Dry Cutting: 20"-22" Dry Abrasive Cutoff Machines
Complete with 10 or 20 HP TEFC motor, magnetic starter with 110 volt
at the pushbuttons, cabinet base, V chain hold-down vise
Fast, Low Cost Cutting of Hardened Tool Steel, Bars, Pipe, Angle Iron, Tubing, Flat Stock & Rod.
Capacity: 3" solids. Most 7" shapes
20"-22" Abrasive Cutoff Catalog Page
|
Cutting Speeds (average)
|
|
Size
|
Material
|
Time
|
|
2"
|
Steel Pipe
|
2 sec.
|
|
4"
|
C.I. Soil Pipe
|
4 sec.
|
|
2"
|
Stainless Steel
|
8 sec.
|
|
3"
|
Cold Rolled Steel
|
21 sec.
|
|
4"
|
Steel Channel
|
6 sec
|
Use a steel blade to cut plastic, and with an oil mist spray to cut aluminum, copper and nonferrous material
20"-22" Dry Abrasive Cutoff Machines
20 HP Standard Models
Complete with TEFC motor, magnetic starter with 110 volt at the pushbuttons, cabinet base, âVâ shaped chain hold-down vise
|
Product #
|
|
Description
|
|
200062
|
|
20"-22" 20HP 208 Volt 3 Ph, Mag Starter
|
|
200063
|
|
20"-22" 20HP 230 Volt 3 Ph, Mag Starter
|
|
200064
|
|
20"-22" 20HP 380 Volt 3 Ph, 50Hz Mag Starter
|
|
200065
|
|
20"-22" 20HP 440 Volt 3 Ph, Mag Starter
|
|
200067
|
|
20"-22" 20HP 575 Volt 3 Ph, Mag Starter
|
20 HP Hydraulic Power Head Models (PH)
Complete with hydraulic power head, TEFC motor, magnetic starter with 110 volt at the pushbuttons,
air operated âV" shaped chain hold-down vise
|
Product #
|
|
Description
|
|
202062
|
|
20"-22" PH 20 HP 208 VOLT 3 Ph, MAG STARTER
|
|
202063
|
|
20"-22" PH 20 HP 230 VOLT 3 Ph, MAG STARTER
|
|
202064
|
|
20"-22" PH 20 HP 380 VOLT 3 Ph, 50HZ, MAG STARTER
|
|
202065
|
|
20"-22" PH 20 HP 440 VOLT 3 Ph, MAG STARTER
|
|
202067
|
|
20"-22" PH 20 HP 575 VOLT 3 Ph, MAG STARTER
|
20 HP Hydraulic Power Head Models (PH)
with patented Wheel Wear Compensator (WWC)
Complete with TEFC motor, magnetic starter with 110 volt at the pushbuttons, cabinet base and
air operated âVâ shaped chain hold-down vise
|
Product #
|
|
Description
|
|
204062
|
|
20"-22" PH WWC 20 HP 208 VOLT 3 Ph, MAG STARTER
|
|
204063
|
|
20"-22" PH WWC 20 HP 230 VOLT 3 Ph, MAG STARTER
|
|
204064
|
|
20"-22" PH WWC 20 HP 380 VOLT 3 Ph 50HZ, MAG STARTER
|
|
204065
|
|
20"-22" PH WWC 20 HP 440 VOLT 3 Ph, MAG STARTER
|
|
204067
|
|
20"-22" PH WWC 20 HP 575 VOLT 3 Ph, MAG STARTER
|
20 HP Models with patented Oscillation (OSC): For improved cutting, reduced burr and longer wheel life.
Complete with TEFC motor, magnetic starter with 110 volt at the pushbuttons, cabinet base and air operated âVâ shaped chain hold-down vise
|
Product #
|
|
Description
|
|
200262
|
|
20"-22" OSC 20HP 208 Volt 3 Ph, Mag Starter
|
|
200263
|
|
20"-22" OSC 20HP 230 Volt 3 Ph Mag Starter
|
|
200264
|
|
20"-22" OSC 20HP 380 Volt 3 Ph 50Hz Mag Starter
|
|
200265
|
|
20"-22" OSC 20HP 440 Volt 3 Ph Mag Starter
|
|
200267
|
|
20"-22" OSC 20HP 575 Volt 3 Ph Mag Starter
|
20 HP Hydraulic Power Head Models (PH)
with patented Oscillation (OSC): For improved cutting, reduced burr
and longer wheel life.
Complete with TEFC motor, magnetic starter with 110 volt at the pushbuttons, cabinet base and
air operated âVâ shaped chain hold-down vise
|
Product #
|
|
Description
|
|
202262
|
|
20"-22" PH OSC 20 HP 208 VOLT 3 Ph, MAG STARTER
|
|
202263
|
|
20"-22" PH OSC 20 HP 230 VOLT 3 Ph, MAG STARTER
|
|
202264
|
|
20"-22" PH OSC 20 HP 380 VOLT 3 Ph, 50HZ, MAG STARTER
|
|
202265
|
|
20"-22" PH OSC 20 HP 440 VOLT 3 Ph, MAG STARTER
|
|
202267
|
|
20"-22" PH OSC 20 HP 575 VOLT 3 Ph, MAG STARTER
|
20 HP Hydraulic Power Head Models (PH)
with patented Wheel Wear Compensator (WWC) Oscillation: For improved cutting, reduced burr and longer wheel life.
Complete with TEFC motor, magnetic starter with 110 volt at the pushbuttons, cabinet base and
air operated âVâ shaped chain hold-down vise
|
Product #
|
|
Description
|
|
204262
|
|
20"-22" PH WWC OSC 20 HP 208 VOLT 3 Ph, MAG STARTER
|
|
204263
|
|
20"-22" PH WWC OSC 20 HP 230 VOLT 3 Ph, MAG STARTER
|
|
204264
|
|
20"-22" PH WWC OSC 20 HP 380 VOLT 3 Ph, 50HZ, MAG STARTER
|
|
204265
|
|
20"-22" PH WWC OSC 20 HP 440 VOLT 3 Ph, MAG STARTER
|
|
204267
|
|
20"-22" PH WWC OSC 20 HP 575 VOLT 3 Ph, MAG STARTER
|
Abrasive Wheels: Dry Reinforced Abrasive Cutting Wheels
Link for Everett Dry Cut Abrasive Blades
All the cutting wheel grades have been developed and extensively tested to produce quality
cuts on a wide range of material alloys, sizes and shapes.
As a manufacturer of abrasive wheels, we have other grades of wet and dry abrasive wheels to meet your specific requirements. Contact us for special diameter, thickness, arbor hole and drive pin
requirements of abrasive wheels.
Fiberglass Internally Reinforced Resinoid Bond Aluminum Oxide Cutting Wheels
Woven fiberglass cloth is molded in the center of the abrasive wheel for break resistance.
|
Grade
|
|
Description of Cutting Wheels
|
|
|
45FG
|
|
For general purpose cutting
|
|
|
|
|
|
|
|
23020FG
|
|
Designed for use on machines with POWERHEAD (automatic wheel feed) where free cutting ability is needed because of constant feed pressure
|
|
|
|
|
|
|
|
2069FG
|
|
Ideal for heavier wall shapes and tubing
|
|
|
|
|
|
|
|
T32 FG
|
|
For cutting thin wall shapes and thin wall tubing
|
|
|
|
|
|
|
|
GTK-7FG
|
|
Excellent for high quality dry cuts on stainless tubing and other thin wall tubing
|
|
Fiberglass Externally Reinforced Cutting Wheels
Woven fiberglass cloth is applied externally on both sides of the abrasive wheel for break resistance.
|
Grade
|
|
Description of Cutting Wheels
|
|
|
45FGE
|
|
For general purpose cutting
|
|
|
|
|
|
|
|
23020FGE
|
|
Designed for use on cutoff saws with POWERHEAD (automatic
wheel feed) where free cutting ability is needed because of constant feed pressure
|
|
|
|
|
|
|
|
2069FGE
|
|
Ideal for heavier wall shapes and tubing
|
|
|
|
|
|
|
|
T32 FGE
|
|
For cutting thin wall shapes and thin wall tubing
|
|
|
|
|
|
|
|
GTK-7FGE
|
|
Excellent for high quality dry cuts on stainless tubing and other thin wall tubing
|
|
Options/Accessories
|
|
Product #
|
|
Description
|
|
209001
|
|
DUST COLLECTOR FUME EXHAUSTER
|
|
209010
|
|
HOOD
|
|
209401
|
|
24" WORK LENGTH GAGE
|
|
209402
|
|
24" AIR OPERATED WORK LENGTH GAGE
|
|
209403
|
|
OUT BOARD SUPPORT
|
|
209404
|
|
24" AIR OPERATED WORK LENGTH GAGE
|
|
209410
|
|
AIR OPERATED "V" SHAPED CHAIN HOLDDOWN VISE
|
|
209420
|
|
DOUBLE ACTION AIR OPERATED VISE
|
|
209440
|
|
DOUBLE ACTION CAM LOCK VISE
|
|
209450
|
|
"T" SLOT TABLE
|
|
209502
|
|
OIL MIST SPRAY
|
|
DW20
|
|
|
20" DRY ABRASIVE WHEELS ** PRICED as ea - SOLD in boxes of 10 pcs (If ordering other than General Purpose - Please Advise when ordering)
|
|
|
DW22
|
|
|
22" DRY ABRASIVE WHEELS ** PRICED as ea - SOLD in boxes of 10 pcs (If ordering other than General Purpose - Please Advise when ordering)
|
|
Note:
Double Action Air Vise holds both sides of cut. Opens to 4"
Double Action Cam Lock Vise holds both sides of cut. Opens to 3 1/2".
Work Length Gage automatically swings up out of the way when the part is cut.
Note: Prices and design subject to change without notice
Wheels: Go to Dry Cutting Abrasive Wheels to select grade and quantity.
