Technical Sales 1–800–458–3687

General Equipment Strippers

FCS5AC RIP-R-STRIPPER FLOOR STRIPPER FCS10GEN2 RIP-R-STRIPPER FLOOR STRIPPER FCS16GEN3 RIP-R-STRIPPER FLOOR STRIPPER FCS18 RIP-R-STRIPPER SELF-PROPELLED FLOOR STRIPPER CTS12GEN2 RIP-R-STRIPPER
FCS5AC
RIP-R-STRIPPER
FLOOR STRIPPER
FCS10GEN2
RIP-R-STRIPPER
FLOOR STRIPPER
FCS16GEN3
RIP-R-STRIPPER
FLOOR STRIPPER
FCS18
RIP-R-STRIPPER SELF-PROPELLED FLOOR STRIPPER
CTS12GEN2
RIP-R-STRIPPER

 

RIP-R-STRIPPER SERIES FLOOR COVERING STRIPPERS (FOR SOFT MATERIALS)
MODEL DESCRIPTION WEIGHT (LBS)
FCS5AC Floor Covering Stripper, 1400W, 115 VAC, 60 HZ electric motor, hand-held. Includes blade, manually propelled. 9.7
FCS10GEN2 Floor Covering Stripper, 2300W, 115 VAC, 60 HZ electric motor. Includes blade kit, manually propelled. 44.0
FCS16GEN3 Floor Covering Stripper, .75 HP, 115 VAC, 60 HZ electric motor. Includes 37 foot extension cord w/GFI and blade kit, manually propelled. 137.2
FCS18 Floor Covering Stripper, .75 HP 115 VAC, 60 HZ electric motor drive motor, .33 HP, 230 VAC, 50 HZ electric blade motor. Includes 50 foot extension cord and blade kit, self-propelled.

220.0

RIP-R-STRIPPER SERIES FLOOR COVERING STRIPPERS (FOR HARD MATERIALS)
CTS12GEN2 Floor Covering Stripper, 9-position breaker/tool angle adjustment, side-to-side tool leveling. Accepts wide range of 35 lb class jackhammers. Includes jackhammer mounting kit and 37 foot extension cord w/GFI, less jackhammer/jackhammer tools, manually propelled. 120.0
FCS16GEN3 RIP-R-STRIPPER - EXTENSION CORD
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
FCS16-1000A Extension cord, 12-3 AWG, 37 foot length with integral GFI. Pack of 1. 5.6 FCS16GEN3
RIP-R-STRIPPER SERIES - BLADES
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
FCS5-1500 Blade, scoring, 5 inch wide. For removing carpet, linoleum and VCT from wood and concrete surfaces. Pack of 1. 0.2 FCS5AC Only
FCS16-1050PAK2 Blade, scoring, 3 inch wide. For removing high bond strength materials from concrete oors ONLY. Pack of 2. 0.9

FCS10GEN2, FCS16GEN3

FCS16-1100PAK3 Blade, straight, 6 inch wide. For removing VCT type materials from concrete oors bevel up/ from wood oors bevel down. Pack of 3.

1.5

FCS16-1200PAK2 Blade, angled, 6 inch wide. For removing mastics from concrete oors ONLY. Pack of 2.

2.7

FCS16-1300PAK3 Blade, straight, 10 inch wide. For removing VCT type materials from concrete oors bevel up/ from wood oors bevel down. Pack of 3.

2.0

FCS16-1500PAK2 Blade, scoring, 8 inch wide. For removing glued carpet, sheet linoleum, rubber and PVC type materials from concrete oors ONLY. Pack of 2.

1.3

FCS16-1600PAK2 Blade, scoring, 8 inch wide. For removing glued carpet, sheet linoleum, rubber and PVC type materials from wood oors ONLY. Pack of 2.

1.3

FCS18-2000PAK3 Blade, straight, 6 inch wide. For removing VCT type materials from concrete oors ONLY. Pack of 3. 1.4

FCS18 Only

FCS18-2100PAK3 Blade, straight, 11 inch wide. For removing VCT type materials from concrete oors ONLY. Pack of 3. 1.6
FCS18-2200PAK2 Blade, scoring, 9 inch wide. For removing glued carpet, sheet linoleum, rubber and PVC type materials from concrete oors ONLY. Pack of 2.

1.1

FCS18-2400PAK2 Blade, straight, 18 inch wide. For removing VCT type materials from concrete oors ONLY. Includes blade reinforcement. Pack of 2.

3.1

CTS12GEN2 - CHISELS and BLADES
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
102-1000 Standard moil point, 1.125 inch hexagon x 6 inch shank. Pack of 1. 5.8

CTS10, CTS12GEN2

102-1100 Standard narrow chisel, 1 inch wide, 1.125 inch hexagon x 6 inch shank. Pack of 1. 5.9
102-1200 Standard 3 inch wide chisel, 1.125 inch hexagon x 6 inch shank. Pack of 1. 6.0
102-1400 Standard 5 inch wide asphalt spade, 1.125 inch hexagon x 6 inch shank. Pack of 1. 8.5
102-1500A Scraper blade holder, 1.125 inch hexagon shank. 9.0
CTS12-1801 Scraper blade, 5.5 inch wide, AR type steel. For use with 102-1500A. Pack of 1. 1.0
CTS12-1901 Scraper blade, 8 inch wide, AR type steel. For use with 102-1500A. Pack of 1. 1.2
CTS12-2001 Scraper blade, 12 inch wide, AR type steel. For use with 102-1500A. Pack of 1. 1.8
CTS12GEN2 - EXTENSION CORD
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
FCS16-1000A Extension cord, 12-3 AWG, 37 foot length with integral GFI. Pack of 1. 5.6 CTS12GEN2
CTS12GEN2 - MOUNTING KITS
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
CTS12-1000A Mounting kit for Makita HM1500B electric powered jackhammer. 12.8

CTS12GEN2

CTS12-1100A Mounting kit for Makita HM1317CB electric powered jackhammer. 17.0
CTS12-1200A Mounting kit for Bosch 11335K electric powered jackhammer. 13.6
CTS12-1300A Mounting kit for Hilti TE095-AVR electric powered jackhammer. 14.1
CTS12-1410A Mounting kit for Hilti TE1000-AVR electric powered jackhammer. 17.2
CTS12-1600A Mounting kit for Hitachi H65SD2 electric powered jackhammer. 13.6
CTS12-2100A Mounting kit for DeWalt D24941K and Kits come complete with all mounting hardware. D25951K electric powered jackhammer. 13.5

 

FCS5AC RIP-R-STRIPPER FLOOR STRIPPER

FCS5AC RIP-R-STRIPPER FLOOR STRIPPER

The FCS5AC RIP-R-STRIPPER is a highly productive solution for removing a wide range of floor covering materials found on both commercial and DIY projects. Its small size and light weight design makes it highly productive in hard to reach areas such as bathrooms, closet areas and stairways. The FCS5AC works circles around larger stripper machines that lack the same agility and maneuverability. Use it to also remove accumulated layers of thick wallpaper or other strippable materials from vertical surfaces. The ergonomically designed handle enhances balance and helps reduce vibration levels. Adjusts for use under toekick panels. The 5 inch (127 mm) scoring blade can be used to remove coverings from both wood and concrete surfaces.

Specifications

Operating Environment: Non-hazardous type locations
Electric Motor: 1400 W, 115 VAC, 60HZ, 12 amperes
Nominal Oscillations: 3100/minute
Extension Cord: 16-2 SJ x 8 foot (2.4 m) length

GENERAL
Dimensions: 15” (381 mm)L x 5” (127 mm)W x8” (203 mm)H (handle extended, w/blade)
Weight: 9 lbs (4.1 kg), less blade

 

FCS10GEN2 RIP-R-STRIPPER FLOOR STRIPPER

FCS10GEN2 RIP-R-STRIPPER FLOOR STRIPPER

The FCS10GEN2 RIP-R-STRIPPER is a highly productive solution for removing a wide range of floor covering materials found on both commercial and DIY projects. Its small size and light weight design makes it highly productive in hard to reach areas such as bathrooms, closets and foyers. The detachable operator handle allows for easy transport in today’s smaller vehicles. Enhanced operator ergonomics and precise balance allow the FCS10GEN2 to work circles around larger stripper machines that lack the same agility and maneuverability. A wide range of straight and scoring type blades up to 10 inch cutting width are available for use on wood and concrete surfaces.

Specifications:

Operating Environment: Non-hazardous type locations
Electric Motor: 2300W, 115VAC, 60HZ, 15 amperes
Nominal Oscillations: 3400/minute
Frame: Unitized, welded steel plate
Drive System: Random orbit, direct shaft mount
Extension Cord: 14-2 SJ x 13 foot (3.9 m) length

GENERAL
Frame Width: 8-1/4 inches (210 mm)
Frame Length: 23-1/4”(w/o blade)
Operator Handle Width: 23-3/64 inches (585.5 mm)
Operating Length: 36-13/32 inches (924.8 mm) (w/o blade)
Operating Height: 43-1/2 inches (1105 mm) (w/o blade)
Weight: 44 lbs (19.6 kg), less blade

 

FCS16GEN3 RIP-R-STRIPPER® FLOOR STRIPPER

FCS16GEN3 RIP-R-STRIPPER FLOOR STRIPPER

The FCS Series RIP-R-STRIPPERS have revolutionized the industry with their innovative design and operational features. Quickly remove VCT tiles, rubber-backed carpeting and sheet type coverings from wood and concrete surfaces. Adjust blade attack angle without stopping work using the Back-Saver Blade Control System for maximum productivity. The blade clamping system prevents unwanted flooring material under clamp build ups further improving long term maintenance costs. Convenient, integral, 16 lb static weights eliminate maintenance and chance for lost parts. Adjustable operator handle with quick release feature easily folds for compact transport. Direct-drive, random orbit action. Welded, unitized frame. Includes 1 each, part number FCS16-1100, 4” x 6” straight blade and 1 each part number FCS16-1300, 3” x 10” straight blade.

Specifications:

Operating Environment: Non-hazardous type locations
Electric Motor: .75HP, 115 VAC, 60 Hz, 15 amperes
Nominal Oscillations: 1725/minute
Frame: Unitized, welded steel plate
Bearings: Ball-type
Drive System: Direct
Extension Cord: 12-3, SJTW x 37 ft (11 m) L, w/GFCI

GENERAL
Width: 14-1/2 inch (368 mm)
Width (operator handle): 23 inch (584 mm)
Height (operator handle extended): 42 inch (1067 mm)
Length (operator handle extended): 34 inch (864 mm)
Length (operator handle folded): 24 inch (610 mm)
Weight: 149 lbs (68 kg), less blade and extension cord

 

FCS18 RIP-R-STRIPPER SELF-PROPELLED FLOOR STRIPPER FCS18 RIP-R-STRIPPER SELF-PROPELLED FLOOR STRIPPER

Take the work out of flooring removal projects!

Built to efficiently remove VCT tiles, rubber-backed carpeting and sheet type coverings from concrete surface, the RIP- R-STRIPPER® will make quick work of floor stripping projects. This self-propelled floor stripper has the ability to remove up to 720 square feet per hour with direct-drive, random orbit action.

System Features:

  • Self-propelled
  • Intuitive forward and reverse controls
  • Variable speed forward
  • Fixed speed reverse
  • Emergency stop button
  • Dual electric motors
  • 18" maximum blade cutting width
  • 4-bold blade clamping system
  • Integral, maneuver-ease wheels
  • Easy removal side plates and operator handle for compact transport

Specifications:

POWER SOURCE
Blade Motor: .75 HP, 115 VAC, 60 Hz
Dive Motor: .33 HP, 230 VAC, 50 Hz
Power Requirements: 115 VAC, 60 Hz, 15 Amperes
Travel Speed: Forward-variable 0 to 1 ft/sec. Reverse-fixed @ 1.5 ft/sec

FRAME
Structure: Unitized, welded steel with removable side plates
Bearings: Ball-type
Driveshaft System: Blade, direct to motor. Forward/reverse direction controlled by frequency converter/solid state electric design.
External Weights: Two 50 lb removable side plates
Blade Rentention: 4-Bolt clamping system
Handling: Integral, maneuver-ease wheels
Operator Handle: Adjustable pivot, removable for transport

GENERAL
Width: 9 inch (229mm)
Width (operator handle): 14 inch (356mm)
Height: (with operator handle): 41.6 inch (1057mm) approximate
Length: (with operator handle): 51.3 inch (1303mm) approximate
Length: (operator handle removed): 27 inch (686mm) approximate

 

CTS12GEN2 RIP-R-STRIPPER

CTS12GEN2 RIP-R-STRIPPER

The new CTS12GEN2 RIP-R-STRIPPER® is highly productive for removing ceramic tile, hardwood flooring and other materials from cement surfaces. Breaks through today’s high bond strength mastics, glues and thinsets for both commercial and DIY projects. The unit accepts a wide range of 35 lb class breakers and related accessory tools. Unique design significantly reduces jobsite related exposure to knee and lower back issues – no more stooping, squatting or kneeling. Wide stance for superior handling and stability. Highly adjustable to fit operator and application. Accessory tool leveling to reduce blow force requirements, operator fatigue and uneven tool wear while increasing productivity.

OPERATING ENVIRONMENTS
Non-hazardous type locations

POWER SOURCE
35 lb weight class electric breakers, 115 VAC, 15 ampere from Bosch, DeWalt, Hilti, Hitachi, and Makita

OUTSIDE WHEEL WIDTH
21-1/4 inch (540mm)

HANDLE WIDTH
30 inch (762mm)

TRANSPORT LENGTH
28 inch (711mm), less breaker

ACCESSORIES
Includes mounting kit for specific breaker plus 37 foot long extension cord
Tools: Industry standard 1-1/8 inch hexagon x 6 inch shank chisels and blades adaptors

WEIGHT
130 lbs (59 kg), less breaker

 

ATTACHMENT

TYPE

VINYL

TILE

LINOLEUM

RUBBER-

BACKED

CARPET

JUTE-BACKED

CARPET

CREAMIC TILE

MASTIC

ADHESIVE

THIN

SET

MATERIAL

BUILD-UP

s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
Mastic Removal
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
Dual Beveled
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
Scoring
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
s-h alt
Single Beveled
                 

Strip Coatings From Surfaces

s-h alt
 
Mastic Removal
The single beveled mastic removal blade is utilized to remove a wide variety of  adhesives, mastics and material residues from concrete surfaces. The steep angle increases the cutting edge position relative to the floor surfaces. The angle increases allows the blade to better penitrate the material and then shear and scrape it from the floor surface. the cutting edge faces down toward the floor surface. Angled mastic blades are utilized on concrete surface ONLY! Not intended to be used on a wood surface; blade will only dig into surface. The blade will NOT flip over.
Specifications: FCS-1200

Material:
Laser cut, heat-treated, steel, sharpen edge
Application:
Mastic, adhesive and material build-up removal.
Hints:
Not intended to remove actual floor covering materials. Remove remaining material residue and mastic/adhesive on concrete floor ONLY. Steeper blade angle increases material removal rates over other blade configurations.
Dimensions:
4 inch x 6 inch x 1.5mm nominal

Strip Coatings From Surfaces

s-h alt
 
Dual Beveled
The dual beveled blade is utilized to remove a wide variety of VCT and linoleum tiles along with general material removeal from concrete and wood surfaces. There are two types: bevel up for concrete and bevel down for wood. This allows the blade to skim over the surface and minimize an tendency to gouge or dig into the material. The blade will flip over.
Specifications: FCS16-1100

Material:
Laser cut, heat-treated, steel, sharpen edge
Application:
General purpose material removal. Narrow width increases productivity against difficult to remove materials. Dual edges double blade service life.
Hints:
Position beveled edge UP on concrete floor. Position beveled edge DOWN on wood floor. Blade can be field sharpened.
Dimensions:
4 inch x 6 inch x 1.5mm nominal

Strip Coatings From Surfaces

s-h alt
 
Scoring
The single beveled blade is utilized to remove glued type carpets and soft sheet types (PVC, rubber, linoleum, etc) materials from concrete to wood surfaces. There are two types: bevel up for concrete and bevel down for wood. This allows the blade to skim over the surface and minimize an tendency to gouge or dig into the material. The cutting wings score the covering material to aid in removal. Specific part numbers are available for removing  covering materials from either concrete or wood surfaces. The blade will NOT flip over.
Specifications: FCS-1600

Material:
Laser cut, heat-treated, steel, sharpen edge
Application:
Remove rubber-back carpet and linoleum.
Hints:
Blades are NOT interchangeable for use on concrete and wood floors. Use proper blade for application. Position beveled edge UP on concrete floor. Position beveled edge DOWN on wood floor. Blade can be field sharpened.
Dimensions:
3 inch x 8 inch x 1.5mm nominal

Strip Coatings From Surfaces

s-h alt
 
Single Beveled
The single beveled blade is utilized to remove a wide variety of VCT and linoleum tiles along with general material removeal from concrete and wood surfaces. There are two types: bevel up for concrete and bevel down for wood. This allows the blade to skim over the surface and minimize an tendency to gouge or dig into the material. The blade will NOT flip over.
Specifications: FCS-1300

Material:
Laser cut, heat-treated, steel, sharpen edge
Application:
General purpose material removal. Wider width increases productivity against easy to remove materials.
Hints:
Blade can be used on both concrete and wood floors. Position beveled edge UP on concrete floor. Position beveled edge DOWN on wood floor. Blade can be field sharpened.
Dimensions:
3 inch x 10 inch x 1.5mm nominal

 

 

LIMITED PRODUCT WARRANTY

GENERAL EQUIPMENT COMPANY makes the following limited warranty to the original purchaser of each new and unused light construction equipment product:

GENERAL EQUIPMENT COMPANY MAKES NO WARRANTY THAT THE LIGHT CONSTRUCTION PRODUCTS SOLD HEREUNDER SHALL BE MERCHANTABLE OR THAT SUCH PRODUCTS SHALL BE FIT FOR ANY PARTICULAR PURPOSE AND THERE ARE NO WARRANTIES EXPRESSED OR IMPLIED MADE OTHER THAN ITS STANDARD, LIMITED WARRANTY.

WHAT THE LIMITED WARRANTY COVERS

GENERAL EQUIPMENT COMPANY warrants that each new and unused light construction equipment product and or accessory product sold by it: A) to be free from defects in material and workmanship under normal use/service for a period of two (2) years from date of purchase: B) to warrant the labor expenses associated with defects in material and workmanship for a period of one (1) year from date of purchase. The obligation under this warranty being limited to current flat labor rates and the replacement and/or repair at its Owatonna, Minnesota, factory site, or at an authorized dealer designated by it, of such part or parts as shall appear upon inspection to have been defective in material or workmanship at the time sold, provided that the part or parts claimed defective are returned to the inspection point, transportation charges prepaid. At the time of requesting warranty service, the purchaser must present evidence of the purchase date of the part or parts submitted for warranty inspection.

The only remedies the purchaser has in connection with the breach of performance of any warranty for the light construction equipment products sold by GENERAL EQUIPMENT COMPANY are those set forth in this document. In no event will GENERAL EQUIPMENT COMPANY, its authorized dealer or representative, or any company affiliated with GENERAL EQUIPMENT COMPANY be held liable for any incidental or consequential damages or injuries.

WHAT THE LIMITED WARRANTY DOES NOT COVER

This warranty does not cover depreciation or damage caused by: normal wear, accident, improper protection in storage, improper use, alterations, tampering, the environment, improper maintenance, lack of maintenance or incidental costs incurred by the original purchaser while the light construction equipment product is being examined and or repaired under warranty. In addition to the above limitations and/or exclusions, the following basic product components are not covered by the limited warranty:

1) Parts and/or components subject to wear with normal usage, but not specifically limited to the following:

a) High impact/wear related components including, but not limited to: V-belts, flails, flail rods and flail drums.
b) High abrasion/wear related components including, but not limited to: augers, auger flighting and boring heads.
c) Engine throttle control cable assembly and related control devices.
d) Centrifugal clutch components including, but not limited to: shoes, springs, drum and motor assembly.

2) Parts and labor for scheduled and general maintenance services as defined in the applicable Operators Manual.

3) Engines, motors, controls and other accessories sold with, attached to, or operated with a light construction equipment product sold by GENERAL EQUIPMENT COMPANY and warranted separately by the Original Equipment Manufacturer (OEM) per its respective warranty program. Contact the Customer Service Department of GENERAL EQUIPMENT COMPANY for assistance in obtaining specific OEM warranty coverage.

This limited warranty gives you specific legal rights and may also have other rights which may vary from state to state. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. These limitations may not apply to the original purchaser.

FCS5AC
STRIPPER, 1400W, 115VAC, 5W
Mfg. item #: FCS5AC
GENFCS5AC
Call for freight quote on this item or we will confirm freight charges before shipping.1
$939.12

210
FCS10GEN2
STRIPPER, 2300W, 115VAC, 10W
Mfg. item #: FCS10GEN2
GENFCS10GEN2
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,524.98

210
FCS16GEN3
STRIPPER, .75HP, 115VAC, 10W
Mfg. item #: FCS16GEN3
GENFCS16GEN3
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,121.21

210
FCS18
STRIPPER, PROPELLED, 115VAC, 18W
Mfg. item #: FCS18
GENFCS18
lease to own for as little as:$177 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$8,859.91

210
CTS12GEN2
CART, STRIPPER, TILE, GEN2
Mfg. item #: CTS12GEN2
GENCTS12GEN2
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,666.39

210
FCS16-1000A
CORD, EXTENSION, GFCI, 444L
Mfg. item #: FCS16-1000A
GENFCS16-1000A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$201.50

210
FCS5-1500
BLADE, SCORING, 5W
Mfg. item #: FCS5-1500
GENFCS5-1500
Call for freight quote on this item or we will confirm freight charges before shipping.1
$13.00

210
FCS16-1050PAK2
PAK2, BLADE, SCORING, 3W
Mfg. item #: FCS16-1050PAK2
GENFCS16-105{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$42.92

210
FCS16-1100PAK3
PAK3, BLADE, STRAIGHT, 6W
Mfg. item #: FCS16-1100PAK3
GENFCS16-110{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$64.35

210
FCS16-1200PAK2
PAK2, BLADE, REMOVAL, MASTIC, 6W
Mfg. item #: FCS16-1200PAK2
GENFCS16-120{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$76.60

210
FCS16-1300PAK3
PAK3, BLADE, STRAIGHT, 10W
Mfg. item #: FCS16-1300PAK3
GENFCS16-130{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$64.35

210
FCS16-1500PAK2
PAK2, BLADE, SCORING, CEMENT, 8W
Mfg. item #: FCS16-1500PAK2
GENFCS16-150{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$71.28

210
FCS16-1600PAK2
PAK2, BLADE, SCORING, WOOD, 8W
Mfg. item #: FCS16-1600PAK2
GENFCS16-160{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$71.28

210
FCS18-2000PAK3
PAK3, BLADE, STRAIGHT, 6W
Mfg. item #: FCS18-2000PAK3
GENFCS18-200{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$64.65

210
FCS18-2100PAK3
PAK3, BLADE, STRAIGHT, 11W
Mfg. item #: FCS18-2100PAK3
GENFCS18-210{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$64.65

210
FCS18-2200PAK2
PAK2, BLADE, SCORING, CEMENT, 9W
Mfg. item #: FCS18-2200PAK2
GENFCS18-220{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$64.76

210
FCS18-2400PAK2
PAK2, BLADE, STRAIGHT, 18W
Mfg. item #: FCS18-2400PAK2
GENFCS18-240{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$74.83

210
102-1000
Mfg. item #: 102-1000
GEN102-1000
Call for freight quote on this item or we will confirm freight charges before shipping.1
$48.50

210
102-1100
Mfg. item #: 102-1100
GEN102-1100
Call for freight quote on this item or we will confirm freight charges before shipping.1
$48.50

210
102-1200
Mfg. item #: 102-1200
GEN102-1200
Call for freight quote on this item or we will confirm freight charges before shipping.1
$69.75

210
102-1400
Mfg. item #: 102-1400
GEN102-1400
Call for freight quote on this item or we will confirm freight charges before shipping.1
$169.17

210
102-1500A
ASSY, HOLDER, BLADE, SCRAPER
Mfg. item #: 102-1500A
GEN102-1500A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$168.05

210
CTS12-1801
BLADE, SCRAPING, 6W
Mfg. item #: CTS12-1801
GENCTS12-1801
Call for freight quote on this item or we will confirm freight charges before shipping.1
$24.16

210
CTS12-1901
BLADE, SCRAPING, 8W
Mfg. item #: CTS12-1901
GENCTS12-1901
Call for freight quote on this item or we will confirm freight charges before shipping.1
$30.90

210
CTS12-2001
BLADE, SCRAPING, 12W
Mfg. item #: CTS12-2001
GENCTS12-2001
Call for freight quote on this item or we will confirm freight charges before shipping.1
$38.11

210
CTS12-1000A
MOUNT, MAKITA, HM1500B
Mfg. item #: CTS12-1000A
GENCTS12-1000A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$403.14

210
CTS12-1100A
MOUNT, MAKITA, HM1317CB
Mfg. item #: CTS12-1100A
GENCTS12-1100A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$403.14

210
CTS12-1200A
MOUNT, BOSCH, 11335K
Mfg. item #: CTS12-1200A
GENCTS12-1200A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$403.14

210
CTS12-1300A
MOUNT, HILTI, TE905
Mfg. item #: CTS12-1300A
GENCTS12-1300A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$403.14

210
CTS12-1410A
MOUNT, HILTI, TE1000
Mfg. item #: CTS12-1410A
GENCTS12-1410A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$403.14

210
CTS12-1600A
MOUNT, HITACHI, H65SD2
Mfg. item #: CTS12-1600A
GENCTS12-1600A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$403.14

210
CTS12-2100A
MOUNT, DEWALT, D25941K
Mfg. item #: CTS12-2100A
GENCTS12-2100A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$403.14

210
Copyright © 2024 Smith-Hamilton, Inc
0.025 240308 10:51