Dry Cutting: 12" Dry Abrasive Mitering Machines
12" Abrasive-Mitering Cutoff Catalog Page
Complete with 5 HP TEFC motor, magnetic starter with 110 volt at the pushbuttons, manually operated vise
Fast, Low Cost Cutting of Hardened Tool Steel, Drills, Reamers,
Bars, Pipe, Angle Iron, Tubing, Flat Stock & Rod.
Capacity: 1.75" solid • 3" pipe • 45 deg—2.25" Most Shapes Cutting Head can swivel 45 deg left of center. Indicators for 15 deg, 30 deg,
and 45 deg. Cutting head and pedestal are mounted on a rugged swing
arm secured in lubricated-for-life bearings. Lock to hold desired
angle is quick and easy to operate.
Use a steel blade (see options below) to cut plastic, and with an oiler to cut aluminum, copper and nonferrous material.
Abrasive Wheels: Dry Reinforced Abrasive Cutting Wheels
Link for Everett Dry Cut Abrasive Blades
All the cutting wheel grades have been developed and extensively tested to produce quality
cuts on a wide range of material alloys, sizes and shapes.
As a manufacturer of abrasive wheels, we have other grades of wet and dry abrasive wheels to meet your specific requirements. Contact us for special diameter, thickness, arbor hole and drive pin
requirements of abrasive wheels.
Fiberglass Internally Reinforced Resinoid Bond Aluminum Oxide Cutting Wheels
Woven fiberglass cloth is molded in the center of the abrasive wheel for break resistance.
|
Grade
|
|
Description of Cutting Wheels
|
|
|
45FG
|
|
For general purpose cutting
|
|
|
|
|
|
|
|
23020FG
|
|
Designed for use on machines with POWERHEAD (automatic wheel feed) where free cutting ability is needed because of constant feed pressure
|
|
|
|
|
|
|
|
2069FG
|
|
Ideal for heavier wall shapes and tubing
|
|
|
|
|
|
|
|
T32 FG
|
|
For cutting thin wall shapes and thin wall tubing
|
|
|
|
|
|
|
|
GTK-7FG
|
|
Excellent for high quality dry cuts on stainless tubing and other thin wall tubing
|
|
Fiberglass Externally Reinforced Cutting Wheels
Woven fiberglass cloth is applied externally on both sides of the abrasive wheel for break resistance.
|
Grade
|
|
Description of Cutting Wheels
|
|
|
45FGE
|
|
For general purpose cutting
|
|
|
|
|
|
|
|
23020FGE
|
|
Designed for use on cutoff saws with POWERHEAD (automatic
wheel feed) where free cutting ability is needed because of constant feed pressure
|
|
|
|
|
|
|
|
2069FGE
|
|
Ideal for heavier wall shapes and tubing
|
|
|
|
|
|
|
|
T32 FGE
|
|
For cutting thin wall shapes and thin wall tubing
|
|
|
|
|
|
|
|
GTK-7FGE
|
|
Excellent for high quality dry cuts on stainless tubing and other thin wall tubing
|
