![]() |
Skid Loader & Diperstick Mounting |
Backhoe Brand, model & dipperstick width and pin diameter dimensions required to complete set up
MOUNTING FRAMES REQUIRED TO OPERATE M671 & M753 AUGER ATTACHMANTS | |
---|---|
671-1100 | Skid Loader Mounting Frame for use with all skid loaders |
671-3000 | Dipperstick Mounting Brackets - 1 inch diameter dippersticks pins |
671-3100 | Dipperstick Mounting Brackets - 1-1/2 inch diameter dippersticks pins |
671-3200 | Dipperstick Mounting Brackets - 1-3/4 inch diameter dippersticks pins |
671-3300 | Dipperstick Mounting Brackets - 2 inch diameter dippersticks pins |
671-3400 | Dipperstick Mounting Brackets - 2-1/2 inch diameter dippersticks pins |
M671-16 DIG-R-TACH HYDRAULIC HOLE DIGGER ATTACHMENT
The M671-16 used most often with skid steer loaders. Single speed roller chain reduction, high torque geroler type hydraulic motor. Stub length connection hoses. Less hydraulic quick couplers, hose kit, auger and mounting bracket/frame to power source.
Specifications:
AUGER
Drive shaft Connection: 2 inch (51mm) Hexagon
Diameter: 6" (mm) to 36" (mm)
Extension: Flighted and Non-flighted plain tube, depth to 45" (1143mm)
Maximum Drilling Torque: 665 (Low Speed) or 1330 (High Speed) ft. lbs.
Hydraulic System
Configuration: Open Type
System Flow: 5-20 GPM (19-76 lit/min) at 1500 -2500 PSI
Download PDF File for M671-16
671 and 753 DIG-R-TACH Models Literature
M671-24 DIG-R-TACH HYDRAULIC HOLE DIGGER ATTACHMENT
The M671-24 used most often with tractor loader backhoes. Single speed roller chain reduction, high torque geroler type hydraulic motor with integral dual cross over relief valve to minimize internal damage from excessive pressure spikes. Stub length connecting hoses. Less hydraulic quick couplers, hose kit, auger and mounting bracket/frame to power source.
Specifications:
AUGER
Drive shaft Connection: 2 inch (51mm) Hexagon
Diameter: 6" (mm) to 36" (mm)
Extension: Flighted and Non-flighted plain tube, depth to 45" (1143mm)
Maximum Drilling Torque: 2018 ft. lbs.
Hydraulic System
Configuration: Open Type
System Flow: 15-25 GPM (19-76 lit/min) at 1500 -2500 PSI
Download PDF File for M671-24
6710 Series Augers - Drive connections: 2 inch hexagon
Available in 4 foot and 5 foot effective digging depths. Each equipped with a 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the auger axle. 6710 Series auger utilize a Pengo TYPE LDOBH cast steel boring heads. For use with either the M671-16 or M671-24 Series DIG-R-TACH and competitive models of popular hydraulic power earth drilling attachments utilizing a 2 inch hexagon auger drive connection.
CLICK ON PART NUMBER BELOW FOR COST OR SCROLL DOWN TO BOTTOM OF THE PAGE
Part No. |
Flighting OD
|
Cutting Dia
|
Digging Depth
|
Weight
|
---|---|---|---|---|
6710-6PE4 |
6 inch
|
7-1/2 inch
|
4 feet
|
70 lbs
|
6710-6PE5 |
6 inch
|
7-1/2 inch
|
5 feet
|
85 lbs
|
6710-9PE4 |
8 inch
|
9-1/2 inch
|
4 feet
|
80 lbs
|
6710-6PE5 |
8 inch
|
9-1/2 inch
|
5 feet
|
95 lbs
|
6710-12PE4 |
12 inch
|
13-1/2 inch
|
4 feet
|
108 lbs
|
6710-12PE5 |
12 inch
|
13-1/2 inch
|
5 feet
|
130 lbs
|
6710-16PE4 |
16 inch
|
17-1/2 inch
|
4 feet
|
130 lbs
|
6710-16PE5 |
16 inch
|
17-1/2 inch
|
5 feet
|
160 lbs
|
6710-18PE4 |
18 inch
|
19-1/2 inch
|
4 feet
|
140 lbs
|
6710-18PE5 |
18 inch
|
19-1/2 inch
|
5 feet
|
170 lbs
|
6710-24PE4 |
24 inch
|
25-1/2 inch
|
4 feet
|
250 lbs
|
6710-24PE5 |
24 inch
|
25-1/2 inch
|
5 feet
|
280 lbs
|
6710-30PE4 |
30 inch
|
31-1/2 inch
|
4 feet
|
313 lbs
|
6710-30PE5 |
30 inch
|
31-1/2 inch
|
5 feet
|
350 lbs
|
6710-36PE4 |
36 inch
|
37-1/2 inch
|
4 feet
|
375 lbs
|
6710-36PE5 |
36 inch
|
37-1/2 inch
|
5 feet
|
420 lbs
|
Click Here for TCT "Extra Heavy Duty" Auger Bits 6" to 24" diameter x 36" to 60" Depth
6700 Series Augers Extensions - Drive connection: 2 inch hexagon
Available in 4 foot and 5 foot effective digging depths. Each equipped with a 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the auger axle. 6710 Series auger utilize a Pengo® TYPE LDOBH cast steel boring heads. For use with either the M471-12, M471-20, M671-16 and M671-24 Series DIG-R-TACH and competitive models of popular hydraulic power earth drilling attachments utilizing a 2 inch hexagon auger drive connection.
CLICK ON PART NUMBER BELOW FOR COST OR SCROLL DOWN TO BOTTOM OF THE PAGE
Part No. |
Flighting OD
|
Cutting Dia
|
Digging Depth
|
Weight
|
---|---|---|---|---|
6700-6X4 |
6 inch
|
N/A
|
4 feet
|
60 lbs
|
6700-6X5 |
6 inch
|
N/A
|
5 feet
|
75 lbs
|
6700-9X4 |
8 inch
|
N/A
|
4 feet
|
65 lbs
|
6700-9X5 |
8 inch
|
N/A
|
5 feet
|
80 lbs
|
6700-12X4 |
12 inch
|
N/A
|
4 feet
|
91 lbs
|
6700-12X5 |
12 inch
|
N/A
|
5 feet
|
113 lbs
|
6700-16X4 |
16 inch
|
N/A
|
4 feet
|
109 lbs
|
6700-16X5 |
16 inch
|
N/A
|
5 feet
|
136 lbs
|
6700-18X4 |
18 inch
|
N/A
|
4 feet
|
118 lbs
|
6700-18X5 |
18 inch
|
N/A
|
5 feet
|
148 lbs
|
6700-24X4 |
24 inch
|
N/A
|
4 feet
|
221 lbs
|
6700-24X5 |
24 inch
|
N/A
|
5 feet
|
251 lbs
|
6700-30X4 |
30 inch
|
N/A
|
4 feet
|
276 lbs
|
6700-30X5 |
30 inch
|
N/A
|
5 feet
|
313 lbs
|
6700-36X4 |
36 inch
|
N/A
|
4 feet
|
330 lbs
|
6700-36X5 |
36 inch
|
N/A
|
5 feet
|
375 lbs
|
6700 Series Auger Extensions (No Flighting) |
Part No. |
Flighting OD
|
Cutting Dia
|
Digging Depth
|
Weight
|
---|---|---|---|---|
6700-15X |
No Flighting
|
N/A
|
15 inches
|
23 lbs
|
6700-36X |
No Flighting
|
N/A
|
36 inch
|
34 lbs
|
CLICK ON PART NUMBER BELOW FOR COST OR SCROLL DOWN TO BOTTOM OF THE PAGE
Couplers for use with 671/751 DIG-R-TACH | |||
---|---|---|---|
|
Part No.
|
Description
|
Weight
|
![]() |
6700-2CLR |
Adapts 6710 Series auger with 2 inch hexagon auger connection to Lowe and General 753 Series DIG-R-TACHî earth auger attachments with 2-9/16 inch round auger connection (3/4 inch diameter pin). |
20 lbs
|
6700-3CLR | Adapts 6710 Series auger with 2 inch hexagon auger connection to Danuser earth auger attachments with 2-9/16 inch round auger connection (1/2 inch diameter pin). |
20 lbs
|
|
![]() |
6700-4CLR | Adapts Lowe earth auger with 2-9/16 inch round auger connection to Series 671 DIG-R-TACHî with 2 inch hexagon auger connection (3/4 inch diameter pin). |
20 lbs
|
6700-5CLR | Adapts Danuser earth auger with 2-9/16 inch diameter round auger connection to Series 671 DIG-R-TACHî with 2 inch hexagon auger connection (1/2 inch diameter pin). |
20 lbs
|
REPLACEMENT AUGERSCREW BITS | |||||
---|---|---|---|---|---|
|
Part No.
|
|
Description
|
|
Application
|
![]() |
Screw Bit |
3ââ¬Ãù (only) Auger Diamater
|
2135-3E Augers | ||
![]() |
Screw Bit |
All except 3ââ¬Ãù Auger Diamater
|
2135 Series Augers, except 2135-3E | ||
![]() |
Screw Bit |
Use in most soils. Thin cross section for fast penetration. Install in all Pengo type ngers except 3 and 4 inch iameters. | 4400, BT360 and PSD Series Earth Augers equipped with a Pengo type boring head. | ||
Screw Bit |
Also available with Tungsten Carbide overlay to increase wear life. |
4400, BT360 and PSD Series Earth Augers equipped with a Pengo type boring head. | |||
![]() |
Screw Bit |
Use in most soils. Thin cross section for fast penetration. |
4400-3E3, 5500-3E5 augers, and 4710, 4750, 6710, 6750, Series EarthAugers. |
||
Screw Bit |
Also available with Tungsten Carbide overlay to increase wear life. |
4400-3E3, 5500-3E5 augers, and 4710, 4750, 6710, 6750, Series EarthAugers. |
|||
![]() |
Screw Bit |
Use in most soils. Thin cross section for fast penetration |
4400-4E3, 5500-4E3, 4410-4E3, 5510-4E3 |