Dry Cutting: 14"-16" Dry Abrasive Mitering Machines
14"-16" Abrasive-Mitering Cutoff Catalog Page
Complete with 7.5 or 10 HP TEFC motor, magnetic starter with 110 volt at the pushbuttons, cabinet base, quick action cam lock vise
Fast, Low Cost Cutting of Hardened Tool Steel, Drills, Reamers,
Bars, Pipe, Angle Iron, Tubing, Flat Stock & Rod.
Capacity: 2" solid / 5" pipe
45 deg 1.75" Solids 3" Most Shapes
Mitering Cutting Head can swivel 45 deg left of center. Indicators for
0 deg, 15 deg, 30 deg and 45 deg. Cutting head and pedestal are mounted on
rugged swinging knee secured in lubricated for life bearings. Lock
to hold desired cutting angle is quick and easy to operate.
Use a steel blade to cut plastic, and with an oil mist spray to cut aluminum, copper
and nonferrous material
|
Cutting Speeds (average) 90 degrees
|
|
Size
|
Material
|
Time
|
|
1"
|
Angle Iron
|
2 sec.
|
|
2"
|
Angle Iron
|
4 sec.
|
|
2"
|
Cold Roll Solid
|
7 sec.
|
|
1.5"
|
Pipe
|
3 sec
|
14"-16" Dry Abrasive Mitering Machines
10 HP Mitering Models (Left to 45 deg â45 deg, 30 deg, 15 deg, 0 deg indicators)
Complete with TEFC motor, magnetic starter with 110 volt at the pushbuttons, cabinet base, quick action cam lock vise
|
Product #
|
|
Description
|
|
160152
|
|
14"-16" MIT 10 HP 208 Volt 3 Ph Mag Starter
|
|
160153
|
|
14"-16" MIT 10 HP 230 Volt 3 Ph Mag Starter
|
|
160154
|
|
14"-16" MIT 10 HP 380 Volt 3 Ph 50Hz Mag Starter
|
|
160155
|
|
14"-16" MIT 10 HP 440 Volt 3 Ph Mag Starter
|
|
160157
|
|
14"-16" MIT 10 HP 575 Volt 3 Ph Mag Starter
|
Abrasive Wheels: Dry Reinforced Abrasive Cutting Wheels
Link for Everett Dry Cut Abrasive Blades
All the cutting wheel grades have been developed and extensively tested to produce quality
cuts on a wide range of material alloys, sizes and shapes.
As a manufacturer of abrasive wheels, we have other grades of wet and dry abrasive wheels to meet your specific requirements. Contact us for special diameter, thickness, arbor hole and drive pin
requirements of abrasive wheels.
Fiberglass Internally Reinforced Resinoid Bond Aluminum Oxide Cutting Wheels
Woven fiberglass cloth is molded in the center of the abrasive wheel for break resistance.
|
Grade
|
|
Description of Cutting Wheels
|
|
|
45FG
|
|
For general purpose cutting
|
|
|
|
|
|
|
|
23020FG
|
|
Designed for use on machines with POWERHEAD (automatic wheel feed) where free cutting ability is needed because of constant feed pressure
|
|
|
|
|
|
|
|
2069FG
|
|
Ideal for heavier wall shapes and tubing
|
|
|
|
|
|
|
|
T32 FG
|
|
For cutting thin wall shapes and thin wall tubing
|
|
|
|
|
|
|
|
GTK-7FG
|
|
Excellent for high quality dry cuts on stainless tubing and other thin wall tubing
|
|
Fiberglass Externally Reinforced Cutting Wheels
Woven fiberglass cloth is applied externally on both sides of the abrasive wheel for break resistance.
|
Grade
|
|
Description of Cutting Wheels
|
|
|
45FGE
|
|
For general purpose cutting
|
|
|
|
|
|
|
|
23020FGE
|
|
Designed for use on cutoff saws with POWERHEAD (automatic
wheel feed) where free cutting ability is needed because of constant feed pressure
|
|
|
|
|
|
|
|
2069FGE
|
|
Ideal for heavier wall shapes and tubing
|
|
|
|
|
|
|
|
T32 FGE
|
|
For cutting thin wall shapes and thin wall tubing
|
|
|
|
|
|
|
|
GTK-7FGE
|
|
Excellent for high quality dry cuts on stainless tubing and other thin wall tubing
|
Options/Accessories
|
Product #
|
|
Description
|
|
169002
|
|
DUST COLLECTOR FUME EXHAUSTER
|
|
169020
|
|
MITER HOOD
|
|
169402
|
|
AIR OPERATED WORK LENGTH GAGE
|
|
169403
|
|
OUTBOARD SUPPORT
|
|
169430
|
|
QUICK ACTION CAM LOCK VISE
|
|
169470
|
|
SINGLE ACTION AIR OPERATED VISE
|
|
169502
|
|
OIL MIST SPRAY
|
Note: Prices and design subject to change without notice
Wheels: Go to Dry Cutting Abrasive Wheels to select grade and
quantity.
