USI 16x60 Lathe

Picture

s-h alt

Headstock
Specifications
Spindle Bearing
Gear Box
Carriage Apron
Bed
Tail Stock
Drive Motors
Shipping Data
Accessories

HEADSTOCK:
Spindle Speeds (Number)	12
Spindle Speeds (Range)	28-2000 RPM
Hole Thru Spindle	2"
Spindle Nose Type	D1-6
Headstock Center	MT#6
Headstock Length on Bed	19.88"
Number of Bearings on Spindle	3
Spindle Bearing Type	Roller and Angular

SPECIFICATIONS:
Swing Over Bed	16"
Swing Over Cross Slide	9.4"
Swing Over Gap	22"
Length of Gap	9.72"
Length of Gap in Front of Face Plate	5.98"
Distance Between Centers	60"

MAIN SPINDLE BEARING:
Outside Diameter	6.102"
Inside Diameter	3.543"
Length	28.188"

GEARBOX:
Threads Per Inch (#)Range	(28) 4-48 T.P.I.
Metric Threads (#)Range	(17) 0.5-6.5
Module Threads (#)Range	(11) 0.5-3.25
Diametral Pitch (#)Range	(18) 8-52
Long. Feeds (#)Range	(45) 0.0015-0.0267"
Cross Feeds (#)Range	(45) 0.0006-0.0115"
Leadscrew Dia./Range	1.33"/4 T.P.I.
Feed Rod Diameter	0.98"
Lubrication System	Oil Pump

CARRIAGE & APRON:
Cross Slide Travel	10"
Cross Slide Width of Bridge	6.3"
Compound Rest Travel	4"
Compound Rest Width	4.21"
Length of Carriage Bearing On Ways	17.52"
Graduation of Apron Handwheel	0.005"
Travel of Carriage Per Rev. of Handwheel	1"
Graduations of Carriage Cross Slide Handwheel (Direst Reading)	0.002"
Travel of Cross Slide Per rev. of Handwheel	0.4"
Height From Top of Compound to Centerline of Lathe	1.61"
Maximum Tool Holder Size	0.9" x 0.9"
Lubrication System	Oil Pump

BED:
Width of Bed	11.78"
Depth of Bed	14.09"
Hardness of Bed (Rockwell C)	50

TAILSTOCK:
Travel of Spindle Barrel	4.5"
Diameter of Spindle Barrel	2.36"
Taper of Center	MT#4
Tailstock Body Length of Bed	11.73"
Length of Barrel Graduations on Spindle	4"
Type of Clamping on Bed	Lever Clamp
Lubrication System	Reservoir

DRIVE & MOTORS:
Type of Input Drive	Vee Belt
Number of Vee Belts	4
Main Drive Motor	5.3 H.P.
Coolant Pump Motor	0.16 H.P

SHIPPING DATA U.S. INDUSTRIAL 1660-C:
Overall Width	45"
Overall Height	67"
Overall Length	117"
Shipping Weight	6000 lbs

STANDARD ACCESSORY PACKAGE:
3 Jaw Chuck (8") Face Plate Spindle Reduction Sleeve Steady Rest Longitudinal Stop Device Threading Dial Work Light Foot Brake Dead Centers Quick Change Gears Voltage Available 220V or 440V	4 Jaw Chuck (10") Drive Plate Back Splash Guard Follower Rest Micro Stop Device Front Chip Cover Coolant System Hand Tools Oil Gun Operation and Maintenance Manual "ROCKER" Tool Post Holder W/Left-Straight-Right Holders

Compare

16" X 60" PERCISION LATHE

Mfg. item #:

USI1660B

lease to own for as little as:$260 per month!

Call for freight quote on this item or we will confirm freight charges before shipping.¹

$12,990.00

3873

Call for price. USI1660C

Freight policies for items on this page:

1: Call for freight quote on this item or we will confirm freight charges before shipping.

Free freight offers apply only to deliveries to the lower 48 states by truck freight or ground UPS. Liftgate and non-commercial delivery charges may be extra.