Call 1–800–458–3687 or  Email us!

Rikon Lathes

70-100 12 inch x 16 inch lathe 70-105 10 inch x 18 inch lathe 12 inch x 16-1/2 inch Midi VSR Lathe
70-100 12 inch x 16 inch lathe 70-105 10 inch x 18 inch lathe 70-150VSR 12 inch x 16-1/2 inch
Midi VSR Lathe
70-1420VSR: 14 inch x 20 inch Midi VSR Lathe 70-1824VSR: 18 x 24 inch VSR Lathe - 70-1824VSR2: 18 x 24 inch VSR2 Lathe  30 inch x 40 inch VSR Lathe with Sliding Bed
70-1420VSR: 14 inch x 20 inch
Midi VSR Lathe
70-1824VSR: 18 x 24 inch VSR Lathe 70-1824VSR2: 18 x 24 inch VSR2 Lathe 70*3040 30 inch x 40 inch
VSR Lathe with Sliding Bed

 

Models and Accessories
70-100 Mini Lathe
70-105 10 inch x 18 inch  1/2 HP Mini Lathe
70-150VSR 12 inch x 16-1/2 inch Midi VSR Lathe
70-1420VSR 14 inch x 20 inch Midi VSR Lathe
70-1824VSR 18 inch x 24 inch VSR Lathe
70-1824VSR2 18 inch x 24 inch VSR2 Lathe
70-3040 30 inch x 40 inch VSR Lathe with Sliding Bed
Accessories
70-800 4-Piece Turning Tool Set with Carbide Insert Cutters
70-900B Mini Lathe Extension Bed for 70-100 Blue
70-920 Mini Lathe Stand for 70-100
70-912 12 inch Tool Rest 1 inch  Post
70-913 Lathe Stand Extension for 70-910, 70-920
70-908 16 inch Bed Extension for 70-1824
70-9083 Combo Kit Including: 70-908 16 inch Bed Extension For 70-1824 70-959 Tool Rest Height Extension, and 70-960 Tool Rest Extension
70-914 4 inch Tool Rest 1 inch Post
70-9158 5/8 inch x 1 inch Tool Rest Bushing NOW AVAILABLE
70-916 6 inch Tool Rest 1 inch  Post
70-918 8 inch Tool Rest 1 inch Post
70-920 Universal Stand for Mini and MIDI Lathes
70-924 4 inch Tool Rest 5/8 inch Post
70-926 6 inch Tool Rest 5/8 inch Post
70-928 8 inch Tool Rest 5/8 inch Post
70-933 3 inch Face Plate 1 x 8 TPI   
70-934 3-3/8 inch Face Plate 
70-936 6 inch Face Plate 1 x  8 TPI
70-940 Badger Spur Center
70-943 Spur Center MT2(Black)  
70-945 Live Center MT2 (Black)  
70-948 Center Point(Black) for 70-943
70-969 85mm (3-3/8) x 1 inch Post only for PRO tool rests
70-971 Mobility Caster Set for 70-3040 and 70-1824VSR
70-975 4 inch Top Only PRO Tool Rest
70-976 6 inch Top Only PRO Tool Rest
70-977 8 inch Top Only PRO Tool Rest
70-978 12 inch Top Only PRO Tool Rest
70-990 Nylon Washer 1-3/8 x 1-3/4  
70-992 Nylon Washer 1-3/64 x 1-5/8  
70-995 Mini lathe Drive Belt for 70-050, 050VS, 70-100
70-996 Premium Rubber Belt for 70-100/70-050/70-050VS  
70-997 Drive Belt for 70-220VSR
70-998 Drive Belt for 70-500  
70-999 Drive Belt for 70-425, 70-450 
80-902 Left Hand Tool Rest Flat
Woodworking Lathe Tools and Duplicators
easy wood tools
Easy Lathe Tools and Chucks

 

rikon 70-100 12 x 16 inch mini lathe

 

12 inch x 16 inch Mini Lathe 70-100 is a perennial favorite of beginning turners because of its simple design, but also for the sturdy construction that will last for years of reliable use. Six speed settings and indexing head give all of the RPM ranges needed for roughing billets, turning to final shape and then finishing projects on the machine. Headstock pulley guard tilts open for easy belt changes. Spindle rotates forward, only. Includes spur center, live center, 3” faceplate, tool rest, knock-out bar, wrenches and tool holder.

Features:

  • 12 inch swing / 16 inch between centers
  • 12 Position index head
  • Easy access speed change
  • Nylon face plate washer
  • Self ejecting tail stock
  • Ability to add multiple extensions
Specifications
Horsepower 3/4 HP TEFC
Amps 5.7
Volts 115V, 60 Hz
RPM 1,720 RPM
Direction Forward
Swing over bed 12 inch
Swing over tools rest base 9-1/2 inch
Working distance between centers 16 inch
Tool Rest Post Diameter 5/8 inch
Number of speeds 6
Speed range 430, 810, 1230, 1810, 2670, 3900
Spindle nose 1 inch x 8
Head stock / tailstock taper MT-2
Ram travel 2-1/2 inch
Indexing Positions 12
Lenght 32 inch
Height 17-1/2 inch
Width 10-1/2 inch
Net weight 89 lbs
Shipping Weight 92 lbs.
Base Size 27-3/4 x 7-3/4 inch
Bottom of base to spindle 13-1/2 inch (343mm)
Shipping Carton 33-3/4 inch x 12 inch x 11-1/2 inch
Warranty 5 Years

 

rikon 70-105 10 x 18 inch pen latherikon 70-105 10 x 18 inch pen lathe

Features:

  • 10 inch swing / 18 inch between centers
  • MT2 taper for pen mandrels
  • Easy access speed change
  • Nylon face plate washer
  • Self ejecting tail stock
  • Ability to add multiple extensions
Specifications
Horsepower 1/2 HP TEFC
Amps 3.7
Volts 120V, 60 Hz
Swing over bed 10 inch
Swing over tools rest base 7-1/4 inch
Working distance between centers 18 inch
Number of speeds 5
Speed range 500, 1175, 1850, 2225, 3200
Spindle nose 1 inch x 8
Head stock / tailstock taper MT-2
Ram travel 1-3/4 inch
Lenght 35-1/2 inch
Height 14-3/4 inch
Width 10-1/2 inch
Net weight 75 lbs

 

Model 70-1420VSR: 14″ x 20″ Midi VSR Lathe

Model 70-1420VSR: 14 inch x 20 inch Midi VSR Lathe

14 inch X 20 inch VARIABLE SPEED MIDI LATHE 70-1420VSR is the largest benchtop lathe in the RIKON line of machinery. This upgraded model gives woodturners increased spindle-to-bed height so that larger diameter work can be done. The addition of 3 machined surfaces to mount optional extensions increase the working dimensions even further.

Use the headstock’s outboard threaded spindle and optional 13-1/2 inch Extension (70-903) to add 4 inch of extra turning diameter capacity.
Mount this same extension to the front of the lathe bed, and with the remounted tool rest the outside edges or backs of bowls and platters can be safely turned. Lastly, the right bed end of the lathe is machined to attach the optional 13-1/2 inch or the longer 24 inch extension (70-904), for increasing the working distance from 20 inch to 44 inch for spindles.

Features:

  • Increased Spindle Height for creating greater diameter spindles, bowls and platters.
  • Lathe Bed Has Machined Ends and Front for Adding Extensions to Increase Turning Capabilities
  • Powerful 1-1/2 HP DC Motor
  • Magnets on Back of the Control Box Allow it to be Placed Anywhere Easily Accessible to Turners for Quick Controlling of the Lathe Speeds or Emergency Stopping.
  • Machined Bed and Matching Components give Precise Alignment
  • Ball-Bearing Construction for Smooth, Precise Spindle Operation
  • Adjustable Locking Handles Keep Components Positioned Securely
  • Pivoting Belt Cover for Easy Access when Changing Belt Speeds
  • 8 inch PRO Tool Rest Features Hardened Steel Top Rod to Provide Extra Control of Tools When Turning

 

Specifications 70-1420VSR
Motor Horsepower 1 1/2 HP TEFC
Motor Amps 13A.
Motor Volts 115V, 1 PH
Motor RPM 2,900 RPM
Direction Forward (C-Clockwise) and Reverse (Clockwise)
Number of Speeds 3
Speed Ranges 150-720 / 550-1,650 / 1,300-3,850 RPM
Swing Over Bed 14 inch (355.6 mm)
Swing Over Tool Rest 10-5/8 inch (268.732 mm)
Working Distance Between Centers 20 inch (508 mm)
Tool Rest Post Diameter 1 inch (25.4 mm)
Spindle Nose Inch x TPI 1-1/4 inch x 8 TPI
Headstock Taper MT2
Tailstock Taper MT2
Ram Travel 4 inch (101.6 mm)
Indexing Positions 24
Overall Length 43-3/8 inch (1101 mm)
Overall Width 17-3/8 inch (441 mm)
Overall Height 18-1/4 inch (463 mm)
Overall Base Size 36-3/4 inch x 8-3/8 inch (933.45 x 212. mm)
Overall Net Weight 137 lbs (62 kg)
Warranty 5 Years
Bottom of base to spindle 15-9/32 inch (388mm)

 

rikon Model 70-150VSR: 12″ x 16-1/2″ Midi VSR Lathe

 

12 inch x 16.5 inch Variable Speed Midi Lathe 70-150VSR is has been designed to offer features seen on larger industrial lathes. An ideal lathe for novice to professional turners. Designed with a powerful 1HP DC motor, electronic variable speed controls, a wide range of operating speeds, digital RPM readout, ample diameter and spindle length turning capacities in forward and reverse drives.

Corded control box has a magnetic back that allows it to be moved along the front of thecast iron lathe bed, and positioned where you want it for easiest access when turning. Left, outboard end of the lathe bed is milled to take a special 13-1/2 inch bed extension (70-903 sold separately) to allow outboard turning of diameters up to 15 inch . Lathe includes spur center, live center, 3 inch faceplate, 6 inch tool rest with 1 inch diameter post, knock-out bar, wrenches and tool holder.

Features:

  • Powerful 1HP DC Motor provides ample power for all turning needs
    • Electronic variable speed controls, wider range of operating speeds, digital RPM readout for forward and reverse rotation speeds.
    • Pivoting belt cover for easy access when changing belt speeds
    • Ball-bearing construction for smooth, precise spindle operation
    • Machined bed and matching components give precise alignment
    • Adjustable locking handles keep components positioned securely
    • 1” diameter tool rest post
    • Lathe bed has machined ends for adding extensions to increase spindle capacity
 
Motor
Horsepower 1 HP TEFC
Amps 6A. 60HZ
Volts 115V, 1 PH
RPM 3,200 RPM
Direction Forward (C-Clockwise) and Reverse (Clockwise)
 
Speeds
Number of Speeds 3
Ranges 250-850 / 430-1,450 / 950-3,200 RPM
 
Swing
Swing Over Bed 12 inch (305 mm)
Swing Over Tool Rest 9-1/4 inch (235 mm)
Working Distance Between Centers 16-1/2 inch (419 mm)
Tool Rest Post Diameter 1 inch (25.4 mm)
 
Headstock / Tailstock
Spindle Nose Inch x TPI 1 inch x 8 TPI
Headstock Taper MT2
Tailstock Taper MT2
Ram Travel 3-1/2 inch (90 mm)
Indexing Positions 24
 
Overall
Length 39 inch (991 mm)
Width 13-3/8 inch (340 mm)
Height 15-5/8 inch (397 mm)
Base Size 31-13/16 x 7-7/32 inch (808 x 183.5 mm)
Net Weight 95 lbs (43 kg)
Warranty 5 Years
Bottom of base to spindle 13-1/2 inch (343mm)

 

 18″ x 24″ VSR Lathe - 18″ x 24″ VSR2 Lathe

Model 70-1824VSR: 18 inch x 24 inch VSR Lathe

18 inch x 24 inch Variable Speed Lathe 70-1824VSR and VSR2 offer woodturners a variety of new features that make it the most versatile lathe in RIKON’s line –  V1 has a powerful 1.75HP, 115V, 16A motor gives ample power for all turning needs, while V2 offers a 2.5 HP, 230V motor. The lathe uses an inverter to control the motor’s operating efficiency, speed and regulates torque to give the craftsman the consistency needed when turning projects. Including a swivel headstock, spindle lock, spindle indexing, 3 bed extension positions, variable speeds from 50 to 3850 RPMs, digital read out display, moveable magnetic control box, 115V outlet for plugging in lights or other accessories, and increased tool storage.

Constructed of heavy cast iron, the bed, classically shaped legs, headstock, tailstock and tool rest assembly provide over 370 pounds of stability when turning. Plus, the large 1.75HP 115V motor gives the power and dependability needed for working on the largest bowls or oversized spindle projects. The newly designed headstock can swivel 180 degrees for outboard turning! This feature expands the bowl or platter diameters from 18 inch to 27-1/2 inch , or up to 44 inch if the headstock is secured facing forward (A freestanding tool rest is needed for this setup (not provided)).  Spindle turnings up to 24 inch in length can be done with the lathe, but with the addition of the optional 16 inch long #70-908 Bed Extension, turnings up to 40 inch are possible. The lathe has 3 additional machined surfaces on the sides of the bed to mount this special bed extension that increase the turning options even further.  Lathe includes spur center, live center, 3-3/8 inch faceplate, 12 inch tool rest with 1 inch diameter post, MT2-MT2 spindle alignment tool, knock-out bars, wrenches and tool holder.

Features:

  • Increased Spindle Height for creating greater diameter spindles, bowls and platters.
  • Lathe Bed Has Machined Ends and Front for Adding Extensions to Increase Turning Capabilities
  • Powerful 1.75 HP AC Motor
  • Magnets on Back of the Control Box Allow it to be Placed Anywhere Easily Accessible to Turners for Quick Controlling of the Lathe Speeds or Emergency Stopping.
  • Machined Bed and Matching Components give Precise Alignment
  • Ball-Bearing Construction for Smooth, Precise Spindle Operation
  • Adjustable Locking Handles Keep Components Positioned Securely
  • Pivoting Belt Cover for Easy Access when Changing Belt Speeds
  • 8 inch PRO Tool Rest Features Hardened Steel Top Rod to Provide Extra Control of Tools When Turning
Specifications
Motor Horsepower VSR1 - 1-3/4HP
Motor Amps VSR - 16A. 60HZ
Motor Volts VSR - 115V, 1 PH
Motor RPM 1,720 RPM
Direction Forward (C-Clockwise) and Reverse (Clockwise)
Number of Speeds 3
Speed Ranges 50-900/ 100-1,850 / 200-3,850 RPM
Swing Over Bed 18 inch (457 mm)
Swing Over Tool Rest 13-3/4 inch (350 mm)
Working Distance Between Centers 24 inch (610 mm)
Tool Rest Post Diameter 1 inch (25.4 mm)
Spindle Nose Inch x TPI 1-1/4 inch x 8 TPI
Headstock Taper MT2
Tailstock Taper MT2
Ram Travel 4 1/2 inch (101.6 mm)
Indexing Positions 24
Overall Length 63 inch (1600 mm)
Overall Width 24-3/8 inch (620 mm)
Overall Height 47-3/8 inch (1206 mm)
Overall Base Size 47-1/4 inch x 24-3/8 inch (1120 x 620 mm)
Overall Net Weight 373 lbs (169 kgs)
Warranty 5 Years
Bottom of base to spindle 43-5/16 inch (1100 mm)

 

18″ x 24″ VSR2 Lathe

Model 70-1824VSR2: 18 inch x 24 inch VSR2 Lathe

18 inch x 24 inch Variable Speed Lathe 70-1824 VSR2 offer woodturners a variety of new features that make it the most versatile lathe in RIKON’s line –  V2 offers a 2.5 HP, 230V motor. The lathe uses an inverter to control the motor’s operating efficiency, speed and regulates torque to give the craftsman the consistency needed when turning projects. Including a swivel headstock, spindle lock, spindle indexing, 3 bed extension positions, variable speeds from 50 to 3850 RPMs, digital read out display, moveable magnetic control box, 115V outlet for plugging in lights or other accessories, and increased tool storage.

Constructed of heavy cast iron, the bed, classically shaped legs, headstock, tailstock and tool rest assembly provide over 370 pounds of stability when turning. Plus, the large 2.5HP 230V motor gives the power and dependability needed for working on the largest bowls or oversized spindle projects. The newly designed headstock can swivel 180 degrees for outboard turning! This feature expands the bowl or platter diameters from 18 inch to 27-1/2 inch , or up to 44 inch if the headstock is secured facing forward (A freestanding tool rest is needed for this setup (not provided)).  Spindle turnings up to 24 inch in length can be done with the lathe, but with the addition of the optional 16 inch long #70-908 Bed Extension, turnings up to 40 inch are possible. The lathe has 3 additional machined surfaces on the sides of the bed to mount this special bed extension that increase the turning options even further.  Lathe includes spur center, live center, 3-3/8 inch faceplate, 12 inch tool rest with 1 inch diameter post, MT2-MT2 spindle alignment tool, knock-out bars, wrenches and tool holder.

Features:

  • Increased Spindle Height for creating greater diameter spindles, bowls and platters.
  • Lathe Bed Has Machined Ends and Front for Adding Extensions to Increase Turning Capabilities
  • Powerful 2.5 HP AC Motor
  • Magnets on Back of the Control Box Allow it to be Placed Anywhere Easily Accessible to Turners for Quick Controlling of the Lathe Speeds or Emergency Stopping.
  • Machined Bed and Matching Components give Precise Alignment
  • Ball-Bearing Construction for Smooth, Precise Spindle Operation
  • Adjustable Locking Handles Keep Components Positioned Securely
  • Pivoting Belt Cover for Easy Access when Changing Belt Speeds
  • 8 inch PRO Tool Rest Features Hardened Steel Top Rod to Provide Extra Control of Tools When Turning
Specifications
Motor Horsepower VSR2 - 2-1/2 HP, TEFC
Motor Amps VSR2 - 14 A, 50/60 Hz
Motor Volts VSR2 - 230 V, 3 Ph
Motor RPM 1,720 RPM
Direction Forward (C-Clockwise) and Reverse (Clockwise)
Number of Speeds 3
Speed Ranges 50-900/ 100-1,850 / 200-3,850 RPM
Swing Over Bed 18 inch (457 mm)
Swing Over Tool Rest 13-3/4 inch (350 mm)
Working Distance Between Centers 24 inch (610 mm)
Tool Rest Post Diameter 1 inch (25.4 mm)
Spindle Nose Inch x TPI 1-1/4 inch x 8 TPI
Headstock Taper MT2
Tailstock Taper MT2
Ram Travel 4 1/2 inch (101.6 mm)
Indexing Positions 24
Overall Length 63 inch (1600 mm)
Overall Width 24-3/8 inch (620 mm)
Overall Height 47-3/8 inch (1206 mm)
Overall Base Size 47-1/4 inch x 24-3/8 inch (1120 x 620 mm)
Overall Net Weight 373 lbs (169 kgs)
Warranty 5 Years
Bottom of base to spindle 43-5/16 inch (1100 mm)



 

Model 70-3040: 30†x 40†VSR Lathe with Sliding Bed

Model 70-3040: 30 inch x 40 inch VSR Lathe with Sliding Bed

RIKONs Heavy Duty 70-3040 Variable Speed Lathe features an innovative SLIDING BED that increases your turning capacity with just a turning of a switch! The special motorized upper bed effortlessly moves to the right

away from the headstock to double the standard between-centers distance from 20 inch to 40 inch! Moving the sliding bed also increases the swing from 23-7/32 inch to 31-1/4 inch over the lower bed! Ideal for turning large bowls or platters. This space-saving lathe is extra heavy-duty, made of solid cast iron and steel construction to provide professional turners with a robust machine that will take the stress when turning large diameter bowls or spindles. The 3HP TEFC, 220V motor combined with 4 heavy-duty bearings in the headstock and digital speed controls provide all the power and precision needed for this versatile lathe.

Features:

  • Motorized Sliding Bed  Increase spindle length 20 inch up to 40 inch
  • Motor and Switch  Beefy 3HP motor delivers ample power
  • Index Head  3-Step, multi-V pulleys include 36 index positions
  • Control Box  Magnetic back positions controls anywhere on long bed
  • LCD Speed Display  Big easy-to-read speeds from 20 to 3850 RPMs
  • Banjo  Cast iron tool rest base is extra wide and sturdy
Specifications
Motor Horsepower 3 HP TEFC
Motor Amps 14.8
Motor Volts 220V, 50/60 Hz
Motor RPM 1,720 RPM
Direction Forward/Reverse
Number of Speeds Variable
Speed Ranges 20 - 650 / 50 - 1,750 / 100 - 3,850
Swing Over Bed 23-7/32 inch to 31-1/4 inch
Swing Over Tool Rest 17-13/32 inch to 25-7/16 inch
Working Distance Between Centers 20 inch to 40 inch
Tool Rest Post Diameter 1 inch
Spindle Nose Inch x TPI 1-1/4 inch x 8
Headstock Taper MT2
Tailstock Taper MT2
Ram Travel 4-11/16 inch (120mm)
Indexing Positions 36
Overall Length 61-5/8 inch to 81-5/8 inch
Overall Width 30-1/8 inch
Overall Height 50-3/8 inch
Overall Net Weight 546 lbs.
Shipping Weight 665 lbs.
Warranty 5 Years
Shipping Carton 61-3/4 inch x 26-5/16 inch x 34-1/4 inch
Bottom of base to spindle 44 inch (1118mm)

 

Warranty

RIKON Power Tools Inc. (Seller) warrants to only the original retail consumer/ purchaser of our products that each product be free from defects in materials and workmanship for a period of five (5) years from the date the product was purchased at retail. This warranty may not be transferred.

This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear. Under no circumstances will Seller be liable for incidental or consequential damages resulting from defective products. All other warranties, expressed or implied, whether of merchantability, fitness for purpose, or otherwise are expressly disclaimed by Seller. This five-year warranty does not cover products used for commercial, industrial or educational purposes. The warranty term for these claims will be limited to a two-year period.

This limited warranty does not apply to accessory items such as blades, drill bits, sanding discs, grinding wheels, guide bearings or belts and other related items.

Seller shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special, or consequential damages arising from the use of our products.

To take advantage of this warranty proof of purchase documentation, which includes date of purchase and an explanation of the complaint, must be provided.

The Seller reserves the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.

To ensure you get the best service possible, please register your product online.

JET CHUCK SET (719900)

JET Lathe Chuck Set 1 inch x 8TPI

To compliment our extensive line of woodturning lathes, JET is introducing a nickel plated chuck with five unique sets of jaws, to keep projects securely on your lathe. Inside the custom JET molded case you will find: 1x Nickel Plated Chuck 1 inch X 8TPI 1x 190mm Nickel Plated Face Plate with 16 Grip studs 1x Nickel Plated Pin jaws (inside grip range 5-43mm, outside grip range 22-60mm) 1x #1 Round jaws (inside grip range 38-73mm, outside grip range 48-87mm) 1x #2 Round jaws (inside grip range 66-100mm, outside grip range 77-117mm) 1x Internal/external step jaws (inside grip range 8-43mm, outside grip range 20-78mm) 2x Woodworm screw (1/2 and 3/8 inch) 1x T-handle 1x 100mm Hex wrench The Jet Chuck Set (719900) fits JET models JWL-1015, JWL-1221, JWL1440, or any lathe with a 1 inch x 8TPI Spindle Thread. To fit to JET JWL-1640 and JWL-1840 (or any 1-1/4" spindle thread) use the JET Lathe Chuck Adaptor (719903).

Features:

  • Fits JET Lathe Models JWL-1015, JWL1221, JWL1440 and other models with a 1"x 8 TPI spindle thread.
  • Packed securely in a hard plastic JET case with EVA foam.
  • Chuck is nickel plated to deter rust
  • Includes 5 sets of interchangeable jaws with self centering chuck for varying tasks
  • Stainless steel T-Handle adjusts jaws concentrically
  • Weight 11 lbs

JET CHUCK SET (719900)
Inside the custom JET molded case you will find:

  • Nickel Plated Chuck 1 inch X 8TPI
  • 190mm Nickel Plated Face Plate with 16 Grip studs
  • Nickel Plated Pin jaws (inside grip range 5-43mm, outside grip range 22-60mm)
  • #1 Round jaws (inside grip range 38-73mm, outside grip range 48-87mm)
  • #2 Round jaws (inside grip range 66-100mm, outside grip range 77-117mm)
  • Internal/external step jaws (inside grip range 8-43mm, outside grip range 20-78mm)
  • Woodworm screws (1/2 and 3/8 inch)
  • T-handle and Hex wrench The JET Chuck Set (719900) fits JET models JWL-1015, JWL-1221, JWL1440, or any lathe with a 1inch x 8TPI Spindle Thread

 

JET Woodturning Carbide Chisels 6 Piece Set - (719901)

JET Woodturning Carbide Chisels 6 Piece Set - (719901)

To compliment our extensive line of woodturning lathes, JET is introducing the Woodturning Chisel Set. Inside the custom JET wooden case you will find: 1x 11 inch Anodized Aluminum Handle 1x 10.5 inch Anodized Aluminum Handle Extension 1x Stainless Steel Tool Shaft 1x 11mm Square Carbide Cutting Blade 1x 11mm Square-Arc Carbide Cutting Blade 1x 12mm Round Carbide Cutting Blade 1x 28mm Carbide Diamond Cutting Blade 1x Star Key 1x Hex Wrench

Features:

  • JET Carbide Turning Tool Set includes 4 interchangeable cutting blades: Square (11mm), Square Arc (11mm), Round (12mm), and Diamond (28mm).
  • Light weight extendable anodized aluminum handle. Main handle is 11 inch with a 10.5 inch extension.
  • JET Carbide Turning Tool Set is packed in a custom wood case.
  • Stainless steel shaft will not rust
  • Carbide blades have a long cutting life
     

JET Woodturning Carbide Hollowing Chisels Set 5PC

JET Woodturning Carbide Hollowing Chisels Set 5PC

To compliment our extensive line of woodturning lathes, JET is introducing the Woodturning Hollowing Chisel Set. Inside the custom JET wooden case you will find: 1x 11 inch Anodized Aluminum Handle 1x 10.5 inch Anodized Aluminum Handle Extension 3x Tool Shafts 3x 8.9mm Round Carbide Cutting Blades 1x Star Key 1x Hex Wrench

Features:

  • JET Carbide Hollowing Chisels Set includes 3 interchangeable radius for hollowing while works on the lathe
  • Light weight extendable anodized aluminum handle. Main handle is 11 inch with a 10.5 inch extension.
  • JET Carbide Turning Tool Set is packed in a custom wood case.
  • Stainless steel shaft will not rust
  • Carbide blades have a long cutting life
Jet Chuck and Turning Tools
719900 JET Lathe Chuck
719901 JET Wood Turning Chisel Set
719902 JET Wood Turning Hollowing Chisel Set
719903 1 inch x 8TPI to 1-1/4 inch x 8TPI adaptor
719951 11mm Sq Carbide Insert 2PC
719952 11mm Sq Arc Carbide Insert 2PC
719953 12mm Round Carbide Insert 2PC
719954 28mm Diamond Carbide Insert 2PC
719955 8.9mm Round Carbide Insert 2PC

 

NEW! PRO-TEK SERIES CHUCKS & JAWS

Click here to download Pro-Tek G3 Manual

Click here to download Pro-Tek Supernova 2 Manual

NEW! PRO-TEK SERIES CHUCKS and JAWS

From the inNOVAtors of the original woodturning chuck comes the next generation of chucks – the NEW! PRO-TEK Series self centering chucks and jaws deliver the next generation of inNOVAtion in woodturning. The powerful gearing grip delivers tremendous slide holding power offering solid, vibration free performance, each and every time you turn. The PRO-TEK series of chucks are compatible with the same accessory range as other NOVA Chucks, and feature premium upgrades including:

  • Premium rust resistant nickel plating, ideal for turning green wood.
  • Stronger and more versatile 50mm/2 inch NEW! PRO-TEK Jaws with an improved dovetail AND serrated profile for maximum control. The
  • unique woodworking dovetail profile pulls the project into the chuck and holds round and square blanks firmly.
  • Upgraded 6 point star fasteners exerting more torque with ease, offering better holding power and minimizing strip out for longer life.
  • Jaw fastening wrench upgraded to T-bar handle (from hex wrench) for reduced stripping; and enabling quicker tightening of screws
  • which are easier on hands.
  • Intuitive clockwise scroll rotation for ease of use.
  • CNC precision machined for unparalleled tolerances and accuracy.
  • Fully sealed indexing backing plate reinforced with stranded glass fibers for extreme durability that protects the internal gearing from
  • moisture and debris creating low maintenance and ensuring a longer life. (PRO-TEK SUPERNOVA2 ONLY)
  • Stand out NOVA RED backing plate adds an additional safety measure for use in operation. (PRO-TEK SUPERNOVA2 ONLY)
  • Powerful geared grip delivers tremendous slide holding power.
  • Self-lubricating copper-infused precision-cast jaw slides for effortless movement and resistance to wear and tear.
  • Single-handed operation offers fast and convenient mounting for your project: quicker setup equals more time to turn.
  • Captured pinion and ball nose hex wrench with large, easy grip handle allows unique tilt-away action especially handy when working
  • with larger workpieces.
  • Rotation arrow for easy reference and fast opening and closing action.
  • Auto safety stop feature to keep Jaw slides from protruding past the chuck body.
  • Jaw mounting profile is cross-compatible with all NOVA chucks.
  • NOVA’s Spindle Adaptor system  fit your NOVA Insert chuck to various lathe spindle threads.
  • Safe Lock woodworm screw included for fast mounting of rough material.
  • FREE! NOVA microfiber workshop towel (11.5 x 10.5 inch) to help keep your chuck and jaws well maintained.
  • 6 Year Full Replacement Warranty  Best in Market!

PRO-TEK G3 CHUCK and JAWS SPECIFICATIONS

  • Chuck recommended for 10 to 16 inch lathes. Diameter 88.5mm/3.45 inch, height 44mm/1.72 inch.
  • PRO-TEK Jaws (50mm/2 inch) included best for projects up to 310mm/12 inch bowl and up to 150mm/6 inch length spigots.
  • Insert chucks require an insert (sold separately).

PRO-TEK SUPERNOVA2 CHUCK and JAWS SPECIFICATIONS

  • Recommended for lathes from 350mm/14 inch to 508mm/20 inch diameter swing. Diameter 98.5mm/3.84 inch, height 48mm/1.87 inch
  • PRO-TEK Jaws (50mm/2 inch) for projects up to 310mm/12 inch bowl and up to 150mm/6 inch length spigots.
  • 24 Division Index built into the backing plate design.
  • Insert chucks require an insert (sold separately).

ALL PRO-TEK BUNDLES INCLUDE:

  • PRO-TEK 50mm Jaws
  • Woodworm Screw
  • T-Bar Chuck Key
  • 6 Point Star Fasteners (8) and T Handle Wrench
  • Fibre Washers and Allen Wrench
  • Set Screw
  • BONUS NOVA Microfiber Workshop Towel
  • NOVA Chuck and Jaw Hard Storage Case

 

Chucks Require Seperate Insert for Final Insulation

Pro-Tek Series
48290 NOVA PRO-TEK G3 INSERT THREAD CHUCK and JAWS   
48291 NOVA PRO-TEK G3 DIRECT THREAD 1 inch x 8TPI REVERSIBLE CHUCK and JAWS
48293 NOVA PRO-TEK G3 DIRECT THREAD 1 inch x 8TPI REVERSIBLE CHUCK BUNDLE
23108 NOVA PRO-TEK SUPERNOVA2 INSERT CHUCK BUNDLE
23262 NOVA PRO-TEK SUPERNOVA2 INSERT CHUCK and JAWS

Chucks Require Seperate Insert for Final Insulation

 

Chucks Require Seperate Insert for Final Insulation

Teknatool Wood Turning Lathe Chuck Inserts
I3NS Inset Nova M20 x 1.5 RH
I6NS Insert Nova 3/4" Plain Bore
I7NS Insert Nova 1 1/8" 8 TPI UNC RH
I8NS Insert Nova 7/8" 12 TPI UN LH
I9NS Insert Nova 3/4" 16 TPI UNF RH
IANS Insert Nova 3/4" 14 TPI RH
IBNS Insert Nova 3/4" 14 TPI LH
ICNS insert Nova 1" 10 TPI RH
IDNS Insert Nova 1"  8 TPI RH
IENS Insert Nova 1" 12 TPI RH
IHNS Insert Nova 3/4" 10 TPI BSW
IINS Inset Nova M24 x 3 RH
IJNS Insert Nova 1 1/8" 12 TPI RH
IKNS Insert Nova M18 x 2.5 RH
ILNS Insert Nova 1 1/4"  8 TPI UNS
IMNS Insert Nova 1" 10 TPI LH
INNS Insert Nova Blank
IONS Insert Nova 1 1/8" 7 TPI RH
IQMS Insert Nova M30 x 3.5 RH
ISNS Insert Nova SHOPSMITH 5/8" Plain Bore
ITNS Insert Nova 1" 8 TPI RH & LH
IUNS Insert Nova 1 1/8"  12TPI UNF RH
IVNS Insert Nova 7/8" 14 TPI RH
IWNS Insert Nova M25 x 2 RH
IXNS Insert Nova 1" 8 TPI RH  
IYNS Insert Nova 1 1/4" 8 TPI UNS RH 
Teknatool Wood Turning Lathe Chuck Jaws
JS25N 25mm Jaws
JS50N 50mm Jaws
JS75DT 75mm Step Jaws
JS100N 100mm Jaws
JS-SP35 35mm Spigot Jaws
JS-SP45 45mm Spigot Jaws
JSPIN Pin Jaws
JSCOLE Cole Jaws
6006 Mini Cole Jaws
6017 Long Nose Jaws
6014 Bowl Jaws 75mm
6019 Bowl Jaws 35mm
JS130N 130mm Jumbo Jaws
PJSN PowerGrip Jaws
6021 Soft Jaws
JS20N 20mm Mini Jaw
JS70N 70mm Mini Jaw
6025 Mini Step Jaw
6026 Mini Spigot Jaw
6027 4 Piece Jaw Set
6034 Nova Pen Plus Jaws
Teknatool Wood Turning Lathe Chuck Accessories
23079 Nova Universal Spanner Wrench
10051 10 in 1 Chuck Gage
6008 Dovetail Chisel
10006 Woodworm Screw
NSFK Nova Chuck Spares Kit
SSK Spare Jaws Screw Kit
WWCJ Cole Jaw Woodworm Screw
CJFK Cole jaw Fastening Kit
NCSC Nova Chuck Spu Center
6000 Faceplate Ring 50mm
6001 Faceplate Ring 100mm
6002 Faceplate Ring 130mm
6030 Cole Jaw Buffer Kit

 

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other type of tool on the market. Designed to be kept flat on the tool rest and level to the floor, the Easy Rougher will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening. The tool design provides support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to take the pounding that you would normally suffer through when using a conventional bowl gouge for roughing. No more white knuckling a bowl gouge.

  • Cuts left, right and straight in without changing approach angle
  • Truly deeper cuts up to 1 inch off the diameter in one pass with the Full Size Rougher.
  • Requires very little physical strength or exertion
  • Your feet and hips stay in nearly the same position for the blank roughing process.
  • Very minimal handle bouncing on irregular shaped blanks
  • Reduced kick-back or sucking into work piece
  • Available Chip Deflector keeps most projectiles away from the face and neck
  • No intimidating cutting angles to learn and remember
  • No bevels to ride
  • No fear of a dangerous catch

Easy Finisher - Yet Another Innovation in Woodturning

Ci1 DetailWith another step forward in woodturning innovation, Easy Wood Tools now offers you a tool to take up where the Easy Rougher leaves off. The Easy Finisher has a round carbide cutter perfect for doing the inside work on smaller bowls and for larger coves on spindle work. Our carbide inserts are made in the USA and we are pleased to offer you a tool that is 100 percent made in America.

If you own one of our existing Easy Roughers, you well know by now that we deliver even more than we advertise, as hard as is was for you to believe before your first purchase. I assure you the productivity of this tool will exceed your highest expectations. You just can not predict the possibilities or joy this tool will provide you. In testing the prototypes for this new design, I found myself creating forms that were never even on my list to try because the dangers and complications of existing tools were just not worth the trouble.  Craig Jackson, Founder

Like the other Easy tools, the Easy Finishers are designed to be used with the tool rest set so that when the tool is held level the top of the cutter is on center. Then just keep it level to the floor and flat on the tool rest for all types of cuts... it does not get any easier than that. There are no complicated approach angles, or bevels to ride. The design of this tool allows the Easy Finisher to effortlessly cut from the center of a bowl out to the rim OR from the rim to the center! All without changing any angles whatsoever. You just stand in one spot and cut coming and going until you get to the shape you want.

The Easy Finisher utilizes the same carbide cutter technology as the Easy Rougher that reduces strain and fatigue, improves productivity, and virtually eliminates sharpening. It comes loaded with one round cutter and when it gets dull, you just rotate the cutter for a fresh cut. Please note: The round cutters are not interchangeable with the carbide cutters on the Easy Rougher tool bars.

When the cutter eventually gets dull, just loosen the retaining screw and rotate cutter about 1/4 of a turn, then re-tighten the screw.

We promise this tool will open up a whole new level of design possibilities for your craft and it will exceed your expectations. If not, return for a complete refund.

Replacement carbide cutter number is engraved right on the tool bar.

Available in four sizes - Mini, Mid-Size, Full-Size and Pro. See purchase page for all products, sizes and accessories.

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Detailer tools really pick up where other tools leave off and provide another level of woodturning creativity as the unique diamond cutter shape fits in tight places where the cutters on the other tools will just not fit.

These tools were designed for the primary purpose of doing the small intricate work and cutting final details on your projects such as small coves and beads on both spindle and bowl work. They are also very handy for cutting chuck tenons and making inside reverse angle cuts for inside chucking bowls with dovetail jaws. You may find they work well for hogging your green wood projects too.

The Easy Detailers are engineered to cut going straight in employing just the nose of the tool.

The Easy Detailer tools are engineered with a reduced relief angle to the long cuttings edges making the long edges less aggressive when held in contact with the wood as the nose of the tool is cutting. In use, the long edge is intended to perform as a "control surface" and serve to be in contact with the wood just behind the cut; much like a bevel is being rubbed.

For safety reasons, avoid plunging the tool so deep into the work at once to the depth you would have both sides of the cutter in contact with the wood too greatly at the same time. This could cause too much force at once and lead to binding of the tool in the groove.

Each diamond-shaped Easy Detailer cutter is engineered to fit all size Detailer tools in our current product line. When the cutter eventually dulls, just loosen the retaining screw and rotate cutter, then re-tighten the screw.

Replacement carbide cutter number is engraved right on the tool bar.
Available in four sizes - see purchase page for all products, sizes and accessories.

PART NUMBER DESCRIPTION
2200 MID-SIZE EASY ROUGHER
3200 PRO EASY ROUGHER
6300 MID-SIZE EASY FINISHER
3400 PRO EASY FINISHER
7300 MID-SIZE EASY DETAILER
3700 PRO EASY DETAILER

 

70-100
12 X 16 MINI LATHE, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT92PRICE
Mfg. item #: 70-100
RIK70-100
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$566.99

224
70-105
10 X 18 MINI LATHE 1/2 HP, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT80PRICE
Mfg. item #: 70-105
RIK70-105
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$429.99

224
70-150VSR
12 X 16 VSR MIDI LATHE, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT103PRICE
Mfg. item #: 70-150VSR
RIK70-150VSR
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$809.99

224
70-1420VSR
14 X 20 VSR MIDI LATHE, 1.5HP
SHIPS LTL TRUCK FREIGHT, CALL 800-458-3687 X1 FOR THE BEST BROTHER-IN-LAW DEAL ON THIS RIKON PRODUCT ANYWHERE: SHIPPING WGT = 146 LBS
Mfg. item #: 70-1420VSR
RIK70-1420VSR
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,169.99

224
70-1824VSR
18 X 24 1.75 HP 115V VSR LATHE
SHIPS LTL TRUCK FREIGHT, CALL 800-458-3687 X1 FOR THE BEST BROTHER-IN-LAW DEAL ON THIS RIKON PRODUCT ANYWHERE: SHIPPING WGT = 463 LBS
Mfg. item #: 70-1824VSR
RIK70-1824VSR
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$2,699.99

224
70-1824VSR2
18 X 24 2.5 HP 220V VSR LATHE
SHIPS LTL TRUCK FREIGHT, CALL 800-458-3687 X1 FOR THE BEST BROTHER-IN-LAW DEAL ON THIS RIKON PRODUCT ANYWHERE: SHIPPING WGT = 463 LBS
Mfg. item #: 70-1824VSR2
RIK70-1824VSR2
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$2,699.99

224
70-3040
30 X 40 VSR LATHE WITH SLIDING BED
SHIPS LTL TRUCK FREIGHT, CALL 800-458-3687 X1 FOR THE BEST BROTHER-IN-LAW DEAL ON THIS RIKON PRODUCT ANYWHERE: SHIPPING WGT = 573 LBS
Mfg. item #: 70-3040
RIK70-3040
lease to own for as little as:$85 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,499.99

224
70-800
4 PC TURNING SYSTEM WITH CARBIDE INSERTS, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT7PRICE
Mfg. item #: 70-800
RIK70-800
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$179.99

224
70-900B
MINI LATHE EXTENSION BED FOR 70-100 BLUE, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT30PRICE
Mfg. item #: 70-900B
RIK70-900B
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$134.04

224
70-920
UNIVERSAL STAND FOR MINI AND MIDI LATHES, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT50PRICE
Mfg. item #: 70-920
RIK70-920
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$170.59

224
70-912
12 TOOL REST 1 INCH POST , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT2.82PRICE
Mfg. item #: 70-912
RIK70-912
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$37.50

224
70-913
LATHE STAND EXTENSION FOR 70-910, 70-920, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT30PRICE
Mfg. item #: 70-913
RIK70-913
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$102.35

224
70-908
16 BED EXTENSION FOR RIKON 1824VSR LATHE, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT24PRICE
Mfg. item #: 70-908
RIK70-908
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
NEW ITEM
$158.41

224
70-9083
3 PC EXTENSION KIT, (70-908, 70-959, 70-960) FOR RIKON 1824VSR LATHE, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT29PRICE
Mfg. item #: 70-9083
RIK70-9083
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
NEW ITEM
$213.24

224
70-914
4 TOOL REST 1 POST , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT1.54PRICE
Mfg. item #: 70-914
RIK70-914
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$19.99

224
70-9158
5/8 X 1 TOOL REST BUSHING , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT0.21PRICE
Mfg. item #: 70-9158
RIK70-9158
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$12.99

224
70-916
6 TOOL REST 1 INCH POST , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT2PRICE
Mfg. item #: 70-916
RIK70-916
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$29.99

224
70-918
8 TOOL REST 1 INCH POST, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT2.3PRICE
Mfg. item #: 70-918
RIK70-918
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$27.50

224
70-924
4 TOOL REST 5/8 POST, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT1PRICE
Mfg. item #: 70-924
RIK70-924
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$16.99

224
70-926
6 TOOL REST 5/8 POST, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT2PRICE
Mfg. item #: 70-926
RIK70-926
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$22.99

224
70-928
8 TOOL REST 5/8 POST, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT2.5PRICE
Mfg. item #: 70-928
RIK70-928
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$26.25

224
70-933
3 FACE PLATE 1 X 8 TPI , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT2PRICE
Mfg. item #: 70-933
RIK70-933
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$16.99

224
70-934
3-3/8 FACE PLATE , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT2PRICE
Mfg. item #: 70-934
RIK70-934
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$19.99

224
70-936
6 FACE PLATE 1 X 8 TPI, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT2PRICE
Mfg. item #: 70-936
RIK70-936
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$25.99

224
70-940
BADGER SPUR CENTER, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT2PRICE
Mfg. item #: 70-940
RIK70-940
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$56.25

224
70-943
SPUR CENTER MT2(BLACK) , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT2PRICE
Mfg. item #: 70-943
RIK70-943
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$14.99

224
70-945
LIVE CENTER MT2 (BLACK) , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT2PRICE
Mfg. item #: 70-945
RIK70-945
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$19.99

224
70-948
CENTER POINT(BLACK) FOR 70-943 , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT0.06PRICE
Mfg. item #: 70-948
RIK70-948
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$5.99

224
70-969
85MM (3-3/8) X 1 POST ONLY FOR PRO TOOL RESTS, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT1.25PRICE
Mfg. item #: 70-969
RIK70-969
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$9.99

224
70-971
MOBILITY CASTER SET FOR 70-3040, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT39PRICE
Mfg. item #: 70-971
RIK70-971
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$230.30

224
70-975
4" TOP ONLY PRO TOOL REST, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT1PRICE
Mfg. item #: 70-975
RIK70-975
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$24.99

224
70-976
6" TOP ONLY PRO TOOL REST, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT1PRICE
Mfg. item #: 70-976
RIK70-976
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$29.99

224
70-977
8" TOP ONLY PRO TOOL REST, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT1.5PRICE
Mfg. item #: 70-977
RIK70-977
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$26.25

224
70-978
12" TOP ONLY PRO TOOL REST, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT2.5PRICE
Mfg. item #: 70-978
RIK70-978
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$30.00

224
70-990
NYLON WASHER 1-3/8 X 1-3/4 , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT0.06PRICE
Mfg. item #: 70-990
RIK70-990
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$5.99

224
70-992
NYLON WASHER 1-3/64 X 1-5/8 , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT0.06PRICE
Mfg. item #: 70-992
RIK70-992
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$5.99

224
70-995
MINI LATHE DRIVE BELT FOR 70-050, 050VS, 70-100 , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT0.1PRICE
Mfg. item #: 70-995
RIK70-995
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$17.99

224
70-996
PREMIUM RUBBER BELT FOR 70-100/70-050/70-050VS , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT0.1PRICE
Mfg. item #: 70-996
RIK70-996
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$21.99

224
70-997
DRIVE BELT FOR 70-220VSR, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT0.1PRICE
Mfg. item #: 70-997
RIK70-997
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$19.99

224
70-998
DRIVE BELT FOR 70-500 , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT0.12PRICE
Mfg. item #: 70-998
RIK70-998
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$26.25

224
70-999
DRIVE BELT FOR 70-425, 70-450 , SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT0.12PRICE
Mfg. item #: 70-999
RIK70-999
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$24.99

224
80-902
LEFT HAND TOOL REST FLAT, SHIPS GROUND UPS/FEDEX OR SHIPS FREE WITH ANY LTL FREIGHT TRUCK ITEM.SHIP WGT1PRICE
Mfg. item #: 80-902
RIK80-902
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$9.99

224
JT9-719900
CALL NOW 800-458-3687 FOR EXPERT ADVISE
JET LATHE CHUCK
OR ADD TO CART FOR YOUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS JET ITEM, LIMITED QUANTITY AVAILABLE
Mfg. item #: JT9-719900
WMH719900
ADD TO CART To See Freight Charges, if any. All TRUCK FREIGHT Deliveries Include Residential, Lift-gate & Call Ahead Services at No Extra Charge.1052
$360.99

5
JT9-719901
CALL NOW 800-458-3687 FOR EXPERT ADVISE
JET WOOD TURNING CHISEL SET
OR ADD TO CART FOR YOUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS JET ITEM, LIMITED QUANTITY AVAILABLE
Mfg. item #: JT9-719901
WMH719901
ADD TO CART To See Freight Charges, if any. All TRUCK FREIGHT Deliveries Include Residential, Lift-gate & Call Ahead Services at No Extra Charge.1052
$204.99

5
JT9-719902
CALL NOW 800-458-3687 FOR EXPERT ADVISE
JET WOOD TURNING HOLLOWING CHISEL SET
OR ADD TO CART FOR YOUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS JET ITEM, LIMITED QUANTITY AVAILABLE
Mfg. item #: JT9-719902
WMH719902
ADD TO CART To See Freight Charges, if any. All TRUCK FREIGHT Deliveries Include Residential, Lift-gate & Call Ahead Services at No Extra Charge.1052
$211.99

5
JT9-719903
CALL NOW 800-458-3687 FOR EXPERT ADVISE
1"X8TPI TO 1-1/4"X8TPI ADAPTOR
OR ADD TO CART FOR YOUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS JET ITEM, LIMITED QUANTITY AVAILABLE
Mfg. item #: JT9-719903
WMH719903
ADD TO CART To See Freight Charges, if any. All TRUCK FREIGHT Deliveries Include Residential, Lift-gate & Call Ahead Services at No Extra Charge.1052
$30.99

5
JT9-719951
CALL NOW 800-458-3687 FOR EXPERT ADVISE
11MM SQ CARBIDE INSERT 2PC
OR ADD TO CART FOR YOUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS JET ITEM, LIMITED QUANTITY AVAILABLE
Mfg. item #: JT9-719951
WMH719951
ADD TO CART To See Freight Charges, if any. All TRUCK FREIGHT Deliveries Include Residential, Lift-gate & Call Ahead Services at No Extra Charge.1052
$41.99

5
JT9-719952
CALL NOW 800-458-3687 FOR EXPERT ADVISE
11MM SQ ARC CARBIDE INSERT 2PC
OR ADD TO CART FOR YOUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS JET ITEM, LIMITED QUANTITY AVAILABLE
Mfg. item #: JT9-719952
WMH719952
ADD TO CART To See Freight Charges, if any. All TRUCK FREIGHT Deliveries Include Residential, Lift-gate & Call Ahead Services at No Extra Charge.1052
$42.99

5
JT9-719953
CALL NOW 800-458-3687 FOR EXPERT ADVISE
12MM ROUND CARBIDE INSERT 2PC
OR ADD TO CART FOR YOUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS JET ITEM, LIMITED QUANTITY AVAILABLE
Mfg. item #: JT9-719953
WMH719953
ADD TO CART To See Freight Charges, if any. All TRUCK FREIGHT Deliveries Include Residential, Lift-gate & Call Ahead Services at No Extra Charge.1052
$42.99

5
JT9-719954
CALL NOW 800-458-3687 FOR EXPERT ADVISE
28MM DIAMOND CARBIDE INSERT 2PC
OR ADD TO CART FOR YOUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS JET ITEM, LIMITED QUANTITY AVAILABLE
Mfg. item #: JT9-719954
WMH719954
ADD TO CART To See Freight Charges, if any. All TRUCK FREIGHT Deliveries Include Residential, Lift-gate & Call Ahead Services at No Extra Charge.1052
$42.99

5
JT9-719955
CALL NOW 800-458-3687 FOR EXPERT ADVISE
8.9MM ROUND CARBIDE INSERT 2PC
OR ADD TO CART FOR YOUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS JET ITEM, LIMITED QUANTITY AVAILABLE
Mfg. item #: JT9-719955
WMH719955
ADD TO CART To See Freight Charges, if any. All TRUCK FREIGHT Deliveries Include Residential, Lift-gate & Call Ahead Services at No Extra Charge.1052
$42.99

5
48290
PRO-TEK G3 CHUCK INSERT VERSION
Mfg. item #: 48290
TEK48290
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$139.99

36
48291
PRO-TEK G3 CHUCK DIRECT THREAD VERSION 1 - 8 TPI
Mfg. item #: 48291
TEK48291
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$139.99

36
48293
PRO-TEK G3 BUNDLE (INCLUDES 48291, JS100N, JSPIN)
Mfg. item #: 48293
TEK48293
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$189.99

36561
23108
SN2 PRO-TEK BUNDLE (INCLUDES 23262 INSERT CHUCK, JS100N, JS130N)
Mfg. item #: 23108
TEK23108
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$219.99

36
23262
PRO-TEK SN2 CHUCK INSERT VERSION
Mfg. item #: 23262
TEK23262
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$179.99

36
I3NS
INSET NOVA M20 X 1.5 RH
Mfg. item #: I3NS
TEKI3NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
I6NS
INSERT NOVA 3/4 PLAIN BORE
Mfg. item #: I6NS
TEKI6NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
I7NS
INSERT NOVA 1 1/8 8 TPI UNC RH
Mfg. item #: I7NS
TEKI7NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
I8NS
INSERT NOVA 7/8 12 TPI UN LH
Mfg. item #: I8NS
TEKI8NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
I9NS
INSERT NOVA 3/4 16 TPI UNF RH
Mfg. item #: I9NS
TEKI9NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
IANS
INSERT NOVA 3/4 4 TPI RH
Mfg. item #: IANS
TEKIANS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

36
IBNS
INSERT NOVA 3/4 4 TPI LH
Mfg. item #: IBNS
TEKIBNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

36
ICNS
INSERT NOVA 1 10 TPI RH
Mfg. item #: ICNS
TEKICNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
IDNS
INSERT NOVA 1 8 TPI RH
Mfg. item #: IDNS
TEKIDNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$24.99

36
IENS
INSERT NOVA 1 12 TPI RH
Mfg. item #: IENS
TEKIENS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
IHNS
INSERT NOVA 3/4 10 TPI BSW
Mfg. item #: IHNS
TEKIHNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
IINS
INSET NOVA M24 X 3 RH
Mfg. item #: IINS
TEKIINS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
IJNS
INSERT NOVA 1 1/8 12 TPI RH
Mfg. item #: IJNS
TEKIJNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
IKNS
INSERT NOVA M18 X 2.5 RH
Mfg. item #: IKNS
TEKIKNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
ILNS
INSERT NOVA 1 1/4 8 TPI UNS
Mfg. item #: ILNS
TEKILNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$24.99

36
IMNS
INSERT NOVA 1 10 TPI LH
Mfg. item #: IMNS
TEKIMNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
INNS
INSERT NOVA BLANK
Mfg. item #: INNS
TEKINNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
IONS
INSERT NOVA 1 1/8 7 TPI RH
Mfg. item #: IONS
TEKIONS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
IQMS
INSERT NOVA M30 X 3.5 RH
Mfg. item #: IQMS
TEKIQMS
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

36
ISNS
INSERT NOVA SHOPSMITH 5/8 PLAIN BORE
Mfg. item #: ISNS
TEKISNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
ITNS
INSERT NOVA 1 8 TPI RH & LH
Mfg. item #: ITNS
TEKITNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
IUNS
INSERT NOVA 1 1/8 12TPI UNF RH
Mfg. item #: IUNS
TEKIUNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
IVNS
INSERT NOVA 7/8 14 TPI RH
Mfg. item #: IVNS
TEKIVNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
IWNS
INSERT NOVA M25 X 2 RH
Mfg. item #: IWNS
TEKIWNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$29.99

36
IXNS
INSERT NOVA 1 8 TPI RH W/SET SCREW FOR REV.
Mfg. item #: IXNS
TEKIXNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$24.99

36
IYNS
INSERT NOVA 1 1/4 8 TPI UNS RH ** INACTIVE: REPLACED BY TEKILNS
Mfg. item #: IYNS
TEKIYNS
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

36
JS25N
25MM JAWS
Mfg. item #: JS25N
TEKJS25N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$59.99

36561
JS50N
50MM JAWS
Mfg. item #: JS50N
TEKJS50N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$59.99

36561
JS75DT
75MM STEP JAWS
Mfg. item #: JS75DT
TEKJS75DT
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$74.99

36561
JS100N
100MM JAWS
Mfg. item #: JS100N
TEKJS100N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$64.99

36
JS-SP35
35MM SPIGOT JAWS
Mfg. item #: JS-SP35
TEKJS-SP35
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$59.99

36
JS-SP45
45MM SPIGOT JAWS
Mfg. item #: JS-SP45
TEKJS-SP45
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$79.99

36
JSPIN
PIN JAWS
Mfg. item #: JSPIN
TEKJSPIN
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$59.99

36
JSCOLE
COLE JAWS
Mfg. item #: JSCOLE
TEKJSCOLE
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$69.99

36
6006
MINI COLE JAWS
Mfg. item #: 6006
TEK6006
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$74.99

36
6017
LONG NOSE JAWS
Mfg. item #: 6017
TEK6017
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$74.99

36
6014
BOWL JAWS 75MM
Mfg. item #: 6014
TEK6014
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$74.99

36
6019
BOWL JAWS 35MM
Mfg. item #: 6019
TEK6019
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$49.99

36
JS130N
130MM JUMBO JAWS
Mfg. item #: JS130N
TEKJS130N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$74.99

36
PJSN
POWERGRIP JAWS
Mfg. item #: PJSN
TEKPJSN
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$89.99

36
6021
SOFT JAWS
Mfg. item #: 6021
TEK6021
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$19.99

36
JS20N
20MM MINI JAW
Mfg. item #: JS20N
TEKJS20N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$39.99

36
JS70N
70MM MINI JAW
Mfg. item #: JS70N
TEKJS70N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$49.99

36
6025
MINI STEP JAW
Mfg. item #: 6025
TEK6025
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$49.99

36
6026
MINI SPIGOT JAW
Mfg. item #: 6026
TEK6026
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$49.99

36
6027
4 PIECE JAW SET
Mfg. item #: 6027
TEK6027
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$179.99

36
6034
NOVA PEN PLUS JAWS
Mfg. item #: 6034
TEK6034
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$44.99

36
23079
NOVA UNIVERSAL SPANNER WRENCH
Mfg. item #: 23079
TEK23079
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$31.99

36
10051
10 IN 1 CHUCK GAGE
Mfg. item #: 10051
TEK10051
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$24.99

36
6008
DOVETAIL CHISEL
Mfg. item #: 6008
TEK6008
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$65.99

36
10006
WOODWORM SCREW
Mfg. item #: 10006
TEK10006
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$24.99

36
NSFK
NOVA CHUCK SPARES KIT
Mfg. item #: NSFK
TEKNSFK
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$19.99

36
SSK
SPARE JAWS SCREW KIT
Mfg. item #: SSK
TEKSSK
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$7.99

36
WWCJ
COLE JAW WOODWORM SCREW
Mfg. item #: WWCJ
TEKWWCJ
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$32.99

36
CJFK
COLE JAW FASTENING KIT
Mfg. item #: CJFK
TEKCJFK
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$27.99

36
NCSC
NOVA CHUCK SPU CENTER
Mfg. item #: NCSC
TEKNCSC
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$32.99

36
6000
FACEPLATE RING 50MM
Mfg. item #: 6000
TEK6000
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$35.99

36
6001
FACEPLATE RING 100MM
Mfg. item #: 6001
TEK6001
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$54.99

36
6002
FACEPLATE RING 130MM
Mfg. item #: 6002
TEK6002
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$79.99

36
6030
COLE JAW BUFFER KIT
Mfg. item #: 6030
TEK6030
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$32.99

36
2200
REPLACEMENT CUTTER OPTION: CI2-R2 AND CI2-R2NR
Mfg. item #: 2200
EASY2200
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

1080
3200
REPLACEMENT CUTTER OPTIONS: CI1-SQ, CI1-R2 AND CI1-R2-NR
Mfg. item #: 3200
EASY3200
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.99

1080
6300
MID-SIZE EASY FINISHER REPLACEMENT CUTTER OPTION: CI3NR
Mfg. item #: 6300
EASY6300
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

1080
3400
PRO EASY FINISHER REPLACEMENT CUTTER OPTIONS: CI0-NR
Mfg. item #: 3400
EASY3400
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.99

1080
7300
MID-SIZE EASY DETAILER REPLACEMENT CUTTER OPTION: CI4-NR
Mfg. item #: 7300
EASY7300
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

1080
3700
PRO EASY DETAILERREPLACEMENT CUTTER OPTION: CI4-NR
Mfg. item #: 3700
EASY3700
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.99

1080
Copyright © 2024 Smith-Hamilton, Inc
0.085 240626 12:46