Technical Sales 1–800–458–3687

General Equipment Floor Grinders Legacy Series

SG12E Surface Grinder, single head, 1.5 HP, 115 VAC, 60 HZ electric motor, includes 37 foot extension cord w/GFI, manually propelled. SG24E Surface Grinder, dual head, 2 HP, 115/230 VAC, 60 HZ electric motor, manually propelled SG24E3HP50 Surface Grinder, dual head, 3 HP, 220 VAC, 50 HZ electric motor, manually propelled. SG24E3HP60 Surface Grinder, dual head, 3 HP, 230 VAC, 60 HZ electric motor, manually propelled. SG24GH Surface Grinder, dual head, 13 HP, Honda® GXV370 gasoline engine, 4-stroke, manually propelled.
SG12E Surface Grinder, single head 1.5 HP SG24E Surface Grinder, dual head, 2 HP SG24E3HP50 Surface Grinder, dual head, 3 HP. 220 VAC, 50 HZ SG24E3HP60 Surface Grinder, dual head, 3 HP, 230 VAC, 60 HZ SG24GH Surface Grinder, dual head, 13 HP, Honda GXV370 gasoline engine

 

LEGACY SERIES SINGLE HEAD SURFACE GRINDER
MODEL DESCRIPTION WEIGHT (LBS)
SG12E Surface Grinder, single head, 1.5 HP, 115 VAC, 60 HZ electric motor, includes 37 foot extension cord w/GFI, manually propelled. 237.0
LEGACY SERIES DUAL HEAD SURFACE GRINDERS
MODEL DESCRIPTION WEIGHT (LBS)
SG24E Surface Grinder, dual head, 2 HP, 115/230 VAC, 60 HZ electric motor, manually propelled. 290.0
SG24E3HP50 Surface Grinder, dual head, 3 HP, 220 VAC, 50 HZ electric motor, manually propelled. 295.0
SG24E3HP60 Surface Grinder, dual head, 3 HP, 230 VAC, 60 HZ electric motor, manually propelled. 295.0
SG24GH Surface Grinder, dual head, 13 HP, Honda® GXV370 gasoline engine, 4-stroke, manually propelled. 307.0
LEGACY SERIES - GRINDING STONE ATTACHMENTS
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
SG24-1050 Grinding stone, extra coarse C06 grade. For removal of trowel marks, high spots, rough sections on concrete oors. Pack of 1.

1.2

All Legacy Series Single and Dual Head Grinder Models

SG24-1100 Grinding stone, coarse C10 grade. For removal of trowel marks, high spots, rough sections on concrete oors. Pack of 1.

1.2

SG24-1200 Grinding stone, medium C24 grade. For ner concrete grinding and rough grinding of terrazzo/other stone oors. Pack of 1. 1.2
SG24-1300 Grinding stone, ne C80 grade. For polishing concrete and medium grinding of terrazzo/other stone oors with a water/slurry mixture only. Pack of 1.

1.2

SG24-1400 Grinding stone, super ne C120 grade. For nal concrete polishing and medium grinding of terrazzo/other stone oors with a water/slurry mixture only. Pack of 1.

1.2

LEGACY SERIES - DIAM-A-TACHTM DIAMOND SEGMENT GRINDING ATTACHMENTS
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
SG24-2105 Grinding attachment, 30 to 40 grit, color: white. For grinding cured and green concrete plus removing, epoxies, urethanes and other high-abrasive type materials. Pack of 1.

3.7

All Legacy Series Single and Dual Head Grinder Models

SG24-2300 Grinding attachment, 30 to 40 grit. For general purpose grinding of cured and green concrete plus removing, epoxies, urethanes and other high-abrasive type materials. Pack of 1. 2.3
LEGACY SERIES - DIAM-A-TACHTM SEGMENT PINS
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
SG24-2105-010 Diamond segment pin, 30 to 40 grit, color: white. Includes roll pin and o-ring. Pack of 1. 0.4 SG24-2105
LEGACY SERIES - SCARIFIER ATTACHMENTS
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
SG24-1600 Scari er attachment with 1.750 inch diameter, 12-tooth, star ails. For roughing surfaces prior to topcoating plus removing varnish, paint epoxy and thin sets. Pack of 1.

2.4

All Legacy Series Single and Dual Head Grinder Models

SG24-1610 Scari er attachment with 1.750 inch diameter, 12-tooth, beam ails. For roughing surfaces prior to topcoating plus removing varnish, paint epoxy and thin sets. Pack of 1.

2.4

LEGACY SERIES - SCRAPE-R-TACHTM COATINGS REMOVAL SYSTEM
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
SG24-1900 Coatings removal attachment. For removing urethanes, rubber membranes, material buildups, paints and mastics. Pack of 1. 2.6 All Legacy Series Single and Dual Head Grinder Models
SG241900-030 PAK6 Tungsten carbide insert for use with SCRAPE-R-TACHTM coatings removal attachment, 8 wear edges per insert. Single pack of 6 inserts.

0.6

SG24-1900

SG241900-030 PAK12 Tungsten carbide insert for use with SCRAPE-R-TACHTM coatings removal attachment, 8 wear edges per insert. Single pack of 12 inserts.

1.1

LEGACY SERIES - WEDGES
PART NUMBER DESCRIPTION WEIGHT (LBS)

COMPATIBLE PRODUCT

SG24-1800 PLAS-T-LOKTM plastic mounting wedge. Pack of 1. 0.1 All Legacy Grinding Attachments Except SG24-2300
SG24-2310 PLAS-T-LOKTM plastic mounting wedge. Pack of 1. 0.1 SG24-2300 ONLY
LEGACY SERIES - SAFETY/DUST SHIELD KITS and EXTENSION CORD
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
SG12-1000 Safety/dust shield kit for enclosing grinding head and enhancing dust collection operations. 6.0 SG12E
SG24-1000 Safety/dust shield kit for enclosing grinding heads and enhancing dust collection operations. 7.2 All Legacy Series Dual Head Grinder Models
FCS16-1000A Extension cord, 12-3 AWG, 37 foot length with integral GFI. Pack of 1. 5.6 SG12E
LEGACY SERIES - PRO POLISH SYSTEMTM
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE MACHINES
SG12-2200KIT Diamond polishing kit for use on concrete surfaces with single head grinder. Includes storage box, mounting bolts, wrench and 1 each of driver, 50, 100, 200, 400, 800, 1500 and 3000 grit discs.

51.8

SG12E

SG24-2200KIT Diamond polishing kit for use on concrete surfaces with dual head grinder. Includes 2 storage boxes, mounting bolts, 2 wrenches and 2 each of driver, 50, 100, 200, 400, 800, 1500 and 3000 grit discs.

103.6

All Legacy Series Dual Head Grinder Models

SG12-2200-010 Driver disc, 12 inch diameter. Pack of 1. 3.0

All Legacy Series Single and Dual Head Grinder Models

SG12-2200-020 Diamond disc, 12 inch diameter, 50 grit. Pack of 1. 4.0
SG12-2200-030 Diamond disc, 12 inch diameter, 100 grit. Pack of 1. 4.0
SG12-2200-040 Diamond disc, 12 inch diameter, 200 grit. Pack of 1. 4.0
SG12-2200-050 Diamond disc, 12 inch diameter, 400 grit. Pack of 1. 4.0
SG12-2200-060 Diamond disc, 12 inch diameter, 800 grit. Pack of 1. 4.0
SG12-2200-070 Diamond disc, 12 inch diameter, 1500 grit. Pack of 1. 4.0
SG12-2200-080 Diamond disc, 12 inch diameter, 3000 grit. Pack of 1. 4.0

 

SG12E LEGACY SERIES ELECTRIC SINGLE HEAD SURFACE GRINDER

SG12E LEGACY SERIES ELECTRIC SINGLE HEAD SURFACE GRINDER

Welded, unitized frame. Single rotating multi-accessory discs with elastomeric- type gimbal heads; twin V-belt and spur gear reduction system; adjustable operator handle and wheel heights; 3 inch diameter dust collection attachment port. Includes safety and dust shield assembly kit.

Learn more about silica dust, basic planning steps and tips to help you succeed in your dust control efforts. Feel free to download our Guide to Silica Dust Control and Written Exposure Plan Template and share with others.

Specifications:

POWER SOURCE
Type: Lesson, single phase, 115 VAC, 60 Hz
Horse Power: 1-1/2HP (1.1kw)

FRAME
Structure: Unitized, welded steel plate
Bearings: High capacity, Zerk® type fittings
Drive System: Single V-belt/pully reduction
Multi-Accessory Disc: One each, aluminum, direct mounting
Disc Rotation Speed: 250 RPM
Operator Handle: Adjustable height and foldable

General
Width: 19 inch (502 mm)
Width (at operator handle): 28-1/2 inch (724 mm)
height (at operator handle extension): 40- 1/2 inch (1029 mm)
Length (handle folded): 28 inch (711 mm)
Length (at operator configuration): 39 inch (991 mm)

SG24E LEGACY SERIES ELECTRIC DUAL HEAD SURFACE GRINDER

SG24E LEGACY SERIES ELECTRIC DUAL HEAD SURFACE GRINDER

Welded, unitized frame. Dual counter rotating multi-accessory discs with elastomeric-type gimbal heads; twin V-belt and spur gear reduction system; adjustable operator handle and wheel heights; 3 inch diameter dust collection attachment port. Includes safety and dust shield assembly kit.

Learn more about silica dust, basic planning steps and tips to help you succeed in your dust control efforts. Feel free to download our Guide to Silica Dust Control and Written Exposure Plan Template and share with others.

Specifications:

POWER SOURCE
Type: Lesson, single phase, 115/230 VAC, 60 Hz
RPM: 3450
Horse Power: 2HP (1492w)

FRAME
Structure: Unitized, welded steel plate
Bearings: High capacity, Zerk® type fittings
Drive System: Dual B Series, V-belt/pully and spur gear reduction
Multi-Accessory Disc: Two each, aluminum, counter- rotating
Disc Rotation Speed: 250 RPM

General
Width: 27-1/2 inch (699 mm)
Height: 38 inch (965 mm)
Length: 55-1/4 inch (1403 mm)

SG24E3HP50 LEGACY SERIES ELECTRIC DUAL HEAD SURFACE GRINDER

SG24E3HP50 LEGACY SERIES ELECTRIC DUAL HEAD SURFACE GRINDER

Welded, unitized frame. Dual counter rotating multi-accessory discs with elastomeric-type gimbal heads; twin V-belt and spur gear reduction system; adjustable operator handle and wheel heights; 3 inch diameter dust collection attachment port. Includes safety and dust shield assembly kit.

Learn more about silica dust, basic planning steps and tips to help you succeed in your dust control efforts. Feel free to download our Guide to Silica Dust Control and Written Exposure Plan Template and share with others.

Specifications:

POWER SOURCE
Type: Lesson, single phase, 220 VAC, 50 Hz
RPM: 2850
Horse Power: 3HP (1.9kw)

FRAME
Structure: Unitized, welded steel plate
Bearings: High capacity, Zerk® type fittings
Drive System: Dual B Series, V-belt/pully and spur gear reduction
Multi-Accessory Disc: Two each, aluminum, counter- rotating
Disc Rotation Speed: 250 RPM

General
Width: 27-1/2 inch (699 mm)
Height: 38 inch (965 mm)
Length: 55-1/4 inch (1403 mm)

SG24E3HP60 LEGACY SERIES ELECTRIC DUAL HEAD SURFACE GRINDER

SG24E3HP60 LEGACY SERIES ELECTRIC DUAL HEAD SURFACE GRINDER

Welded, unitized frame. Dual counter rotating multi-accessory discs with elastomeric-type gimbal heads; twin V-belt and spur gear reduction system; adjustable operator handle and wheel heights; 3 inch diameter dust collection attachment port. Includes safety and dust shield assembly kit.

Learn more about silica dust, basic planning steps and tips to help you succeed in your dust control efforts. Feel free to download our Guide to Silica Dust Control and Written Exposure Plan Template and share with others.

Specifications:

POWER SOURCE
Type: Lesson, single phase, 230 VAC, 60 Hz
RPM: 3450
Horse Power: 3HP (1.9kw)

FRAME
Structure: Unitized, welded steel plate
Bearings: High capacity, Zerk® type fittings
Drive System: Dual B Series, V-belt/pully and spur gear reduction
Multi-Accessory Disc: Two each, aluminum, counter- rotating
Disc Rotation Speed: 250 RPM

General
Width: 27-1/2 inch (699 mm)
Height: 38 inch (965 mm)
Length: 55-1/4 inch (1403 mm)

SG24GH LEGACY SERIES GASOLINE DUAL HEAD SURFACE GRINDER

SG24GH LEGACY SERIES GASOLINE DUAL HEAD SURFACE GRINDER

Welded, unitized frame. Dual counter rotating multi-accessory discs with elastomeric- type gimbal heads; twin V-belt and spur gear reduction system; adjustable operator handle and wheel heights; 3 inch diameter dust collection attachment port. Include safety and dust shield assembly kit.

Learn more about silica dust, basic planning steps and tips to help you succeed in your dust control efforts. Feel free to download our Guide to Silica Dust Control and Written Exposure Plan Template and share with others.

Specifications:

POWER SOURCE
Type: Honda, GXV340, 4-Cycle gasoline engine
RPM: 3600
Horse Power: 11HP (82kw)
Starting Method: Mechanical rewind

FRAME
Structure: Unitized, welded steel plate
Bearings: High capacity, Zerk® type fittings
Drive System: Dual B Series, V-belt/pully and spur gear reduction
Multi-Accessory Disc: Two each, aluminum, counter- rotating
Disc Rotation Speed: 250 RPM

General
Width: 27-1/2 inch (699 mm)
Height: 38 inch (965 mm)
Length: 55-1/4 inch (1403 mm)

 

Click Here for Application Chart

Grinding Stones - Grind or Polish Concrete

SG24-1050 grinding stones
 
Grinding Stones

The C06 and C10 is a coarse grade and one of the most popular and provided the maximum material removal rates. They are utilized for general grinding and the removal of trowel marks., hight spots and rought sections on concrete surfaces. The average servise life is approximately : 4 to 10 hours

The C24 is a medium grade stone that will result in a lower material removal rates. It is utilized for finer finish grinding of concrete and rought grinding on terrazzo and other tyes of stone floor configurations. The average service life is approximately: 6 to 10 hours.

The C80 is a fine grade stone the will result in still lower  material removal rates. It is utilized for polishing concrete and medium grinding on terrazzo and other tyes of stone floor configurations with a water/slurry mixture only. The average service life is approximately: 8 to 20 hours.

The C120 is a super fine grade stone the will result in still lower  material removal rates. It is utilized for final polishing concrete and medium grinding on terrazzo and other tyes of stone floor configurations with a water/slurry mixture only. The average service life is approximately: 40 to 75 hours.

Specifications:  

Material:
Silicon carbide as the abrasive medium and a clay binder as the matrix.
Application:
Remove up to 1/8 inch material thickness. The larger the number, the finer the grain structure and usually, the smoother the resulting finish
Finish:
Coarse to supper fine grades available
Hints:
C10 stone most popular. Water and slurry minimizes clogging. Do not use to remove any thickness of paints, adhesives, epoxies, etc because of clogging characteristics similar to sandpaper.
Service Life:
Up to 5000 square feet.
Dimensions:
2 inch x 2 inch x 4 inch.

 

 

Click Here for Application Chart

Diamond (DIAM-A-TACH) - Grind or Polish Concrete

SG12-2104KIT Diamonds - DIAM-A-TACH
 
Diamonds - DIAM-A-TACH

White identification color, softer matrix composition, for many general purpose applications. 30 to 40 grit.

Silver identification color, medium matrix composition, for use on epoxy mortar (abrasive) or more abrasive materials. 40 to 50 grit.

Red identification color, finish matrix composition, for use on finish grinding (polishing) applications requiring minimal swirl marks. 100 to 120 grit.

Specifications:  

Material:
Industry stantard diamds
Application:
Removal of thin layers of materials without clogging,
including adhesives, epoxies, urethanes, paints and concrete.
Hints:
Segments are directionally marked to increase diamond tail
service life. Normal segment wear: .015 inch per 8 hour day. Variety
of matrix/diamond configurations available. Use wet or dry.
Finish:
Sanded finsish to a polished finished
Service Life:
Up to 50,000 square feet. (up to 15 time longer than carbide grinding stones)
Dimensions:
2 inch x 2 inch x 4 inch.

DIAM-A-TACH  - Grind or Polish Concrete | Segment System

SG24-2300 DIAM-A-TACH
 
Diamonds - DIAM-A-TACH

The SG24-2300 DIAM-A-TACH Diamond Segment Grinding System offers an innovative solution for a wide variety of surface preparation job applications. The Omnitrixâ„¢ formulation allows the same matrix to be used on green concrete, high tensile epoxies, thin-film type floor coverings and fully cured concrete. Delivers balanced material removal rates and service life. This unique feature simplifies the proper matrix selection process and minimizes inventory stocking levels.


The rectangular-shaped, diamond segments have significantly greater thickness when compared to competitive products. Delivers substantially longer service life and higher ROI. The housing is directional marked for proper orientation to eliminate the top layer of tails from being inadvertently removed. Secures tight with a plastic wedge.


Use the SG24-2300 DIAM-A-TACH Grinding System with General SG12 and SG24 Series Surface Grinders and popular models of competitive single and dual head surface grinders.

Specifications:  

Material:
Industry stantard diamds
Application:
Removal of thin layers of materials without clogging,
including adhesives, epoxies, urethanes, paints and concrete.
Hints:
Unit are directionally marked to increase diamond tail
service life. Normal segment wear: .015 inch per 8 hour day. Single matric formulation for simplicity. Greater diamon segment thickness. Low acquisition cost. Use wet or dry.
Finish:
Sanded finsish to a polished finished
Service Life:
Up to 50,000 square feet. (up to 15 time longer than carbide grinding stones)
Dimensions:
5-5/8â€Âù (143 mm) L x 2-1/4â€Âù (57 mm) W x 2-1/4â€Âù (57 mm) H
Number of Segments per Unit:
4
Segment Grit: 30/40
Nominal Segment dimensions: 2 inch (52 mm) L x .400 inch (10 mm) W x .450 inch (11 mm) H
Grinding Area per Unit: 3.2 in² (520 mm²)
Weight, each: 2-1/4 lbs (1 kg)

 

 

Click Here for Application Chart

Scarifiers - Grind or Polish Concrete

SG24-1610 ASSEMBLY, SCARIFIER, STAR
 
Scarifiers
Available in carbide tipped 5 point flails for and aggressive chipping action. Also, available in multipoint hardened steel flails for a fine finish or for breaking up hardened deposits of forring matter or concrete floors.
Specifications:  

Material:
Carbided tipped or hardened steel
Application:
Roughen on concrete floors or remove hardened deposits on floors
Hints:
Not recommended for soft or "gummy" deposits.
Finish:
Very rough finish to no effect to concrete cap.
Dimensions:
2 inch x 2 inch x 4 inch

 

 

Click Here for Application Chart

SCRAPE-R-TACH - Strip Coatings From Surfaces

SG24-1900SG24-1900 ASSEMBLY, SCRAPE-R-TACH
 
Coatings Removal System (SCRAPE-R-TACH)
The SCRAPE-R-TACH floor coatings removal system utilizes two Tungsten Carbide inserts providing 16 wear edges. Designed for removing a wide range of urethanes, rubber membranes, material buildups, paints, masticd, etc. Production rates of up to several hundred square feet per hour the SCRAPE-R-TACH system bring a quick return on investment.
 
Specifications:  

Material:
Tungston carbide
Application:
Removal of thicker layers of materials, including:
adhesives, epoxies, urethanes and paints.
Hints:
Tungsten carbide inserts feature 8 wear edges. Test procedure: scrape blunt file edge against surface to determine effectiveness. Use water and sand slurry to increase productivity on extrudable materials. Add weight to grinder to increase productivity.
Service Life:
Variable from 1 to 8 hours per wear edge.
Dimensions:
(1) Quad-SertâÂÑ¢ insert: 1 inch x 1 inch

 

 

 

Click Here for Application Chart

WIRE BRUSH - Strip Coatings From Surfaces

SG24-1710 ASSEMBLY, BRUSH, WIRE
 
Wire Brush

Flat steel wires are set in plastic blocks. Brushes quickly remove materials such a softer grease, wax, food by-products and rubber backing during carpet removal. When producing exposed aggregate slabs, wire brushes clean away the slower setting concrete while not disturbing the aggregate. Other practical uses include roughing linoleum tiles for the application of urethane coverings, the removal of blistering and peeling paint, plaster droppings and material accumulations from warehouse floors. For increase service life, bushes should be rotated between discs every hour of operation to remove any directional set. Additional weight added to the grinder will not normally increase productivity rates.

Specifications:  

Material:
Nylon plastic body with flat wire spring steel wire bristles
Application:
Remove soft deposit on floor or to "rough" up linoleum floors prior to new covering
Dimensions:
2 inch x 2 inch x 4 inch

 

 

SG12E
GRINDER, 1.5HP, 115VAC, 12W
Mfg. item #: SG12E
GENSG12E
lease to own for as little as:$69 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,435.98

34
SG24E
GRINDER, 2HP, 115VAC, 24W
Mfg. item #: SG24E
GENSG24E
lease to own for as little as:$90 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,479.38

34
SG24E3HP50
GRINDER, 3HP, 220VAC, 24W
Mfg. item #: SG24E3HP50
GENSG24E3HP50
lease to own for as little as:$91 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,529.07

34
SG24E3HP60
GRINDER, 3HP, 230VAC, 24W - CALL FOR PRICING
Mfg. item #: SG24E3HP60
GENSG24E3HP60
lease to own for as little as:$91 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

34
SG24GH
GRINDER, 13HP, GAS, 24W
Mfg. item #: SG24GH
GENSG24GH
lease to own for as little as:$110 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$5,484.57

34
SG24-1050
STONE, GRINDING, C06
Mfg. item #: SG24-1050
GENSG24-1050
Call for freight quote on this item or we will confirm freight charges before shipping.1
$9.50

34
SG24-1100
STONE, GRINDING, C10
Mfg. item #: SG24-1100
GENSG24-1100
Call for freight quote on this item or we will confirm freight charges before shipping.1
$9.50

34
SG24-1200
STONE, GRINDING, C24
Mfg. item #: SG24-1200
GENSG24-1200
Call for freight quote on this item or we will confirm freight charges before shipping.1
$9.50

34
SG24-1400
STONE, GRINDING, C120
Mfg. item #: SG24-1400
GENSG24-1400
Call for freight quote on this item or we will confirm freight charges before shipping.1
$9.50

34
SG24-2105
ASSY, DIAM-A-TACH, G30
Mfg. item #: SG24-2105
GENSG24-2105
Call for freight quote on this item or we will confirm freight charges before shipping.1
$225.28

34
SG24-2300
BLOCK, DIAMOND
Mfg. item #: SG24-2300
GENSG24-2300
Call for freight quote on this item or we will confirm freight charges before shipping.1
$134.30

34
SG24-2105-010
ASSY, PIN, WHITE, G30
Mfg. item #: SG24-2105-010
GENSG24-2105{02
Call for freight quote on this item or we will confirm freight charges before shipping.1
$72.45

34
SG24-1600
ASSY, SCARIFIER, STAR
Mfg. item #: SG24-1600
GENSG24-1600
Call for freight quote on this item or we will confirm freight charges before shipping.1
$74.90

34
SG24-1610
ASSY, SCARIFIER, BEAM
Mfg. item #: SG24-1610
GENSG24-1610
Call for freight quote on this item or we will confirm freight charges before shipping.1
$74.90

34
SG24-1900
ASSY, SCRAPE-R-TACH
Mfg. item #: SG24-1900
GENSG24-1900
Call for freight quote on this item or we will confirm freight charges before shipping.1
$168.96

34
Call for price. GENSG241900-030 PAK6
Call for price. GENSG241900-030 PAK12
SG24-1800
WEDGE, MOUNTING, PLAS-T-LOK
Mfg. item #: SG24-1800
GENSG24-1800
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3.25

34
SG24-2310
WEDGE, MOUNTING, PLAS-T-LOK
Mfg. item #: SG24-2310
GENSG24-2310
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2.49

34
SG12-1000
KIT, SHIELD, DUST/SAFETY
Mfg. item #: SG12-1000
GENSG12-1000
Call for freight quote on this item or we will confirm freight charges before shipping.1
$238.27

34
SG24-1000
KIT, SHIELD, DUST/SAFETY
Mfg. item #: SG24-1000
GENSG24-1000
Call for freight quote on this item or we will confirm freight charges before shipping.1
$316.06

34
FCS16-1000A
CORD, EXTENSION, GFCI, 444L
Mfg. item #: FCS16-1000A
GENFCS16-1000A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$204.48

34
SG12-2200KIT
PRO-POLISH SYSTEM
Mfg. item #: SG12-2200KIT
GENSG12-2200KIT
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,677.86

34
SG24-2200KIT
KIT, PRO POLISH
Mfg. item #: SG24-2200KIT
GENSG24-2200KIT
lease to own for as little as:$67 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,355.72

34
SG12-2200-010
DISC, DRIVER
Mfg. item #: SG12-2200-010
GENSG12-2200{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$130.04

34
SG12-2200-020
DISC, DIAMOND, 50 GRIT
Mfg. item #: SG12-2200-020
GENSG12-2200{01
Call for freight quote on this item or we will confirm freight charges before shipping.1
$194.95

34
SG12-2200-030
DISC, DIAMOND, 100 GRIT
Mfg. item #: SG12-2200-030
GENSG12-2200{02
Call for freight quote on this item or we will confirm freight charges before shipping.1
$194.95

34
SG12-2200-040
DISC, DIAMOND, 200 GRIT
Mfg. item #: SG12-2200-040
GENSG12-2200{03
Call for freight quote on this item or we will confirm freight charges before shipping.1
$194.95

34
SG12-2200-050
DISC, DIAMOND, 400 GRIT
Mfg. item #: SG12-2200-050
GENSG12-2200{04
Call for freight quote on this item or we will confirm freight charges before shipping.1
$194.95

34
SG12-2200-060
DISC, DIAMOND, 800 GRIT
Mfg. item #: SG12-2200-060
GENSG12-2200{05
Call for freight quote on this item or we will confirm freight charges before shipping.1
$194.95

34
SG12-2200-070
DISC, DIAMOND, 1500 GRIT
Mfg. item #: SG12-2200-070
GENSG12-2200{06
Call for freight quote on this item or we will confirm freight charges before shipping.1
$194.95

34
SG12-2200-080
DISC, DIAMOND, 3000 GRIT
Mfg. item #: SG12-2200-080
GENSG12-2200{07
Call for freight quote on this item or we will confirm freight charges before shipping.1
$194.95

34
Copyright © 2022 Smith-Hamilton, Inc
0.025 220524 12:21