chat now with southern tool
Technical Sales 1–800–458–3687

General Equipment SG24/E Electric Dual H

SG24-E.jpg

SG24/E Electric Dual Head Surface Grinders

 

SG24/E ELECTRIC DUAL HEAD SURFACE GRINDERS

  • Power Source: 2 hp, 115/230 VAC, 60Hz electric motor
  • Maximum Grinding Width: 24 inches
  • Centralized lubrication system
  • 250 RPM disc rotation speed
  • Voltage switchable

SG24/E3HP60 ELECTRIC DUAL HEAD SURFACE GRINDERS

  • Power Source: 3 hp, 230 VAC, 60Hz electric motor
  • Maximum Grinding Width: 24 inches
  • Centralized lubrication system
  • 250 RPM disc rotation speed

SG24/E3HP50 ELECTRIC DUAL HEAD SURFACE GRINDERS

(Export)

  • Power Source: 3 hp, 220 VAC, 50Hz electric motor
  • Maximum Grinding Width: 24 inches
  • Centralized lubrication system
  • 250 RPM disc rotation speed

Includes low-speed single and dual head and high speed diamond disc type units. Choose from electric, propane and gasoline power sources. Grind, strip floor coatings or polish. Select the machine along with a widest variety of job specific attachments and accessories for the job application. Attachments all feature complete interchangeability with those found with popular brands of competitive units.

Download Literature (PDF) file

SG24 Series Dual Head Surface Grinders Operator Manual

SCRAPE-R-TACH Coating Removal System

SG24-2300 DIMA-A-TACH

SG24/E ELECTRIC DUAL HEAD SURFACE GRINDERS

Specifications:


POWER SOURCE
Type: Lesson, single phase, 115/230 VAC, 60 Hz
RPM: 3450
Horse Power: 2HP (1492w)

FRAME
Structure: Unitized, welded steel plate
Bearings: High capacity, Zerk® type fittings
Drive System: Dual B Series, V-belt/pully and spur gear reduction
Multi-Accessory Disc: Two each, aluminum, counter- rotating
Disc Rotation Speed: 250 RPM

General
Width: 27-1/2 inch (699 mm)
Height: 38 inch (965 mm)
Length: 55-1/4 inch (1403 mm)


SG24/E3HP60 ELECTRIC DUAL HEAD SURFACE GRINDERS

Specifications:


POWER SOURCE
Type: Lesson, single phase, 230 VAC, 60 Hz
RPM: 3450
Horse Power: 3HP (1.9kw)

FRAME
Structure: Unitized, welded steel plate
Bearings: High capacity, Zerk® type fittings
Drive System: Dual B Series, V-belt/pully and spur gear reduction
Multi-Accessory Disc: Two each, aluminum, counter- rotating
Disc Rotation Speed: 250 RPM

General
Width: 27-1/2 inch (699 mm)
Height: 38 inch (965 mm)
Length: 55-1/4 inch (1403 mm)


SG24/E3HP50 ELECTRIC DUAL HEAD SURFACE GRINDERS (Export)

Specifications:


POWER SOURCE
Type: Lesson, single phase, 220 VAC, 50 Hz
RPM: 2850
Horse Power: 3HP (1.9kw)

FRAME
Structure: Unitized, welded steel plate
Bearings: High capacity, Zerk® type fittings
Drive System: Dual B Series, V-belt/pully and spur gear reduction
Multi-Accessory Disc: Two each, aluminum, counter- rotating
Disc Rotation Speed: 250 RPM

General
Width: 27-1/2 inch (699 mm)
Height: 38 inch (965 mm)
Length: 55-1/4 inch (1403 mm)

 

Click Here for Application Chart

Grinding Stones - Grind or Polish Concrete

s-h alt
 
Grinding Stones

The C06 and C10 is a coarse grade and one of the most popular and provided the maximum material removal rates. They are utilized for general grinding and the removal of trowel marks., hight spots and rought sections on concrete surfaces. The average servise life is approximately : 4 to 10 hours

The C24 is a medium grade stone that will result in a lower material removal rates. It is utilized for finer finish grinding of concrete and rought grinding on terrazzo and other tyes of stone floor configurations. The average service life is approximately: 6 to 10 hours.

The C80 is a fine grade stone the will result in still lower  material removal rates. It is utilized for polishing concrete and medium grinding on terrazzo and other tyes of stone floor configurations with a water/slurry mixture only. The average service life is approximately: 8 to 20 hours.

The C120 is a super fine grade stone the will result in still lower  material removal rates. It is utilized for final polishing concrete and medium grinding on terrazzo and other tyes of stone floor configurations with a water/slurry mixture only. The average service life is approximately: 40 to 75 hours.

Specifications:  

Material:
Silicon carbide as the abrasive medium and a clay binder as the matrix.
Application:
Remove up to 1/8 inch material thickness. The larger the number, the finer the grain structure and usually, the smoother the resulting finish
Finish:
Coarse to supper fine grades available
Hints:
C10 stone most popular. Water and slurry minimizes clogging. Do not use to remove any thickness of paints, adhesives, epoxies, etc because of clogging characteristics similar to sandpaper.
Service Life:
Up to 5000 square feet.
Dimensions:
2 inch x 2 inch x 4 inch.

 

 

Click Here for Application Chart

Diamond (DIAM-A-TACH) - Grind or Polish Concrete

s-h alt
 
Diamonds - DIAM-A-TACH

White identification color, softer matrix composition, for many general purpose applications. 30 to 40 grit.

Silver identification color, medium matrix composition, for use on epoxy mortar (abrasive) or more abrasive materials. 40 to 50 grit.

Red identification color, finish matrix composition, for use on finish grinding (polishing) applications requiring minimal swirl marks. 100 to 120 grit.

Specifications:  

Material:
Industry stantard diamds
Application:
Removal of thin layers of materials without clogging,
including adhesives, epoxies, urethanes, paints and concrete.
Hints:
Segments are directionally marked to increase diamond tail
service life. Normal segment wear: .015 inch per 8 hour day. Variety
of matrix/diamond configurations available. Use wet or dry.
Finish:
Sanded finsish to a polished finished
Service Life:
Up to 50,000 square feet. (up to 15 time longer than carbide grinding stones)
Dimensions:
2 inch x 2 inch x 4 inch.

DIAM-A-TACH  - Grind or Polish Concrete | Segment System

s-h alt
 
Diamonds - DIAM-A-TACH

The SG24-2300 DIAM-A-TACH Diamond Segment Grinding System offers an innovative solution for a wide variety of surface preparation job applications. The OmnitrixâÂÑ¢ formulation allows the same matrix to be used on green concrete, high tensile epoxies, thin-film type floor coverings and fully cured concrete. Delivers balanced material removal rates and service life. This unique feature simplifies the proper matrix selection process and minimizes inventory stocking levels.


The rectangular-shaped, diamond segments have significantly greater thickness when compared to competitive products. Delivers substantially longer service life and higher ROI. The housing is directional marked for proper orientation to eliminate the top layer of tails from being inadvertently removed. Secures tight with a plastic wedge.


Use the SG24-2300 DIAM-A-TACH Grinding System with General SG12 and SG24 Series Surface Grinders and popular models of competitive single and dual head surface grinders.

Specifications:  

Material:
Industry stantard diamds
Application:
Removal of thin layers of materials without clogging,
including adhesives, epoxies, urethanes, paints and concrete.
Hints:
Unit are directionally marked to increase diamond tail
service life. Normal segment wear: .015 inch per 8 hour day. Single matric formulation for simplicity. Greater diamon segment thickness. Low acquisition cost. Use wet or dry.
Finish:
Sanded finsish to a polished finished
Service Life:
Up to 50,000 square feet. (up to 15 time longer than carbide grinding stones)
Dimensions:
5-5/8 inch (143 mm) L x 2-1/4 inch (57 mm) W x 2-1/4 inch (57 mm) H
Number of Segments per Unit:
4
Segment Grit: 30/40
Nominal Segment dimensions: 2 inch  (52 mm) L x .400 inch  (10 mm) W x .450 inch (11 mm) H
Grinding Area per Unit: 3.2 in (520 mm)
Weight, each: 2-1/4 lbs (1 kg)

 

 

Click Here for Application Chart

Scarifiers - Grind or Polish Concrete

s-h alt
 
Scarifiers
Available in carbide tipped 5 point flails for and aggressive chipping action. Also, available in multipoint hardened steel flails for a fine finish or for breaking up hardened deposits of forring matter or concrete floors.
Specifications:  

Material:
Carbided tipped or hardened steel
Application:
Roughen on concrete floors or remove hardened deposits on floors
Hints:
Not recommended for soft or "gummy" deposits.
Finish:
Very rough finish to no effect to concrete cap.
Dimensions:
2 inch x 2 inch x 4 inch

 

 

Click Here for Application Chart

SCRAPE-R-TACH - Strip Coatings From Surfaces

SG24-1900s-h alt
 
Coatings Removal System (SCRAPE-R-TACH)
The SCRAPE-R-TACH floor coatings removal system utilizes two Tungsten Carbide inserts providing 16 wear edges. Designed for removing a wide range of urethanes, rubber membranes, material buildups, paints, masticd, etc. Production rates of up to several hundred square feet per hour the SCRAPE-R-TACH system bring a quick return on investment.
 
Specifications:  

Material:
Tungston carbide
Application:
Removal of thicker layers of materials, including:
adhesives, epoxies, urethanes and paints.
Hints:
Tungsten carbide inserts feature 8 wear edges. Test procedure: scrape blunt file edge against surface to determine effectiveness. Use water and sand slurry to increase productivity on extrudable materials. Add weight to grinder to increase productivity.
Service Life:
Variable from 1 to 8 hours per wear edge.
Dimensions:
(1) Quad-insert: 1 inch x 1 inch

 

 

 

Click Here for Application Chart

WIRE BRUSH - Strip Coatings From Surfaces

s-h alt
 
Wire Brush

Flat steel wires are set in plastic blocks. Brushes quickly remove materials such a softer grease, wax, food by-products and rubber backing during carpet removal. When producing exposed aggregate slabs, wire brushes clean away the slower setting concrete while not disturbing the aggregate. Other practical uses include roughing linoleum tiles for the application of urethane coverings, the removal of blistering and peeling paint, plaster droppings and material accumulations from warehouse floors. For increase service life, bushes should be rotated between discs every hour of operation to remove any directional set. Additional weight added to the grinder will not normally increase productivity rates.

Specifications:  

Material:
Nylon plastic body with flat wire spring steel wire bristles
Application:
Remove soft deposit on floor or to "rough" up linoleum floors prior to new covering
Dimensions:
2 inch x 2 inch x 4 inch

 

 

Models and Accessories
SG24E GRINDER, SURFACE, HEAD, DUAL, 2.0HP, 115VAC, 60HZ
SG24E3HP50 GRINDER, SURFAC, HEAD, DUAL, 3HP, 220VAC, 50HZ
SG24E3HP60 GRINDER, SURFACE, HEAD, DUAL, 3HP, 60HZ, 230VAC, 60HZ
SG24-1900KIT KIT, SCRAPE-R-TACH
SG24-2104KIT KIT, DIAM-A-TACH, MATRIX, RED
SG24-2105KIT KIT, DIAM-A-TACH, MATRIX, WHI
SG24-2106KIT KIT, DIAM-A-TACH, MATRIX, SIL
SG24-2200KIT PRO-POLISH SYSTEM

 

SG24E
GRINDER, SURFACE, HEAD, DUAL, 2.0HP, 115VAC, 60HZ ** SHIP BY LTL TRUCK - 608.85 LBS APPROX WEIGHT
Mfg. item #: SG24E
GENSG24E
lease to own for as little as:$76 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$3,802.50

41
SG24E3HP50
GRINDER, SURFACE, 3HP, 50HZ, 2 ** SHIP BY LTL TRUCK - 608.85 LBS APPROX WEIGHT
Mfg. item #: SG24E3HP50
GENSG24E3HP50
lease to own for as little as:$75 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$3,771.30

41
SG24E3HP60
GRINDER, SURFACE, HEAD, DUAL, 3HP, 60HZ, 230VAC, 60HZ ** SHIP BY LTL TRUCK - 608.85 LBS APPROX WEIGHT
Mfg. item #: SG24E3HP60
GENSG24E3HP60
lease to own for as little as:$77 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$3,841.50

41
SG24-1900KIT
KIT, SCRAPE-R-TACH ** SHIPS GROUND UPS - 42 LBS APPROX WEIGHT
Mfg. item #: SG24-1900KIT
GENSG24-1900KIT
"Ships by UPS, see freight calculator at checkout."2
$859.35

41
SG24-2104KIT
KIT, DIAM-A-TACH, MATRIX, RED ** SHIPS GROUND UPS - 45.6 LBS APPROX WEIGHT
Mfg. item #: SG24-2104KIT
GENSG24-2104KIT
"Ships by UPS, see freight calculator at checkout."2
$1,089.03

41
SG24-2105KIT
KIT, DIAM-A-TACH, MATRIX, WHI ** SHIPS GROUND UPS - 10 LBS APPROX WEIGHT
Mfg. item #: SG24-2105KIT
GENSG24-2105KIT
"Ships by UPS, see freight calculator at checkout."2
$1,089.03

41
SG24-2106KIT
KIT, DIAM-A-TACH, MATRIX, SIL ** SHIPS GROUND UPS - 30 LBS APPROX WEIGHT
Mfg. item #: SG24-2106KIT
GENSG24-2106KIT
"Ships by UPS, see freight calculator at checkout."2
$1,089.03

41
SG24-2200KIT
PRO-POLISH SYSTEM ** SHIPS GROUND UPS - 10 LBS APPROX WEIGHT
Mfg. item #: SG24-2200KIT
GENSG24-2200KIT
lease to own for as little as:$59 per month!
"Ships by UPS, see freight calculator at checkout."2
$2,925.00

41
Copyright © 2018 Smith-Hamilton, Inc
0.007 180425 07:04