Stop dragging around loading and unloading your inefficient gasoline powered trash and water pumps! TrunkPumps mount to most Category 1 three point hitch tractors and are efficiently powered by the
PTO, turning your pumping requirements into an easy one-person job. TrunkPump saves time, money, labor and fatigue while improving safety, energy efficiency and maintenance upkeep.
TrunkPumps dewatering, transfer, trash and pressure pumps handle a wide variety of applications typical in construction, agriculture, grounds and turf management, golf course maintenance, highway and road building and municipal maintenance and safety.
TrunkPumps come in a range of sizes with 2, 3 and 4 inch inlets with flow rates from 140 to over 500 gallons per minute and head pressure ranges from 80 to over 200
feet. We have a special model designed to work with the popular Ventrac/Steiner tractors.
Our Guarantee is simple. If you don't love your TrunkPump, return it. No questions asked. And because you don't know when it's going to rain, and neither do we, keep the TrunkPump until you have a chance to use it up to one year. Do not wait do it today!
TP-2PTP: 2" Self-Priming Die Cast Aluminum High Pressure Pump
Use for irrigation and high head/pressure applications where moderate volume is required.
Pump: 2" self-priming die cast aluminum centrifugal pump with aluminum closed impeller, cast iron volute and EPDM seal with carbon and ceramic
Pulleys: Cast Iron
Frame: TGIC Powder Coated Steel
Dimensions: 32" L x 26" W x 37" H
Weight: 225 lbs.
Performance: 120+ gpm, 18 feet suction head, up to 88 psi, 75 psi @ 30 gpm
Low maintenance and ease of use are the main reasons. If you do not like maintaining a gas-powered pump and are tired of lugging one around, TrunkPump might be the right choice for you.
Yes, it attaches to your Category 1 three-point hitch and is powered by the Power Take Off (PTO).
Our largest pump (4 inch) requires 15hp, the others only 8hp. Most compact tractors have more than enough power to run a TrunkPump.
It is simple, by design. TrunkPump takes the power from your tractor, reverses the rotation and increases rpms from 540rpm up to 3500rpm to power the pump. All this is done on a sturdy platform for easy and safe transport.
After years of requests we now offer a hydraulically driven model that is powered by the remote hydraulics from a variety of compact equipment from a Bobcat down to the Dingo that ate my baby.
The hydraulic model requires 9gpm of hydraulic flow at 1250psi.
If you have got less flow the pump will run at low speed and not work properly. If you have more flow our priority flow manifold sends a priority flow of 9gpm/1250psi to the pump and the excess returns to your hydraulic source.
Please contact us! Email firstname.lastname@example.org call our toll-free number at 800-458-3687
Accessories make your TrunkPump even more versatile. For example, use our long and short Hose Packages with our custom Shallow Water Strainers to get the water out of golf course bunkers, basements and other low areas; or change direction and put water where you need it for washing equipment, putting out fires or crop irrigation with our Nozzle Package. Save on operation costs with the Fuel Savings Kit for 3-Point models.
Complete the TrunkPump with reinforced PVC suction hoses and PVC lay-flat discharge hoses. Custom lengths available upon request.
HP-2LG - 2" x 20' Suction Hose, 2" x 25' Discharge Hose, CS-2 Strainer w/ Elbow
Keep out unwanted trash and pump in shallow water to 1/2" with our custom Deep Draw Strainer or pump in shallow water to 1/4 inch (basements, precious turf) with our Top-Hole Strainer.
CS-2 - 2" Shallow Water Strainer 1/2" Depth w/ 90 degree Elbow
SS-2 - 2" Top-Hole Strainer 1/4" Depth w/ 90 degree Elbow
Connect to discharge hose for pressure applications such as washing equipment, fire fighting, irrigation, etc.
NP-2 - for 2" pumps, adjustable flow nozzle (2")
The Fuel Savings Kit modifies 3-Point models to pump at full capacity with throttle at 60% to conserve fuel.
FSK-1 - Fuel Savings Conversion Kit
TP-2PTP 2 HIGH PRESSURE PUMP - DIE CAST ALUMINUM, 120+GPM, UP TO 88 PSI - SELF-PRIMING PTO POWERED PUMPS (FOR CAT. 1 TRACTORS 540 RPM) ** ALL 3PT. MODELS INCLUDE TRACTOR MOUNTING HARDWARE AND PTO SHAFT
Mfg. item #: TP-2PTP
lease to own for as little as:$72 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6