIVE DIGGING DEPTH (IN)
|
ROUND DRIVE CONNECTION (IN)
|
WEIGHT (LBS)
|
COMPATIBLE PRODUCT
|
|
6780-15X
|
|
|
15
|
|
25.3
|
All 553 Models, 4750 Series Augers
|
|
6780-36X
|
36
|
38.0
|
|
671/753 DIG-R-TACH - COUPLERS
|
|
PART NUMBER
|
DESCRIPTION
|
WEIGHT (LBS)
|
COMPATIBLE PRODUCT
|
|
6700-2CLR
|
Coupler adapts hydraulic powered attachments with 2.562 inch male round driveshaft and .875 inch diameter drive pin (General, Lowe, McMillen, Pengo, Bobcat, etc.) to augers with 2 inch
female hexagon drive hub.
|
17.8
|
753-16, 6750 Series Augers
|
|
6700-4CLR
|
Coupler adapts hydraulic attachments with 2 inch male hexagon driveshaft to augers with 2.562 inch female round drive hub (General, Lowe, McMillen, Pengo, Bobcat, etc.) and .875 inch
diameter drive pin.
|
19.7
|
671-16, 6710 Series Augers
|
|
671/753 DIG-R-TACH - AUGER TEETH
|
|
PART NUMBER
|
DESCRIPTION
|
|
COMPATIBLE PRODUCT
|
|
35PAK7
|
Standard dirt tooth, thin cross section for fast penetration, wears sharp. For ordinary digging conditions. Can install in all boring head sockets. Includes RUB-R-LOKTM. Pack of 7.
|
0.4
|
|
|
35HFCPAK7
|
Hard-faced dirt tooth for substantially increased wear life over standard dirt tooth. For ordinary digging conditions. Can install in all boring head sockets with hardfacing up. Includes
RUB-R-LOKTM. Pack of 7.
|
|
|
5T30PAK3
|
Chisel dirt tooth. Rips through caliche, hardpan and other formations. For install in inside, boring head sockets only, rib side facing up. Not for use alone w/6 inch diameter auger.
Includes RUB-R-LOKTM. Pack of 3.
|
|
|
5T30CPAK3
|
Chisel dirt tooth w/Tungsten Carbide overlay. Rips through caliche, hardpan and other formations. For install in inside, boring head sockets only, rib side facing up. Not for use alone w/6
inch diameter auger. Includes RUB-R-LOKTM. Pack of 3.
|
|
|
1336PAK2
|
Tungsten Carbide tooth. For use in extremely abrasive and frozen soil. Extended wear life over standard dirt tooth. Can install in all boring head sockets. Use in rocky soils may shatter
inserts. Includes RUB-R-LOKTM. Pack of 2.
|
|
|
671/753 DIG-R-TACH - AUGER SCREW BITS
|
|
PART NUMBER
|
DESCRIPTION
|
WEIGHT (LBS)
|
COMPATIBLE PRODUCT
|
|
SB35
|
Auger screw bit. Includes mounting bolt and nut. Pack of 1.
|
1.9
|
|
|
SB35C
|
Auger screw bit w/Tungsten Carbide overlay for increased wear life. Includes mounting bolt and nut. Pack of 1.
|
1.9
|
|
671 DIG-R-TACH - NON-FLIGHTED AUGER EXTENSIONS
|
|
PART NUMBER
|
FLIGHTING OD (IN)
|
CUTTING DIA (IN)
|
EFFECTIVE DIGGING DEPTH (IN)
|
HEX DRIVE CONNECTION (IN)
|
WEIGHT (LBS)
|
COMPATIBLE PRODUCT
|
|
6700-15X
|
|
|
15
|
|
23.5
|
671-16, 6710 Series Augers
|
|
6700-36X
|
36
|
36.5
|
|
753 DIG-R-TACH - NON-FLIGHTED AUGER EXTENSIONS
|
|
PART NUMBER
|
FLIGHTING OD (IN)
|
CUTTING DIA (IN)
|
EFFECTIVE DIGGING DEPTH (IN)
|
ROUND DRIVE CONNECTION (IN)
|
WEIGHT (LBS)
|
COMPATIBLE PRODUCT
|
|
6780-15X
|
|
|
15
|
|
25.3
|
753-16,
All TCT 256RD Series Augers
|
|
6780-36X
|
36
|
38.0
|
|
671/753 DIG-R-TACH - COUPLERS
|
|
PART NUMBER
|
DESCRIPTION
|
WEIGHT (LBS)
|
COMPATIBLE PRODUCT
|
|
6700-2CLR
|
Coupler adapts hydraulic powered attachments with 2.562 inch male round driveshaft and .875 inch diameter drive pin (General, Lowe, McMillen, Pengo, Bobcat, etc.) to augers with 2 inch
female hexagon drive hub.
|
17.8
|
753-16, 6750 and TCT Series Augers
|
|
6700-4CLR
|
Coupler adapts hydraulic attachments with 2 inch male hexagon driveshaft to augers with 2.562 inch female round drive hub (General, Lowe, McMillen, Pengo, Bobcat, etc.) and .875 inch
diameter drive pin.
|
|
671-16, 6710 & TCT Series Augers
|
Download PDF File
671 and 753 DIG-R-TACH Models Literature
M671-16 DIG-R-TACH HYDRAULIC HOLE DIGGER ATTACHMENT
The M671-16 used most often with skid steer loaders. Single speed roller chain reduction, high torque geroler type hydraulic motor. Stub length connection hoses. Less
hydraulic quick couplers, hose kit, auger and mounting bracket/frame to power source.
Specifications:
AUGER
Drive shaft Connection: 2 inch (51mm) Hexagon
Diameter: 6" (mm) to 36" (mm)
Extension: Flighted and Non-flighted plain tube, depth to 45" (1143mm)
Maximum Drilling Torque: 665 (Low Speed) or 1330 (High Speed) ft. lbs.
Hydraulic System
Configuration: Open Type
System Flow: 5-20 GPM (19-76 lit/min) at 1500 -2500 PSI
Download PDF File
671 and 753 DIG-R-TACH Models Literature
671- and 753 Series Hydraulic Hole Digger (DIG-R-TACH) Operator Manual
M671-24 DIG-R-TACH HYDRAULIC HOLE DIGGER ATTACHMENT
The M671-24 used most often with tractor loader backhoes. Single speed roller chain reduction, high torque geroler type hydraulic motor with integral dual cross over
relief valve to minimize internal damage from excessive pressure spikes. Stub length connecting hoses. Less hydraulic quick couplers, hose kit, auger and mounting bracket/frame to power
source.
Specifications:
AUGER
Drive shaft Connection: 2 inch (51mm) Hexagon
Diameter: 6" (mm) to 36" (mm)
Extension: Flighted and Non-flighted plain tube, depth to 45" (1143mm)
Maximum Drilling Torque: 2018 ft. lbs.
Hydraulic System
Configuration: Open Type
System Flow: 15-25 GPM (19-76 lit/min) at 1500 -2500 PSI
Download PDF File
671 and 753 DIG-R-TACH Models Literature
671- and 753 Series Hydraulic Hole Digger (DIG-R-TACH) Operator
Manual
M753-16 DIG-R-TACH HYDRAULIC HOLE DIGGER ATTACHMENT
The M753-16 and used most often with skid steer loaders. Single speed roller chain reduction, high torque geroler type hydraulic motor. Stub length connection hoses.
Less hydraulic quick couplers, hose kit, auger and mounting bracket/frame to power source.
Specifications:
AUGER
Drive shaft Connection: 2-9/16 inch (mm) round
Diameter: 6" (mm) to 36" (mm)
Extension: Flighted and Non-flighted plain tube, depth to 45" (1143mm)
Maximum Drilling Torque: 665 (Low Speed) or 1330 (High Speed) ft. lbs.
Hydraulic System
Configuration: Open Type
System Flow: 5-20 GPM (19-76 lit/min) at 1500 -2500 PSI
Download PDF File
671 and 753 DIG-R-TACH Models Literature
671- and 753 Series Hydraulic Hole Digger (DIG-R-TACH) Operator
Manual
M753-24 DIG-R-TACH HYDRAULIC HOLE DIGGER ATTACHMENT
The M671-24 and M753-24 are used most often with tractor loader backhoes. Single speed roller chain reduction, high torque geroler type hydraulic motor with integral
dual cross over relief valve to minimize internal damage from excessive pressure spikes. Stub length connecting hoses. Less hydraulic quick couplers, hose kit, auger and mounting bracket/frame to
power source.
Specifications:
AUGER
Drive shaft Connection: 2-9/16 inch (mm) round
Diameter: 4" (102mm) to 24" (610mm)
Extension: Flighted and Non-flighted plain tube, depth to 45" (1143mm)
Maximum Drilling Torque: 2018 ft. lbs.
Hydraulic System
Configuration: Open Type
System Flow: 15-25 GPM (57-95 lit/min) at 1500 -3000 PSI
6710 Series Augers - Drive connections: 2 inch hexagon
Available in 4 foot and 5 foot effective digging depths. Each equipped with a 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the
auger axle. 6710 Series auger utilize a Pengo TYPE LDOBH cast steel boring heads. For use with either the M671-16 or M671-24 Series DIG-R-TACH and competitive models of popular hydraulic power
earth drilling attachments utilizing a 2 inch hexagon auger drive connection.
CLICK ON PART NUMBER BELOW FOR COST OR SCROLL DOWN TO BOTTOM OF THE PAGE
|
Part No.
|
Flighting OD
|
Cutting Dia
|
Digging Depth
|
Weight
|
|
6710-6PE4
|
6 inch
|
7-1/2 inch
|
4 feet
|
70 lbs
|
|
6710-6PE5
|
6 inch
|
7-1/2 inch
|
5 feet
|
85 lbs
|
|
6710-9PE4
|
8 inch
|
9-1/2 inch
|
4 feet
|
80 lbs
|
|
6710-6PE5
|
8 inch
|
9-1/2 inch
|
5 feet
|
95 lbs
|
|
6710-12PE4
|
12 inch
|
13-1/2 inch
|
4 feet
|
108 lbs
|
|
6710-12PE5
|
12 inch
|
13-1/2 inch
|
5 feet
|
130 lbs
|
|
6710-16PE4
|
16 inch
|
17-1/2 inch
|
4 feet
|
130 lbs
|
|
6710-16PE5
|
16 inch
|
17-1/2 inch
|
5 feet
|
160 lbs
|
|
6710-18PE4
|
18 inch
|
19-1/2 inch
|
4 feet
|
140 lbs
|
|
6710-18PE5
|
18 inch
|
19-1/2 inch
|
5 feet
|
170 lbs
|
|
6710-24PE4
|
24 inch
|
25-1/2 inch
|
4 feet
|
250 lbs
|
|
6710-24PE5
|
24 inch
|
25-1/2 inch
|
5 feet
|
280 lbs
|
|
6710-30PE4
|
30 inch
|
31-1/2 inch
|
4 feet
|
313 lbs
|
|
6710-30PE5
|
30 inch
|
31-1/2 inch
|
5 feet
|
350 lbs
|
|
6710-36PE4
|
36 inch
|
37-1/2 inch
|
4 feet
|
375 lbs
|
|
6710-36PE5
|
36 inch
|
37-1/2 inch
|
5 feet
|
420 lbs
|
Click Here for TCT "Extra Heavy Duty" Auger Bits 6" to 24"
diameter x 36" to 60" Depth
6750 Series Augers - Drive connection: 2-9/16 inch round
Available in 4 foot and 5 foot effective digging depths. Each equipped with a 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the auger axle. 6750 Series auger
utilize a Pengo TYPE LDOBH cast steel boring heads. For use with either the M753-16 and M753-24 Series DIG-R-TACH and competitive models of popular hydraulic power earth drilling attachments
utilizing a 2-9/16 inch round auger drive connection.
CLICK ON PART NUMBER BELOW FOR COST OR SCROLL DOWN TO BOTTOM OF THE PAGE
|
|
|
Part No.
|
Flighting OD
|
Cutting Dia
|
Digging Depth
|
Weight
|
|
6750-6PE4
|
6 inch
|
7-1/2 inch
|
4 feet
|
70 lbs
|
|
6750-6PE5
|
6 inch
|
7-1/2 inch
|
5 feet
|
85 lbs
|
|
6750-9PE4
|
8 inch
|
9-1/2 inch
|
4 feet
|
80 lbs
|
|
6750-6PE5
|
8 inch
|
9-1/2 inch
|
5 feet
|
95 lbs
|
|
6750-12PE4
|
12 inch
|
13-1/2 inch
|
4 feet
|
108 lbs
|
|
6750-12PE5
|
12 inch
|
13-1/2 inch
|
5 feet
|
130 lbs
|
|
6750-16PE4
|
16 inch
|
17-1/2 inch
|
4 feet
|
130 lbs
|
|
6750-16PE5
|
16 inch
|
17-1/2 inch
|
5 feet
|
160 lbs
|
|
6750-18PE4
|
18 inch
|
19-1/2 inch
|
4 feet
|
140 lbs
|
|
6750-18PE5
|
18 inch
|
19-1/2 inch
|
5 feet
|
170 lbs
|
|
6750-24PE4
|
24 inch
|
25-1/2 inch
|
4 feet
|
250 lbs
|
|
6750-24PE5
|
24 inch
|
25-1/2 inch
|
5 feet
|
280 lbs
|
|
6750-30PE4
|
30 inch
|
31-1/2 inch
|
4 feet
|
313 lbs
|
|
6750-30PE5
|
30 inch
|
31-1/2 inch
|
5 feet
|
350 lbs
|
|
6750-36PE4
|
36 inch
|
37-1/2 inch
|
4 feet
|
375 lbs
|
|
6750-36PE5
|
36 inch
|
37-1/2 inch
|
5 feet
|
420 lbs
|
|
|
Click Here for TCT "Extra Heavy Duty" Auger Bits 6" to 24" diameter x 36" to 60" Depth
6700 Series Augers Extensions - Drive connection: 2 inch hexagon
Available in 4 foot and 5 foot effective digging depths. Each equipped with a 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the
auger axle. 6710 Series auger utilize a Pengo® TYPE LDOBH cast steel boring heads. For use with either the M471-12, M471-20, M671-16 and M671-24 Series DIG-R-TACH and competitive models of popular
hydraulic power earth drilling attachments utilizing a 2 inch hexagon auger drive connection.
CLICK ON PART NUMBER BELOW FOR COST OR SCROLL DOWN TO BOTTOM OF THE PAGE
|
Part No.
|
Flighting OD
|
Cutting Dia
|
Digging Depth
|
Weight
|
|
6700-6X4
|
6 inch
|
N/A
|
4 feet
|
60 lbs
|
|
6700-6X5
|
6 inch
|
N/A
|
5 feet
|
75 lbs
|
|
6700-9X4
|
8 inch
|
N/A
|
4 feet
|
65 lbs
|
|
6700-9X5
|
8 inch
|
N/A
|
5 feet
|
80 lbs
|
|
6700-12X4
|
12 inch
|
N/A
|
4 feet
|
91 lbs
|
|
6700-12X5
|
12 inch
|
N/A
|
5 feet
|
113 lbs
|
|
6700-16X4
|
16 inch
|
N/A
|
4 feet
|
109 lbs
|
|
6700-16X5
|
16 inch
|
N/A
|
5 feet
|
136 lbs
|
|
6700-18X4
|
18 inch
|
N/A
|
4 feet
|
118 lbs
|
|
6700-18X5
|
18 inch
|
N/A
|
5 feet
|
148 lbs
|
|
6700-24X4
|
24 inch
|
N/A
|
4 feet
|
221 lbs
|
|
6700-24X5
|
24 inch
|
N/A
|
5 feet
|
251 lbs
|
|
6700-30X4
|
30 inch
|
N/A
|
4 feet
|
276 lbs
|
|
6700-30X5
|
30 inch
|
N/A
|
5 feet
|
313 lbs
|
|
6700-36X4
|
36 inch
|
N/A
|
4 feet
|
330 lbs
|
|
6700-36X5
|
36 inch
|
N/A
|
5 feet
|
375 lbs
|
|
6700 Series Auger Extensions (No Flighting)
|
|
Part No.
|
Flighting OD
|
Cutting Dia
|
Digging Depth
|
Weight
|
|
6700-15X
|
No Flighting
|
N/A
|
15 inches
|
23 lbs
|
|
6700-36X
|
No Flighting
|
N/A
|
36 inch
|
34 lbs
|
6780 Series Auger Extensions - Drive connection: 2-9/16 inch round
Available in 4 foot and 5 foot effective digging depths. Each equipped with a 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the auger axle. 6750 Series auger
utilize a Pengo TYPE LDOBH cast steel boring heads. For use with either the M753-16 and M753-24 Series DIG-R-TACH and competitive models of popular hydraulic power earth drilling attachments
utilizing a 2-9/16 inch round auger drive connection.
CLICK ON PART NUMBER BELOW FOR COST OR SCROLL DOWN TO BOTTOM OF THE PAGE
|
|
|
Part No.
|
Flighting OD
|
Cutting Dia
|
Digging Depth
|
Weight
|
|
6780-6X4
|
6 inch
|
N/A
|
4 feet
|
60 lbs
|
|
6780-6X5
|
6 inch
|
N/A
|
5 feet
|
75 lbs
|
|
6780-9X4
|
8 inch
|
N/A
|
4 feet
|
65 lbs
|
|
6780-9X5
|
8 inch
|
N/A
|
5 feet
|
80 lbs
|
|
6780-12X4
|
12 inch
|
N/A
|
4 feet
|
91 lbs
|
|
6780-12X5
|
12 inch
|
N/A
|
5 feet
|
113 lbs
|
|
6780-16X4
|
16 inch
|
N/A
|
4 feet
|
109 lbs
|
|
6780-16X5
|
16 inch
|
N/A
|
5 feet
|
136 lbs
|
|
6780-18X4
|
18 inch
|
N/A
|
4 feet
|
118 lbs
|
|
6780-18X5
|
18 inch
|
N/A
|
5 feet
|
148 lbs
|
|
6780-24X4
|
24 inch
|
N/A
|
4 feet
|
221 lbs
|
|
6780-24X5
|
24 inch
|
N/A
|
5 feet
|
251 lbs
|
|
6780-30X4
|
30 inch
|
N/A
|
4 feet
|
276 lbs
|
|
6780-30X5
|
30 inch
|
N/A
|
5 feet
|
313 lbs
|
|
6780-36X4
|
36 inch
|
N/A
|
4 feet
|
330 lbs
|
|
6780-36X5
|
36 inch
|
N/A
|
5 feet
|
375 lbs
|
|
|
|
|
|
CLICK ON PART NUMBER BELOW FOR COST OR SCROLL DOWN TO BOTTOM OF THE PAGE
|
Couplers for use with 671/751 DIG-R-TACH
|
|
|
Part No.
|
Description
|
Weight
|
|
|
6700-2CLR
|
Adapts 6710 Series auger with 2 inch hexagon auger connection to Lowe and General 753 Series DIG-R-TACH® earth auger attachments with 2-9/16 inch
round auger connection (3/4 inch diameter pin).
|
20 lbs
|
|
6700-3CLR
|
Adapts 6710 Series auger with 2 inch hexagon auger connection to Danuser earth auger attachments with 2-9/16 inch round auger connection (1/2 inch diameter pin).
|
20 lbs
|
|
|
6700-4CLR
|
Adapts Lowe earth auger with 2-9/16 inch round auger connection to Series 671 DIG-R-TACH® with 2 inch hexagon auger connection (3/4 inch diameter pin).
|
20 lbs
|
|
6700-5CLR
|
Adapts Danuser earth auger with 2-9/16 inch diameter round auger connection to Series 671 DIG-R-TACH® with 2 inch hexagon auger connection (1/2 inch diameter pin).
|
20 lbs
|
|
REPLACEMENT AUGERSCREW BITS
|
|
|
Part No.
|
|
Description
|
|
Application
|
|
|
|
|
3â€Âù (only) Auger Diamater
|
|
2135-3E Augers
|
|
P801
Screw Bit
|
|
All except 3â€Âù Auger Diamater
|
|
2135 Series Augers, except 2135-3E
|
|
|
|
|
Use in most soils. Thin cross section for fast penetration. Install in all Pengo type ngers except 3 and 4 inch iameters.
|
|
4400, BT360 and PSD Series Earth Augers equipped with a Pengo type boring head.
|
|
SB25C
Screw Bit
|
|
Also available with Tungsten
Carbide overlay to increase
wear life.
|
|
4400, BT360 and PSD Series Earth Augers equipped with a Pengo type boring head.
|
|
|
|
|
Use in most soils. Thin cross
section for fast penetration.
|
|
4400-3E3, 5500-3E5 augers, and
4710, 4750, 6710, 6750, Series
EarthAugers.
|
|
|
|
Also available with Tungsten
Carbide overlay to increase
wear life.
|
|
4400-3E3, 5500-3E5 augers, and
4710, 4750, 6710, 6750, Series
EarthAugers.
|
|
|
|
|
Use in most soils. Thin cross
section for fast penetration
|
|
4400-4E3, 5500-4E3, 4410-4E3,
5510-4E3
|
CLICK ON PART NUMBER BELOW FOR COST OR SCROLL DOWN TO BOTTOM OF THE PAGE
|
Couplers for use with 671/751 DIG-R-TACH
|
|
|
Part No.
|
Description
|
Weight
|
|
|
6700-2CLR
|
Adapts 6710 Series auger with 2 inch hexagon auger connection to Lowe and General 753 Series DIG-R-TACH® earth auger attachments with 2-9/16 inch
round auger connection (3/4 inch diameter pin).
|
20 lbs
|
|
6700-3CLR
|
Adapts 6710 Series auger with 2 inch hexagon auger connection to Danuser earth auger attachments with 2-9/16 inch round auger connection (1/2 inch diameter pin).
|
20 lbs
|
|
|
6700-4CLR
|
Adapts Lowe earth auger with 2-9/16 inch round auger connection to Series 671 DIG-R-TACH® with 2 inch hexagon auger connection (3/4 inch diameter pin).
|
20 lbs
|
|
6700-5CLR
|
Adapts Danuser earth auger with 2-9/16 inch diameter round auger connection to Series 671 DIG-R-TACH® with 2 inch hexagon auger connection (1/2 inch diameter pin).
|
20 lbs
|
|
|
Part No.
|
|
Description
|
|
Application
|
|
|
|
|
3” (only) Auger Diamater
|
|
2135-3E Augers
|
|
|
P801
Screw Bit
|
|
All except 3” Auger Diamater
|
|
2135 Series Augers, except 2135-3E
|
|
|
|
|
Use in most soils. Thin cross section for fast penetration. Install in all Pengo type ngers except 3 and 4 inch iameters.
|
|
4400, BT360 and PSD Series Earth Augers equipped with a Pengo type boring head.
|
|
SB25C
Screw Bit
|
|
Also available with Tungsten
Carbide overlay to increase
wear life.
|
|
4400, BT360 and PSD Series Earth Augers equipped with a Pengo type boring head.
|
|
|
|
|
Use in most soils. Thin cross
section for fast penetration.
|
|
4400-3E3, 5500-3E5 augers, and
4710, 4750, 6710, 6750, Series
EarthAugers.
|
|
|
|
Also available with Tungsten
Carbide overlay to increase
wear life.
|
|
4400-3E3, 5500-3E5 augers, and
4710, 4750, 6710, 6750, Series
EarthAugers.
|
|
|
|
|
Use in most soils. Thin cross
section for fast penetration
|
|
4400-4E3, 5500-4E3, 4410-4E3,
5510-4E3
|
