chat now with southern tool
Technical Sales 1–800–458–3687

Thern High Speed Worm Gear Winch


 

All Thern winches and cranes are sold without wire rope.

Series 4WP2D High Speed Worm Ger Portable Power Winch

  • Upto 1,500 lb Capacity

Need some extra speed? The 4WP2D8 is a direct-drive unit to deliver that extra boost with a slightly lower load rating.

We Suggest you download the following Cut Sheet for Additional Information Atlas_4WP2D_Portable_PowerWinch

Feel Free to email your us your application for a Quote

Durable and dependable, Thern heavy duty power winches are built to handle tough industrial jobs year after year.

QUICK FACTS

  • Direct drive design
  • Machine cut bronze worm gears
  • Enclosed oil bath
  • Internal mechanical brake
  • Ball bearings
  • Pressure plate
  • Dual function cable anchor
  • Mounting options
  • 2-Year Limited Warranty

 

Thern portable power winches are available in either worm gear or worm/helical gear configurations to efficiently raise, lower and pull loads weighing up to 3/4 ton. We also offer a variety of options to meet the needs of your unique application.

Thern portable power winches are manufactured with the following features:

  • Machine cut worm gears for accurate operation and long lasting service.
  • Enclosed oil bath provides continuous lubrication of gears to minimize wear.
  • 115 Volt Single Phase Electric Motor includes power cord with grounded plug and a momentary contact-type push button pendant control on a control cord.
  • Oil seals keep oil in and dirt out.
  • Internal mechanical brake provides positive load control for lifting and lowering operations.
  • Ball Bearings and self-aligning bronze bearings provide smooth and efficient operation.
  • Corrosion Resistant durable paint finish protects against corrosion in harsh environments.
  • Pressure Plate applies pressure to drum and wire rope to help maintain uniform winding. Included in standard Atlas Construction Winches.
  • Large Diameter Drums minimize wear to the wire rope and help extend its life.
  • Dual Function Cable Anchor for quick disconnect of wire rope with swagged ball fitting, or recessed cable anchor with set screw for wire rope with unfinished end.
  • Clutch Models allow operator to manually disengage the drum to rapidly unwind wire rope. Clutch models do not include pressure plates.
  • Accessory Options include limit switches, cable pressure plates, torque limiting controls, and emergency handles for manual operation.
  • Mounting options include floor, wall and ceiling.
  • Wire rope assemblies are sold separately.
  • 2-year Limited Warranty

For more information on other options available for an industrial, heavy-duty power winch, contact Us  today.

Start building your heavy duty power winch today. Call 800-458-3687 for more information on available options.

Owner’s Manual
4WP2D Series
Cut Sheet
4WP2D Atlas
Owners Manual Cut Sheet

We Suggest you download the following Cut Sheet for Additional Information

Feel Free to email your us your application for a Quote

Up to 1500 lb capacity
Machine Cut Worm Gears provide accurate operation and long lasting service.
Enclosed Oil Bath provides continuous lubrication of gears to minimize wear. Oil seals keep oil in and dirt out.
115 Volt Single Phase Electric Motor includes power cord with grounded plug and a momentary contact-type push button pendant control on a control cord.
Internal Mechanical Brake provides positive load control for lifting and lowering operations.
Ball Bearings and self-aligning bronze bearings provide smooth and efficient operation.
Pressure Plate on series 4WP2T8 only, applies pressure to drum and wire rope to help maintain uniform winding.
Dual Function Cable Anchor for quick disconnect of wire rope with swagged ball fitting, or recessed cable anchor with set screw for wire rope with unfinished end.
Mounting Options include floor, wall, or ceiling.
Wire Rope Assemblies sold separately.
Cast Aluminum construction, for lightweight strength.
Corrosion Resistant durable paint finish protects against corrosion in harsh environments
Large Diameter Drums minimize wear to the wire rope and help extend its life.
Clutch Model allows operator to manually disengage the drum to rapidly unwind wire rope. Clutch models do not included pressure plates.

 

Model Number Extensions

Motor

Load Rating

Wire Rope

Line Speed

Drum Capacity2

Weight3

Model

Load Rating

Line Speed

Motor Codes

HP

1st Layer

Mid Drum

Full Drum

Dia.1

1st Layer

Full Drum

1st Layer

Mid Drum

Full Drum

Approx. Ship

 

(lb)

(fpm)

   

(lb)

(lb)

(lb)

(in)

(fpm)

(fpm)

(ft)

(ft)

(ft)

(lb)

High Speed Atlas winches for lifting or pulling

4WP2D8

800

26

A,B,D,E

1

800

460

330

1/4

26

65

19

130

280

100

4WP2D8

800

40

D,E

1.5

800

460

330

1/4

40

97

19

130

280

100

4WP2D8

1500

26

D,E

2

1500

900

600

1/4

26

65

19

130

280

100

4WP2D8

1500

40

B,D,E

3

1500

900

600

1/4

40

97

19

130

280

100

 

High Speed Clutch Models for HORIZONTAL PULLING ONLY

4WP2DC

800

26

A,B,D,E

1

800

460

330

1/4

26

65

12

87

190

100

4WP2DC

800

40

D,E

1.5

800

460

330

1/4

40

97

12

87

190

100

4WP2DC

1500

26

D,E

2

1500

900

600

1/4

26

65

12

87

190

100

4WP2DC

1500

40

B,D,E

3

1500

900

600

1/4

40

97

12

87

190

100

 

1 Minimum wire rope diameter is 1/4 inch.
2 Actual drum capacities may be 25-30% less due to non-uniform winding. Wire rope tension will also affect drum capacity.
3 Weight may vary with motor.

4WP2D Series High Speed Winch
4WP2D8-800-26-A/B 1 hp ATLAS electric with brake, no controls
4WP2D8-800-26-D/E 1 hp ATLAS electric with brake, no controls
4WP2D8-800-40-D/E 1.5 hp ATLAS electric with brake, no controls
4WP2D8-1500-26-D/E 2 hp ATLAS electric with brake, no controls
4WP2D8-1500-40-B 3 hp ATLAS electric with brake, no controls
4WP2D8-1500-40-D/E 3 hp ATLAS electric with brake, no controls
4WP2DC-800-26-A/B 1 hp ATLAS electric with brake and clutch, no controls
4WP2DC-800-26-D/E 1 hp ATLAS electric with brake and clutch, no controls
4WP2DC-800-40-D/E 1.5 hp ATLAS electric with brake and clutch, no controls
4WP2DC-1500-26-D/E 2 hp ATLAS electric with brake and clutch, no controls
4WP2DC-1500-40-B 3 hp ATLAS electric with brake and clutch, no controls
4WP2DC-1500-40-D/E 3 hp ATLAS electric with brake and clutch, no controls

* Price Includes Electric Motor - Electronic Controls are sold sepertaly
** Winches above have a Voltage Options - Must indicate voltage on the order - NO PRICE DIFFERENCE

Atlas_4WP2D_Portable_PowerWinch

Motor Codes
A 115 volt 1 Phase
B 230 volt 1 Phase
D 230 volt 3 phase
E 460 volt 3 phase
All other voltages or questions
please contact sales @ 800-458-3687
Feel Free to email your us your application for a Quote

Click here to view the Electronic Controls options
to Operate Power Winches Remotely


 ELECTRONIC CONTROLS
Electronic Controls available for the 4WP2D Power Winches
10L2A1 NEMA 1
10L7E1 NEMA 1
10L2A4 NEMA 4 – watertight
10L7E4 NEMA 4 – watertight
10P1A46 6 ft pendant control
TPL-4WP2T8 Two Part Line Kit

 

4WP2D8-800-26-A
1 HP _ ATLAS ELECTRIC WITH BRAKE, NO CONTROLS - WGT = 100 LBS
Mfg. item #: 4WP2D8-800-26-A
THE4WP2D8-80{03
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,841.88

69
4WP2D8-800-26-D
1 HP _ ATLAS ELECTRIC WITH BRAKE, NO CONTROLS - WGT = 100 LBS
Mfg. item #: 4WP2D8-800-26-D
THE4WP2D8-80{04
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,815.63

69
4WP2D8-800-40-D
1.5 HP _ ATLAS ELECTRIC WITH BRAKE, NO CONTROLS - WGT = 100 LBS
Mfg. item #: 4WP2D8-800-40-D
THE4WP2D8-80{05
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,841.88

69
4WP2D8-1500-26-
2 HP _ ATLAS ELECTRIC WITH BRAKE, NO CONTROLS - WGT = 100 LBS
Mfg. item #: 4WP2D8-1500-26-
THE4WP2D8-15{04
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,916.25

69
4WP2D8-1500-40-
3 HP _ ATLAS ELECTRIC WITH BRAKE, NO CONTROLS - WGT = 100 LBS
Mfg. item #: 4WP2D8-1500-40-
THE4WP2D8-15{05
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,960.00

69
4WP2D8-1500-40-
3 HP _ ATLAS ELECTRIC WITH BRAKE, NO CONTROLS - WGT = 100 LBS
Mfg. item #: 4WP2D8-1500-40-
THE4WP2D8-15{06
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,938.13

69
4WP2DC-800-26-A
1 HP _ ATLAS ELECTRIC WITH BRAKE AND CLUTCH, NO CONTROLS - WGT = 100 LBS
Mfg. item #: 4WP2DC-800-26-A
THE4WP2DC-80{03
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,082.50

69
4WP2DC-800-26-D
1 HP _ ATLAS ELECTRIC WITH BRAKE AND CLUTCH, NO CONTROLS - WGT = 100 LBS
Mfg. item #: 4WP2DC-800-26-D
THE4WP2DC-80{04
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,060.63

69
4WP2DC-800-40-D
1.5 HP _ ATLAS ELECTRIC WITH BRAKE AND CLUTCH, NO CONTROLS - WGT = 100 LBS
Mfg. item #: 4WP2DC-800-40-D
THE4WP2DC-80{05
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,082.50

69
4WP2DC-1500-26-
2 HP _ ATLAS ELECTRIC WITH BRAKE AND CLUTCH, NO CONTROLS - WGT = 100 LBS
Mfg. item #: 4WP2DC-1500-26-
THE4WP2DC-15{03
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,161.25

69
4WP2DC-1500-40-
3 HP _ ATLAS ELECTRIC WITH BRAKE AND CLUTCH, NO CONTROLS - WGT = 100 LBS
Mfg. item #: 4WP2DC-1500-40-
THE4WP2DC-15{04
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,209.38

69
4WP2DC-1500-40-
3 HP _ ATLAS ELECTRIC WITH BRAKE AND CLUTCH, NO CONTROLS - WGT = 100 LBS
Mfg. item #: 4WP2DC-1500-40-
THE4WP2DC-15{05
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,191.88

69
10L2A1
NEMA 1 - WGT = 3 LBS
Mfg. item #: 10L2A1
THE10L2A1
"Ships by UPS, see freight calculator at checkout."2
$358.75

69
10L7E1
NEMA 1 - WGT = 3 LBS
Mfg. item #: 10L7E1
THE10L7E1
"Ships by UPS, see freight calculator at checkout."2
$503.13

69
10L2A4
NEMA 4 _ WATERTIGHT - WGT = 7 LBS
Mfg. item #: 10L2A4
THE10L2A4
"Ships by UPS, see freight calculator at checkout."2
$560.00

69
10L7E4
NEMA 4 _ WATERTIGHT - WGT = 7 LBS
Mfg. item #: 10L7E4
THE10L7E4
"Ships by UPS, see freight calculator at checkout."2
$927.50

69
10P1A46
6 FT PENDANT CONTROL - WGT = 5 LBS
Mfg. item #: 10P1A46
THE10P1A46
"Ships by UPS, see freight calculator at checkout."2
$317.25

69
TPL-4WP2T8
TWO PART LINE KIT _ NOT AVAILABLE ON 4WP2 SERIES - WGT = 4 LBS
Mfg. item #: TPL-4WP2T8
THETPL-4WP2T8
"Ships by UPS, see freight calculator at checkout."2
$312.59

69
Copyright © 2018 Smith-Hamilton, Inc
0.015 150506 13:59