Metal Cutting Saws: 12"-14" Multi-Angle Saw

Fast Precision Cutting Aluminum, Copper, Brass, Plastic

Economical to own...Economical to Operate

Complete with motor and oiler

Capacity: Nonferrous materials - 3" x 3" or 2" x
4", 45ÃÂ° -3.25" shapes.

Saws: 12"-14" Multi-Angle Saw

1.5 and 3 HP Models

Complete with motor and oiler

Product #	Description
1-1/2 HP Models (1 Phase Only)
510110	12" MULTI ANGLE 1.5 HP 115 VOL1 T 1 Ph
510111	12" MULTI ANGLE 1.5 HP 230 VOLT 1 Ph
3 HP Models (1 and 3 Phase Available)
510120	12" MULTI ANGLE 3 HP 115 VOLT 1 Ph
510121	12" MULTI ANGLE 3 HP 230 VOLT 1 Ph
510122	12" MULTI ANGLE 3 HP 208 VOLT 3 Ph
510123	12" MULTI ANGLE 3 HP 230 VOLT 3 Ph
510124	12" MULTI ANGLE 3 HP 380 VOLT 3 Ph 50 HZ
510125	12" MULTI ANGLE 3 HP 440 VOLT 3 Ph
510127	12" MULTI ANGLE 3 HP 575 VOLT 3 Ph

Note: Automatic oiler activated by motor on/off switch

Specifications
Blade Capacity	12" diameter or 14" diameter with 3 HP motor
Motor	1.5 HP or 3 HP, 1 or 3 Phase
Spindle Bearings	Heavy-duty sealed ball bearings. Lubricated for life
Arbor Shaft	5/8"
Drive	"V" belt, oil resistant
Blade Lubrication	Thru spindle and ports in the flanges. Automatic oil feed control optional. Available on single phase only
Safety Guards	Blade guarded with cast shield held in fixed position
Mitering	Pre-set stops at 45Â°, cutting head swivels both directions, locks without special tools
Shipping Weight	115-135 lbs

Abrasive Wheels: Dry Reinforced Abrasive Cutting Wheels

Link for Everett Dry Cut Abrasive Blades

All the cutting wheel grades have been developed and extensively tested to produce quality
cuts on a wide range of material alloys, sizes and shapes.

As a manufacturer of abrasive wheels, we have other grades of wet and dry abrasive wheels to meet your specific requirements. Contact us for special diameter, thickness, arbor hole and drive pin requirements of abrasive wheels.

Fiberglass Internally Reinforced Resinoid Bond Aluminum Oxide Cutting Wheels
Woven fiberglass cloth is molded in the center of the abrasive wheel for break resistance.

Grade		Description of Cutting Wheels
45FG		For general purpose cutting

23020FG		Designed for use on machines with POWERHEAD (automatic wheel feed) where free cutting ability is needed because of constant feed pressure

2069FG		Ideal for heavier wall shapes and tubing

T32 FG		For cutting thin wall shapes and thin wall tubing

GTK-7FG		Excellent for high quality dry cuts on stainless tubing and other thin wall tubing

Fiberglass Externally Reinforced Cutting Wheels
Woven fiberglass cloth is applied externally on both sides of the abrasive wheel for break resistance.

Grade		Description of Cutting Wheels
45FGE		For general purpose cutting

23020FGE		Designed for use on cutoff saws with POWERHEAD (automatic wheel feed) where free cutting ability is needed because of constant feed pressure

2069FGE		Ideal for heavier wall shapes and tubing

T32 FGE		For cutting thin wall shapes and thin wall tubing

GTK-7FGE		Excellent for high quality dry cuts on stainless tubing and other thin wall tubing

Options/Accessories
Product #	Description
519503	Automatic Oiler
519504	12" Hi Speed Steel Blade
Note: Automatic oiler activated by motor on/off switch

Everett 12-14 Multiangle Cutoff Saws

Metal Cutting Saws: 12"-14" Multi-Angle Saw

Saws: 12"-14" Multi-Angle Saw

Abrasive Wheels: Dry Reinforced Abrasive Cutting Wheels