Technical Sales 1–800–458–3687

Sawstop 10 inch Industrial Cabinet Saw

Call 1-800-458-3687 For Additonal Information on the SawStop Industrial Table Saws

Industrial SAW PACKAGES
ICS31230-36 Industrial 3HP, 1ph, 230V 60Hz 36 inch Ind T-Glide Fence System
ICS31230-52 Industrial 3HP, 1ph, 230V 60Hz 52 inch Ind T-Glide Fence System
ICS51230-36 Industrial 5HP, 1ph, 230V 60Hz 36 inch Ind T-Glide Fence System
ICS51230-52 Industrial 5HP, 1ph, 230V 60Hz 52 inch Ind T-Glide Fence System
ICS53230-36 Industrial 5HP, 3ph, 230V 60Hz 36 inch Ind T-Glide Fence System
ICS53230-52 Industrial 5HP, 3ph, 230V 60Hz 52 inch Ind T-Glide Fence System
ICS53480-36 Industrial 5HP, 3ph, 480V 60Hz 36 inch Ind T-Glide Fence System
ICS53480-52 Industrial 5HP, 3ph, 480V 60Hz 52 inch Ind T-Glide Fence System
ICS73230-36 Industrial 7.5HP, 3ph, 230V 60Hz 36 inch Ind T-Glide Fence System
ICS73230-52 Industrial 7.5HP, 3ph, 230V 60Hz 52 inch Ind T-Glide Fence System
ICS73480-36 Industrial 7.5HP, 3ph, 480V 60Hz 36 inch Ind T-Glide Fence System
ICS73480-52 Industrial 7.5HP, 3ph, 480V 60Hz 52 inch Ind T-Glide Fence System
FENCE SYSTEMS
TGI2-FRT36A 36 inch Industrial T-Glide Fence System
TGI2-FRT52A 52 inch Industrial T-Glide Fence System
SLIDING TABLES
TSA-SA70 Large Sliding Table
TSA-SA48 Sliding Crosscut Table Attachment
DUST COLLECTION
TSG-FDC Floating Overarm Dust Collection Guard
TSA-ODC Overarm Dust Collection Assembly
OUTFEED TABLES
TSA-FOT Folding Outfeed Table
OFT30-CNS-000 30 inch Out-feed table
MOBILE BASES
MB-IND-000 Industrial Cabinet Saw Mobile Base
ROUTER TABLE
RT-TGI 30 inch In-Line Cast Iron Router Table for ICS
RT-F32 32 inch Fence Assembly For Router Tables
RT-PSW Power Switch for In-Line Router Tables
RT-ST2 Support Legs for In-Line Router Tables
RT-C30 30 x 16 inch Cast Iron Table for In-Line
Accessories
TSBC-10R2 Table Saw Brake Cartridge for 10 in Blades
TSDC-8R2 Table Saw Dado Cartridge for 8 in Dado sets
TSG-DC Dust Collecting Blade Guard Assembly
TSI-SLD Standard Table Saw Insert with Lock-Down Lever
TSI-DLD Dado Table Saw Insert with Lock-Down Lever for 8 in dado
CNS-07-148 40-Tooth Combination Table Saw Blade
CB104 184 60-Tooth Combination Table Saw Blade
BTS-R-40ATB Titanium Series 40-Tooth Combination Blade
BTS-P-80HATB Titanium Series 80-Tooth Blade
TGI2-T36A Industrial Series 36 inch Ext Table for ICS-52
RT-TGI2-R52A Industrial 52 inch Replacement Rails (no tube) for ICS-52
RT-TGI2-R36A Industrial 36 inch Replacement Rails (no tube) for ICS-36

 

The 10 inch SawStop Industrial Cabinet Saw is the reference by which all other saws are measured: Precision and heavy-duty construction, the revolutionary safety feature thats made SawStop famous, and 99 percent dust collection system thats second-to-none. It is, simply put, the finest SawStop saw ever made.

SawStop 10 Inch Industrial Table Saw
Main Features SawStop Safety System
Fully enclosed cabinet and 99 percent dust collection
Top of the line features and options
   
Ideal For Professional woodworkers
Woodshop classrooms
Maintenance shops
Expert hobbyists
High volume production shops
 
Mobility Optional Industrial Mobile Base
 
Blade Guard Dust Collection Blade Guard
 
Motor Size(s) 3HP
5HP
7.5HP
 
Power Requirements 220V
480V
600V
 
Table Dimensions 69 1/4 inch w X 36 1/2 inch d X 34 inch h (w/ 36 inch rails)
85 1/4 inch w X 36 1/2 inch d X 34 inch h (w/ 52 inch rails)
 
Weight 635 lbs (36 inch fence system)
685 lbs (52 inch fence system)
 
Arbor Bearing 62mm
 
Other Features Compatible with 10 inch standard blades and 8 inch dado sets
Left tilt blade

 

We didnt stop at our patented safety system.
The SawStop Industrial Cabinet Saw has several other features to help operators stay safe.

  • SawStop safety system prevents serious injury with always-on protection.
  • Now featuring 99 percent Dust Collection. The Centers for Disease Control has classified sawdust as a cancer-causing carcinogen. With an enhanced below-table blade shroud, the Industrial Cabinet Saw is a leader in dust collection.
  • With the addition of the new Dust Collection Blade Guard, the Industrial Cabinet Saw captures 99% of generated dust. This innovative blade guard collects above-table dust and features independent lateral sides to minimize exposure to the blade. Its low profile allows for cuts as narrow as ¾ of an inch.
  • Riving knife minimizes kickback and provides protection during non-through cuts.
  • No rough edges. The zero-clearance insert supports the wood throughout the cut and reduces tear-out and chip-out.
  • We double-check the saw every time you turn it on. A diagnostic self-check runs when you start the saw to ensure all systems are ready to detect an accident.
  • Sometimes you have your hands full and really need to stop the blade. Our large start/stop paddle with hands-free shutoff can be stopped with your knee allowing you to safely stop the blade even when both hands are busy. The paddle is located on the left side of the saw to minimize accidental shut off.
  • Never worry again about someone using your saw when you’re not around. The main power switch with lockout key prevents unauthorized users from operating the saw.
  • When it’s closed, its closed. Accessing the inside of the cabinet is easy with two safety-interlocked doors. The safety interlocks ensure the motor won’t start if either door is open.
  • When the power goes out, the saw stays off. The safety system won’t allow the motor to restart automatically when the power comes back on.
  • Left-tilting blade helps prevent wood from binding against the fence.

s-h alt

Specification
Overall saw dimensions: 44 w x 34 d x 34 h inch
69 1/4 w x 36 1/2 d x 34 h inch
(w/ optional fence and 36 inch rails)
85 1/4 w x 36 1/2 d x 34 h inch
(w/ optional fence and 52 inch rails)

Motor: (all 60Hz, TEFC):

ICS31230: 3 hp, 1 phase, 230 V, 13 A
ICS51230: 5 hp, 1 phase, 230 V, 20.5 A (optional)
ICS53230: 5 hp, 3 phase, 230 V, 13 A (optional)
ICS53480: 5 hp, 3 phase, 480 V, 6.5 A (optional)
ICS73230: 7.5 hp, 3 phase, 230 V, 17.8 A (optional)
ICS73480: 7.5 hp, 3 phase, 480 V, 9 A (optional)
Cabinet footprint: 20 w x 25 d inch
Cast iron table: 24 w x 30 d inch, 44 w x 30 d inch (w/ extension wings)
Extension wing: 10 w x 30 d inch
Extension table (optional): 24 w x 30 d inch (36 inch rails), 40 w x 30 d inch (52 inch rails)
Weights
(may vary with motor):
530 lbs (table saw only)
635 lbs (with optional fence, 36 inch rails and table)
685 lbs (with optional fence, 52 inch rails and table)
Shipping weight (approx.): 640 lbs (table saw only)
Blade: 60-tooth, professional grade, 5/8 inch arbor
Blade diameter: 10 inch
Blade tilt: Left
Blade kerf: 3mm
Blade plate thickness: 2mm
Max. depth of cut, blade at 0º: 3 1/8 inch
Max. depth of cut, blade at 45º: 2 1/4 inch
Max. rip, right of blade: 52 1/2 inch (with optional 52 inch rails)

36 1/2 inch (with optional 36 inch rails)

Max. rip, left of blade: 12 1/2 inch
Dado diameter: 8 inch (requires a separate brake cartridge)
Dado max. width: 13/16 inch
Arbor diameter at blade: 5/8 inch
Main bearing size: 62mm OD x 30mm ID
Second bearing size: 52mm OD x 25mm ID
Table in front of blade (max. elevation): 11 inch
Table behind blade (max. elevation): 9 3/4 inch
Arbor Runout: 0.001 inch Maximum allowable runout
Blade lateral movement over full elevation range: 0.006 inch Maximum
Table flatness measured diagonally: 0.010 inch Maximum gap
Overall table and extension wing flatness: 0.025 inch Maximum gap
Blade alignment with miter slot: 0.010 inch Maximum displacement
Deviation of miter gauge indexing stops from actual:  plus / minuse 0.25 degree
Alignment between splitter and blade: 0.010 inch Maximum difference
Miter slots: T-shaped, 3/4 inch at top, 1 inch at bottom, 3/8 inch deep

11 1/8 inch center-to-center

5 1/2 inch (arbor flange to center of right slot)

Dust collection port diameter: 4 inch
Riving knife / splitter thickness: 2.33mm
Blade guard: polycarbonate, extends only 5/8 inch to right of blade
Insert: zero clearance, phenolic core, melamine surfaces
Hand wheels: 8 inch diameter, cast iron with chrome handle
Belts: 2 V-ribbed belts

vega table saw fence

Table Saw Fence

COMPARE PERFORMANCE and PRICE WITH ANY FENCE!
Being able to cut materials safely and precisely on your table saw is essential for fast and accurate Woodworking. Unless saw fences are well designed they make cutting a chore instead of pleasure, resulting in poor quality and inaccu- rate cuts. Most Saw Fence Systems….

  1. Do not lock parallel to saw blade.
  2. Do not have accurate measuring scales.
  3. Have Fence Bars that are too short.
  4. Do not have adequate width ripping capacity.
  5. Require frequent re-alignment.
  6. Lack safety devices.
  7. Are unable to be finely adjusted.

The Vega Saw Fence Systems solve all of these problems (and more!) to assure Accurate and reliable cuts combined with smooth, precise motion.

Product Description

MODEL PRO 26, PRO 40, and PRO 50

The Professional Model features the ruggedness and durability for Commercial production requirement, yet is extremely refined for the serious woodworkers needs and wants. With larger components and greater rigidity, the Professional Model is designed for 10 - 12 inch Saws cutting heavier materials and commercial use. The Vega retrofit Saw Fence System is available with 26, 40 or 50 inch rip capacity to the right of the blade and 10″ to the left, with a standard fence length of 42 inch on models PRO 26, PRO 40, and PRO 50. For saw tables between 34 and 42 inches deep, the PRO 26L, PRO 40L, AND PRO 50L ARE available featuring a 50 inch fence bar.

UTILITY MODEL 26 or 50

Designed for contractors saws, smaller cabinet saws, and 10 inch saws that don’t receive extremely heavy use, the Utility Model Fence is simply a small version of the very successful Professional Model. With all the great features of the Pro Model (fast installation, super precision, micro adjustments and more), the Util- ity Fence will upgrade your saw to a very precise cutting machine at a very rea- sonable price.

The Utility Model Vega Saw Fence System is available with 26 or 50 inch rip capacity to the right of the blade and 8 inch to the left.

FENCE ACCESSORIES

Vega manufactures a number of great accessories for the Professional and Util- ity Model fences making them more convenient, productive and safer to use. All accessories are available for both models except the Leg Set which is not necessary for the Utility 26.

You compare the features!

EASY TO INSTALL

No other Fence can be installed on your saw as easily as The Vega Saw Fence, according to American Woodworker Magazine (Oct.92) “I found the Vega Model 50 the easiest to install of all the fences.”

Vega Saw Fences are designed to use existing bolt holes (no drilling required) of Delta Unisaws and Contractors Saws, Powermatic Model 66, most Sears 10 inch saws and most other saws having fence rail mounting holes 8 -9 inch on either side of the blade. Other saws may require drilling 2 or 4 holes. Little accuracy is needed as the Fence Mounting System allows full adjustment. (Installation may be as little as 15 minutes.) Features which help make this Fence so easy to install include:

  1. Pre-drilled and tapped holes to fit most saws.
  2. Slotted Front Brackets to allow vertical and horizontal adjustments.
  3. Jacking Plates to assist in leveling the Fence Rails
  4. Easy to follow instructions.

ALUMINUM FENCE HEAD

Extruded from 6005 - T6 high strength aluminum, the Vega fence head closely contours the polished chrome front rail providing excellent fit and nearly eliminating side play in the fence during adjustment. In ad- dition, the combination of the polished chrome tube and the aluminum head produces an almost ideal bearing surface for low friction and long life. The fence head simply lifts off the front rail for quick fence removal and installation.

EXCLUSIVE MICRO ADJUSTMENTS!

The Vega Saw Fences are the only Fences with true Micro Adjustment capability. If you require precise adjustment from your tablesaw, this is a necessary feature. The Micro  Adjustment allows you to move the Fence very precisely in either direction, via a threaded rod  thumb nut combination. For the final adjustment of only a few thousandths of an inch, Vega provides a threaded mechanism for final, precise setting.

To operate the Micro Adjust:

  1. Press down on the small knob at the right end of the Fence Head to lock the Micro Adjust Cam.
  2. Release the Main Cam.
  3. Rotate the Thumb Nut under the Fence head to move the Fence very precisely… (one full rotation of the nut is 1/16 inch)
  4. After adjusting is complete, lock the Main Cam.

NO MORE BUMPING…

… and hoping for the best! With other saw fences precise adjustments is achieved using this technique.

MADE OF HIGH QUALITY MATERIALS

Vega has carefully chosen only the highest quality materials to construct their Saw Fences. Three unique precision aluminum extrusions, the highest grade of plating quality tubing and super tough and attractive epoxy coating, combined with meticulous care in fabrication result in a truly superior product.

A. Front Guide Rails
The Front Fence Rail is a precision rolled, plating quality tube with a very thick wall for extreme stiffness. The bar is tapped for attachment of the front mounting brackets, table extension plates, and the Vega leg kit (optional). It is chrome plated and plated and polished to provide an extremely low friction glide path for smooth and easy adjustment of the fence.

B. Rear Guide Rails
The Rear Fence Rail is a 1-1/2 inch square tube predrilled for mounting to the exist- ing holes (in most saws) and tapped to hold the extension table support plates and Vega leg kit (optional). The Rail is epoxy coated for low friction, high durability, and an attractive finish.

C. The Fence Bar
The Vega Fence Bars are aircraft quality aluminum alloy extrusions shaped for extreme stiffness while being relatively lightweight for easy handling. They are very accurate bars with side flatness held to extremely close tolerances, resulting in a very uniform surface to guide material through the saw blade for precision cuts. The Fence Bars have a Black Anodized finish which provides extreme surface hardness and low friction.

D. Mounting Brackets
These extruded aluminum mounts help to make the Vega Saw Fence the easiest and fastest aftermarket saw fence to install. They provide simple and accurate vertical and horizontal adjustment for the front guide rail and simply bolt to the saw table through existing holes (in most saws).

E. Jacking Plates
To further assist in easy and accurate installation, jacking plates (4) are provided at the mounting points of the front and rear rail to make leveling and setting fence clearance easy.

F. Rear Hold Down Bracket
The rear hold down bracket prevents the rear of the fence from raising if the fence issued in conjunction with stock feed systems. It is adjusted to just clear the lower side of the rear guide rail.

Support Plates For Extension Tables
(All Models except Pro 26 and Utility 26) To extend the work surface of your saw, Vega provides four Table Support Plates. These Plates are bolted to the underside of the Front and Rear Fence Rails to support an extension table which can easily construct. In addition, the extension table will strengthen the Saw Fence System.

Vega Fence Models

Model Rip Capacity Right Rip Capacity Left Fence Bar Length Front Rail Dia.
Vega Utility 26 26 8 36 inch 1-3/4 inch
Vega Utility 50 50 8 36 inch 1-3/4 inch
Vega Pro 40 40 10 42 inch 2 inch
Vega Pro 50 50 10 42 inch 2 inch
Vega Pro 40L 40 10 50 inch 2 inch
Vega Pro 50L 50 10 50 inch 2 inch
Models
72024 Utility Saw Fence 26 inch Rip Capacity 36 inch Fence Bar  Still MADE in the USA
72025 Utility Saw Fence 50 inch Rip Capacity 36 inch Fence Bar  Still MADE in the USA
72578 Pro 40 inch Rip Capacity 42 inch Fence Bar  Still MADE in the USA
72580 Pro 50 inch Rip Capacity 42 inch Fence Bar  Still MADE in the USA



 

oliver 0812 Circular blade sharpener

Finally, a sharpener for every home shop that will make your cutting job more efficient and easier at anytime and anywhere. All you need is the 0812 Circular Blade

Sharpener and a hand grinder with our included diamond grinding wheel, and you can save your workshop upkeep and have your blades in prime condition for efficiency and safety assurance.

Easy to use and almost hands free grinding allows you to
configure the sharpener to work with blades from 7.5 to 12 inch in diameter with 5/8 or 1 inch arbor.

Packaging Size

  • NW/GW: 24lbs/26.5lbs
  • 10 x 20 x 18.5 inch
  • 4 inch Angle grinder required for use
    (Not Included)

Features:

  • Sharpens circular saw blades from 7.5 to 12 inch diameter.
  • Portable compact design.
  • Sturdy die casting iron base.
  • 4 inch diamond blade included
  • Suitable for regular blades and carbide tip blades.
  • 2 Year Limited Warranty

Oliver cicular saw blade sharpener
812 Circular Saw Blade Sharpener

 

Call 1-800-458-3687 For Additonal Information on the SawStop Industrial Table Saws

ICS31230-36
INDUSTRIAL 3HP, 1PH, 230V 60HZ 36 IND T-GLIDE FENCE SYSTEM
Mfg. item #: ICS31230-36
SSS-ICS31230-36
lease to own for as little as:$83 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$4,149.00

797
ICS31230-52
INDUSTRIAL 3HP, 1PH, 230V 60HZ 52 IND T-GLIDE FENCE SYSTEM
Mfg. item #: ICS31230-52
SSS-ICS31230-52
lease to own for as little as:$85 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$4,249.00

797
ICS51230-36
INDUSTRIAL 5HP, 1PH, 230V 60HZ 36 IND T-GLIDE FENCE SYSTEM
Mfg. item #: ICS51230-36
SSS-ICS51230-36
lease to own for as little as:$92 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$4,599.00

797
ICS51230-52
OVERSTOCK SALE - INDUSTRIAL 5HP, 1PH, 230V 60HZ 52 I
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
FREE SHIPPING
Mfg. item #: ICS51230-52
SSS-ICS51230-52
lease to own for as little as:$94 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$4,699.00

797
ICS53230-36
INDUSTRIAL 5HP, 3PH, 230V 60HZ 36 IND T-GLIDE FENCE SYSTEM
Mfg. item #: ICS53230-36
SSS-ICS53230-36
lease to own for as little as:$92 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$4,599.00

797
ICS53230-52
OVERSTOCK SALE - INDUSTRIAL 5HP, 3PH, 230V 60HZ 52 I
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
FREE SHIPPING
Mfg. item #: ICS53230-52
SSS-ICS53230-52
lease to own for as little as:$94 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$4,699.00

797
ICS53480-36
INDUSTRIAL 5HP, 3PH, 480V 60HZ 36 IND T-GLIDE FENCE SYSTEM
Mfg. item #: ICS53480-36
SSS-ICS53480-36
lease to own for as little as:$92 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$4,599.00

797
ICS53480-52
INDUSTRIAL 5HP, 3PH, 480V 60HZ 52 IND T-GLIDE FENCE SYSTEM
Mfg. item #: ICS53480-52
SSS-ICS53480-52
lease to own for as little as:$94 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$4,699.00

797
ICS73230-36
INDUSTRIAL 7.5HP, 3PH, 230V 60HZ 36 IND T-GLIDE FENCE SYSTEM
Mfg. item #: ICS73230-36
SSS-ICS73230-36
lease to own for as little as:$102 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$5,099.00

797
ICS73230-52
INDUSTRIAL 7.5HP, 3PH, 230V 60HZ 52 IND T-GLIDE FENCE SYSTEM
Mfg. item #: ICS73230-52
SSS-ICS73230-52
lease to own for as little as:$104 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$5,199.00

797
ICS73480-36
INDUSTRIAL 7.5HP, 3PH, 480V 60HZ 36 IND T-GLIDE FENCE SYSTEM
Mfg. item #: ICS73480-36
SSS-ICS73480-36
lease to own for as little as:$102 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$5,099.00

797
ICS73480-52
INDUSTRIAL 7.5HP, 3PH, 480V 60HZ 52 IND T-GLIDE FENCE SYSTEM
Mfg. item #: ICS73480-52
SSS-ICS73480-52
lease to own for as little as:$104 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$5,199.00

797
TGI2-FRT36A
36 INDUSTRIAL T-GLIDE FENCE SYSTEM
Mfg. item #: TGI2-FRT36A
SSS-TGI2-FRT36A
FREE shipping when ordered with a machine from this manufacturer.20
$500.00

797
TGI2-FRT52A
52 INDUSTRIAL T-GLIDE FENCE SYSTEM
Mfg. item #: TGI2-FRT52A
SSS-TGI2-FRT52A
FREE shipping when ordered with a machine from this manufacturer.20
$600.00

797
TSA-SA70
LARGE SLIDING TABLE
Mfg. item #: TSA-SA70
SSS-TSA-SA70
FREE shipping when ordered with a machine from this manufacturer.20
$1,459.00

797   1
TSA-SA48
SLIDING CROSSCUT TABLE ATTACHMENT
Mfg. item #: TSA-SA48
SSS-TSA-SA48
FREE shipping when ordered with a machine from this manufacturer.20
$1,199.00

797
TSG-FDC
OVERSTOCK SALE - FLOATING OVERARM DUST COLLECTION GU
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
FREE SHIPPING
Mfg. item #: TSG-FDC
SSS-TSG-FDC
FREE shipping when ordered with a machine from this manufacturer.20
$449.00

797
TSA-ODC
OVERSTOCK SALE - OVERARM DUST COLLECTION ASSEMBLY
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
FREE SHIPPING
Mfg. item #: TSA-ODC
SSS-TSA-ODC
FREE shipping when ordered with a machine from this manufacturer.20
$249.00

797   1
TSA-FOT
FOLDING OUTFEED TABLE
Mfg. item #: TSA-FOT
SSS-TSA-FOT
FREE shipping when ordered with a machine from this manufacturer.20
$349.00

797
OFT30-CNS-000
30 OUT-FEED TABLE
Mfg. item #: OFT30-CNS-000
SSS-OFT30-CN{00
FREE shipping when ordered with a machine from this manufacturer.20
$99.00

797
MB-IND-000
OVERSTOCK SALE - INDUSTRIAL CABINET SAW MOBILE BASE
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
FREE SHIPPING
Mfg. item #: MB-IND-000
SSS-MB-IND-000
FREE shipping when ordered with a machine from this manufacturer.20
$349.00

797
RT-TGI
30 IN-LINE CAST IRON ROUTER TABLE FOR ICS
Mfg. item #: RT-TGI
SSS-RT-TGI
FREE shipping when ordered with a machine from this manufacturer.20
$649.00

797
RT-F32
32 FENCE ASSEMBLY FOR ROUTER TABLES
Mfg. item #: RT-F32
SSS-RT-F32
FREE shipping when ordered with a machine from this manufacturer.20
$169.00

797
RT-PSW
POWER SWITCH FOR IN-LINE ROUTER TABLES
Mfg. item #: RT-PSW
SSS-RT-PSW
FREE shipping when ordered with a machine from this manufacturer.20
$45.00

797
RT-ST2
SUPPORT LEGS FOR IN-LINE ROUTER TABLES
Mfg. item #: RT-ST2
SSS-RT-ST2
FREE shipping when ordered with a machine from this manufacturer.20
$40.00

797
RT-C30
30 X 16 CAST IRON TABLE FOR IN-LINE
Mfg. item #: RT-C30
SSS-RT-C30
FREE shipping when ordered with a machine from this manufacturer.20
$395.00

797
TSBC-10R2
OVERSTOCK SALE - TABLE SAW BRAKE CARTRIDGE FOR 10 IN
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
FREE SHIPPING
Mfg. item #: TSBC-10R2
SSS-TSBC-10R2
FREE shipping when ordered with a machine from this manufacturer.20
$79.00

797   22
TSDC-8R2
OVERSTOCK SALE - TABLE SAW DADO CARTRIDGE FOR 8 IN D
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
FREE SHIPPING
Mfg. item #: TSDC-8R2
SSS-TSDC-8R2
FREE shipping when ordered with a machine from this manufacturer.20
$99.00

797
TSG-DC
OVERSTOCK SALE - DUST COLLECTING BLADE GUARD ASSEMBL
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
FREE SHIPPING
Mfg. item #: TSG-DC
SSS-TSG-DC
FREE shipping when ordered with a machine from this manufacturer.20
$139.00

797
TSI-SLD
OVERSTOCK SALE - STANDARD TABLE SAW INSERT WITH LOCK
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
FREE SHIPPING
Mfg. item #: TSI-SLD
SSS-TSI-SLD
FREE shipping when ordered with a machine from this manufacturer.20
$49.00

386   1
TSI-DLD
OVERSTOCK SALE - DADO TABLE SAW INSERT WITH LOCK-DOW
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
FREE SHIPPING
Mfg. item #: TSI-DLD
SSS-TSI-DLD
FREE shipping when ordered with a machine from this manufacturer.20
$49.00

797   1
Call for price. SSS-CNS-07-148
Call for price. SSS-CB104 184
BTS-R-40ATB
TITANIUM SERIES 40-TOOTH COMBINATION BLADE
Mfg. item #: BTS-R-40ATB
SSS-BTS-R-40ATB
FREE shipping when ordered with a machine from this manufacturer.20
$69.99

624
BTS-P-80HATB
TITANIUM SERIES 80-TOOTH BLADE
Mfg. item #: BTS-P-80HATB
SSS-BTS-P-80{00
FREE shipping when ordered with a machine from this manufacturer.20
$89.99

624
TGI2-T36A
INDUSTRIAL SERIES 36 EXT TABLE
Mfg. item #: TGI2-T36A
SSS-TGI2-T36A
FREE shipping when ordered with a machine from this manufacturer.20
$125.00

797
RT-TGI2-R52A
INDUSTRIAL 52 REPLACEMENT RAILS (NO TUBE)
Mfg. item #: RT-TGI2-R52A
SSS-RT-TGI2-{01
FREE shipping when ordered with a machine from this manufacturer.20
$179.00

797
RT-TGI2-R36A
INDUSTRIAL 36 REPLACEMENT RAILS (NO TUBE)
Mfg. item #: RT-TGI2-R36A
SSS-RT-TGI2-{00
FREE shipping when ordered with a machine from this manufacturer.20
$159.00

797
72024
UTILITY SAW FENCE 26 RIP CAPACITY 36 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72024
VEGA72024
$39.95 Freight on orders from this manufacturer.1021
$299.00

-1443
72025
UTILITY SAW FENCE 50 RIP CAPACITY 36 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72025
VEGA72025
$39.95 Freight on orders from this manufacturer.1021
$329.00

-1808
72578
PRO 40 RIP CAPACITY 42 FENCE BAR
Mfg. item #: 72578
VEGA72578
$39.95 Freight on orders from this manufacturer.1021
$369.00

18   1
72580
PRO 50 RIP CAPACITY 42 FENCE BAR
Mfg. item #: 72580
VEGA72580
$39.95 Freight on orders from this manufacturer.1021
$349.00

18   1
812
SAW BLADE SHARPENER ** SHIPPING WEIGHT = 20 LBS
Mfg. item #: 812
OLV812
FREE shipping when ordered with a machine from this manufacturer.20
$249.99

782
Copyright © 2021 Smith-Hamilton, Inc
0.032 210326 15:12