Technical Sales 1–800–458–3687

PowerMatic 25" Planer

 

s-h alt  s-h alt

POWERMATIC WP2510 25 inch PLANER

The POWERMATIC WP2510 Planer has a solid steel helical cutterhead with four-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting up table heights is quick and easy. The frame is machined from heavy cast iron and has extra wide side panels that offer rigid bed support and ensure accurate alignment. The planer's segmented, serrated infeed roll with segmented chip breakers has an independent yield of 1/4. Its automatically adjusting, chain drive gear box powers the 3 inch diameter infeed rollers, solid pressure bar and dual outfeed rollers for precise feeding of stock. The 3-speed feed selector gives woodworkers flexibility by changing feed rates quickly and easily. The WP2510 Planer has a large 32-3/16 x 26 inch precision-ground table which contains two adjustable table rollers for smooth feeding of uneven stock. The planer has a Quick-Set micro-adjustable lever that easily raises and lowers the table rollers from 0 to 0.05". The hood features a built-in 5" diameter dust chute.

  • Solid steel helical insert head with four-sided carbide insert tooling, eliminates need for adjustment after changing knives, reduces sound levels
  • Digital readout and simple PC controller make quick and easy table height set ups
  • Segmented serrated infeed roll with segmented chip breakers has 1/4" independent yield, for planing multiple height stock
  • Massive gear box maintains positive feed by using a large chain drive with automatic chain tensioners, to power infeed and outfeed rollers
  • 3" diameter infeed and outfeed rollers are supported by four large, sealed, needle bearings for long life
  • Quick-Set micro-adjustable lever easily raises and lowers table rollers from 0" to 0.050" at a touch
  • Frame machined from heavy cast iron and extra wide side panels with gibs, offers rigid bed support and accurate alignment
  • Solid pressure bar has wide foot for long wear and can be adjusted on both ends for precise feeding
  • 3 speed feed selector allows you to quickly change feed rates
  • Large 32-3/16 x 26 precision-ground table contains two adjustable table rollers for smooth feeding of uneven stock
  • Dust hood features built-in 5" dust chute for efficient dust collection
  • Standard Equipment:
  • Helical head with four sided inserts
  • Dust hood with 5" diameter dust port
  • Segmented infeed rollers
  • Segmented chip breakers
  • Tool kit with pneumatic screwdriver for removing the cutterhead insert blades
Part Number 1791303  
Maximum Planing 25 "
Maximum Planing Thickness 9 "
Maximum Full Width Depth of Cut 1/8 "
Maximum Depth of Cut ¼ "
Minimum Planing Length 10 "
Cutterhead Diameter 3 3/8 "
Cutterhead Speed 5000 RPM
Cuts Per Minute 30000  
Feed Rate 20, 25 and 30 FPM  
Outfeed Roller Diameter 3 "
Number of Knives 174 Four-sided inserts  
Table Size 32 3/16" x 26"  
Dust Port Diameter 5 "
Dust Collection Minimum CFM Required 600 cu.ft/min
Bed Rollers Adjustable from Front 0 " to 0.05 "  
Readout Scale inch/ metric  
Segmented Infeed Roller Diameter 3 "
Table Height Adjust Manual 1 Turn = 1/32"  
Table Support 2 column  
Tool Supplied tool kit  
Column Diameter 2½ "
Maximum Height of Rollers Parallel to Tabletop 0.05 "
Rollers 1 infeed, 2 outfeed  
Motor Power 15 HP
Motor Phase 3 Ph
Motor Voltage 230 V
Prewired 230 V
Model Number WP2510  
Brand Powermatic  
Overall Dimensions 52 x 36 x 59  
Height 59 inch
Width 36 inch
Length 52 inch
Net Weight 1725 pound
s-h alt WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

 

POWERMATIC® 25" PLANERS and Accessories
1791303 WP2510, 25" Planer, 15HP 3PH 230/460V
1791212 Inserts for SHELIX Heads (set of 10)
1791303
WP2510, 25 PLANER, 15HP 3PH 230/460V - SHIPS LTL TRUCK FREIGHT
CALL 800-458-3687 X1 FOR OUR EXCLUSIVE BROTHER-IN-LAW DEAL
Mfg. item #: 1791303
WMH1791303
lease to own for as little as:$287 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$14,999.99

28
1791212
Mfg. item #: 1791212
WMH1791212
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$69.99

28
Copyright © 2020 Smith-Hamilton, Inc
0.004 190524 13:24