|
Model 4WP2T
|
All Thern winches and cranes are sold without wire rope.
We Suggest you download the following Cut Sheet for Additional Information
Owners manual - 4WP2 and 4WP2T Series Worm Gear Power Winches
Vut Sheet - 4WP2 and 4WP2T
Feel Free to email your us your application for a
Quote
Durable and dependable, Thern heavy duty power winches are built to handle tough industrial jobs year after year.
Thern portable power winches are available in either worm gear or worm/helical gear configurations to efficiently raise, lower and pull loads weighing up to 1 ton. We
also offer a variety of options to meet the needs of your unique application.
Thern portable power winches are manufactured with the following features:
-
Machine cut worm gears for accurate operation and long lasting service.
-
Enclosed oil bath provides continuous lubrication of gears to minimize wear.
-
115 Volt Single Phase Electric Motor includes power cord with grounded plug and a momentary contact-type push button pendant control on a control cord.
-
Oil seals keep oil in and dirt out.
-
Internal mechanical brake provides positive load control for lifting and lowering operations.
-
Ball Bearings and self-aligning bronze bearings provide smooth and efficient operation.
-
Corrosion Resistant durable paint finish protects against corrosion in harsh environments.
-
Pressure Plate applies pressure to drum and wire rope to help maintain uniform winding. Included in standard Atlas Construction Winches.
-
Large Diameter Drums minimize wear to the wire rope and help extend its life.
-
Dual Function Cable Anchor for quick disconnect of wire rope with swagged ball fitting, or recessed cable anchor with set screw for wire rope with unfinished
end.
-
Clutch Models allow operator to manually disengage the drum to rapidly unwind wire rope. Clutch models do not include pressure plates.
-
Accessory Options include limit switches, cable pressure plates, torque limiting controls, and emergency handles for manual operation.
-
Mounting options include floor, wall and ceiling.
-
Wire rope assemblies are sold separately.
-
2-year Limited Warranty
For more information on other options available for an industrial, heavy-duty power winch, contact Us today.
Start building your heavy duty power winch today. Call 800-458-3687 for more information on available options.
We Suggest you download the following Cut Sheet for Additional Information
Feel Free to email your us your application for a Quote
|
Up to 2000 lb capacity
|
|
Machine Cut Worm Gears provide accurate operation and long lasting service.
|
|
Enclosed Oil Bath provides continuous lubrication of gears to minimize wear. Oil seals keep oil in and dirt out.
|
|
115 Volt Single Phase Electric Motor includes power cord with grounded plug and a momentary contact-type push button pendant control on a
control cord.
|
|
Internal Mechanical Brake provides positive load control for lifting and lowering operations.
|
|
Ball Bearings and self-aligning bronze bearings provide smooth and efficient operation.
|
|
Pressure Plate on series 4WP2T8 only, applies pressure to drum and wire rope to help maintain uniform winding.
|
|
Dual Function Cable Anchor for quick disconnect of wire rope with swagged ball fitting, or recessed cable anchor with set screw for wire rope
with unfinished end.
|
|
Mounting Options include floor, wall, or ceiling.
|
|
Wire Rope Assemblies sold separately.
|
|
Cast Aluminum construction, for lightweight strength.
|
|
Corrosion Resistant durable paint finish protects against corrosion in harsh environments
|
|
Large Diameter Drums minimize wear to the wire rope and help extend its life.
|
|
Clutch Model allows operator to manually disengage the drum to rapidly unwind wire rope. Clutch models do not included pressure
plates.
|
Click on the Part Number Below for Pricing or Call 800-458-3687
|
Worm Gear Power Winches
|
|
4WP2
|
2000 lb 1.3 hp 115 VAC ATLAS with brake for lifting
|
|
4WP2T8-2000-8
|
2000 lb 1.3 hp 115 VAC ATLAS 8 in drum with brake for lifting
|
|
4WP2TC-2000-8
|
2000 lb 1.3 hp 115 VAC ATLAS 5.5 in drum clutch model horizontal pulling only
|
|
The above winches include a standard 115-volt single-phase motor includes power cord with grounded plug and a momentary contact-type push button pendant control on a control cord.
|
|
Power Options - *Requires Purchase of Seperate Control
|
|
A*
|
115 volt 1 phase motor no controls or power cord TENV
|
|
B*
|
230 volt 1 phase motor no controls or power cord TEFC
|
|
D*
|
230 volt 3 phase motor no controls or power cord TEFC
|
|
E*
|
460 volt 3 phase motor no controls or power cord TEFC
|
|
All other voltages or hertz CALL FOR PRICING
|
|
PN
|
8-vane air motor with controls (mounted)
|
|
When ordering one of the above power options along with 4WP2 Series winch you must order a control in addition to the change in power option. See tab for ELECTRONIC CONTROLS.
|
Click here to view the Electronic Controls options
to Operate Power Winches Remotely
|
ELECTRICAL CONTROLS
|
|
Electronic Controls available for the 4WP2 Power Winches
|
|
10L2A1
|
NEMA 1
|
|
10L2A4
|
NEMA 4 â watertight
|
