Call 1–800–458–3687 or  Email us!

PowerMatic SLR12 Straight Line Rip Saw

Receive a FREE Amana 10 inch Saw Blade for just 
with the Purchase of Select Table Saws

Promo Code 04-C010060TCZ (Shipping charges required on select models)

1791285 Brochure
1791285 Manual

Whether its face frames, long runs or full production, the SLR12 Straight Line Rip Saw has every job covered. Powered by a 15HP main motor, this saw has the capacity for virtually any job. The 12 inch main blade mounts on a high alloy, heat treated arbor that is precision ground and dynamically balanced for maximum stability and long durability. The caterpillar feed chain blocks are constructed of special grade cast iron that is heat treated and precision machined. The track travels on hardened V way guides insuring rigidity and accuracy. A full brush cleaning system with auto-oiler and shut-off gives the conveyor a long service life. All of this is driven by a 2HP feed motor with variable speed to perfectly match the feed rates with your production and finish requirements. A series of seven stock hold downs keep each work piece flat and straight throughout the cutting cycle. Dual anti-kickback devices help prevent discharge of work pieces. The heavy-duty precision rip fence travels on a solid steel guide rail and is micro-adjustable for fast, accurate set up. Controls for rip width, cutting depth, main and feed motors are all mounted up front for fast job changes. The large cast iron table surface supports any size stock and the efficient dust collection port insures a clean work area. From the kiln or cutting glue line, get your production up and running today with the SLR12 from POWERMATIC

  • Full cast iron construction for rock-solid operation
  • 15HP Main Motor, 2HP Feed Motor for large production capacity
  • Auto-oiler with shut off ensures long conveyor chain life
  • Seven pressure rollers with dual anti-kickback devices help prevent stock discharge
  • Variable feed speeds to accomodate different type stock
  • Large 18 inch rip and 3-7/8 inch depth of cut capacities for virtually any job
  • Adjustable position control box for operator convenience

 

Part Number 1791285  
Blade Speed 4500 RPM
Feed Speed 30-125 fpm (variable)  
Arbor Diameter 1 inch
Blade Diameter 12 inch
Maximum Depth of Cut 3 7/8 inch
Maximum Ripping Width 18 inch
Pressure Rollers 7  
Anti-Kickback Devices 2  
Table Size (L x W) 35 x 55 inch
Table Height 32 inch
Dust Port Outside Diameter 3 7/8 inch
Dust Collection Minimum CFM Required 600 cu.ft/min
Shipping Dimensions (L x W x H) 62 x 66 x 45 inch
Electric Controls 24V Magnetic Starter  
Motor Power 15 HP
Motor Voltage 230 / 460 V  
Prewired Voltage 230 V
Motor Phase 3 Ph
Feed Motor Power 2 HP
Feed Motor Voltage 230 V  
Feed Motor remarks Pre-wired 230V. 460V requires additional magnetic switch purchase  
Feed Motor Phase 3 Ph
Model Number SLR12  
Brand Powermatic  
Overall Dimensions 62 x 56 x 41  
Height 62 inch
Width 56 inch
Length 41 inch
Net Weight 2090 pound

 

s-h alt WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC tools. 

 

POWERMATIC STRAIGHT LINE RIP SAW and Accessory
1791285 SLR12 Straight Line Rip Saw, 15HP 3PH 230/460V
oliver 0812 Circular blade sharpener

Finally, a sharpener for every home shop that will make your cutting job more efficient and easier at anytime and anywhere. All you need is the 0812 Circular Blade

Sharpener and a hand grinder with our included diamond grinding wheel, and you can save your workshop upkeep and have your blades in prime condition for efficiency and safety assurance.

Easy to use and almost hands free grinding allows you to
configure the sharpener to work with blades from 7.5 to 12 inch in diameter with 5/8 or 1 inch arbor.

Packaging Size

  • NW/GW: 24lbs/26.5lbs
  • 10 x 20 x 18.5 inch
  • 4 inch Angle grinder required for use
    (Not Included)

Features:

  • Sharpens circular saw blades from 7.5 to 12 inch diameter.
  • Portable compact design.
  • Sturdy die casting iron base.
  • 4 inch diamond blade included
  • Suitable for regular blades and carbide tip blades.
  • 2 Year Limited Warranty

Oliver cicular saw blade sharpener
812 Circular Saw Blade Sharpener

 

PM9-1791285
SLR12 STRAIGHT LINE RIP SAW, 15HP 3PH 230/460V, SHIPS LTL TRUCK FREIGHT, MADE IN TAIWAN, WGT = 2530 LBS

CALL 800-458-3687 OR ADD TO CART FOR THE BEST BROTHER-IN-LAW DEAL ON THIS ITEM ** FREE FREIGHT & FREE RESIDENTIAL, LIFTAGTE & DELIVERY APPOINTMENT WHEN REQUESTED: NO HANDLING FEES
Mfg. item #: PM9-1791285
WMH1791285
lease to own for as little as:$382 per month!
Free freight for Jet-Powermatic-Wilton orders over $1,500. ALWAYS FREE Residential and Liftgate when Requested.1057
$19,999.99

91
812
CALL 800-458-3687 FOR PRICING - SAW
Mfg. item #: 812
OLV812
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

80   1
Copyright © 2024 Smith-Hamilton, Inc
0.004 240426 13:10