Technical Sales 1–800–458–3687

Edwards 10 Ton Pipe/Tube Bender

10Ton-Bender-side.jpg

Tube/Pipe Bender Dies
10 Ton Tube/Pipe Hydraulic Bender Tube & Pipe Dies

Our 10 Ton Bender is a quick-connect hydraulic tool to greatly expand your fabrication capabilities. Designed for medium to heavy material

Get Bent!

  • Plug + Play Operation
  • Horizontal or Vertical Operating Positions
  • Proximity Switch Allows Easy, Repeatable Bends
  • Heavy-Duty Rolling Stand
  • Easy-to-Use Hand/Jog Controls

Our 10 Ton Bender is a quick-connect hydraulic tool to greatly expand your fabrication capabilities. Designed for medium to heavy material, the Edwards 10 Ton Bender powers through 2" (I.D.) Schedule 40 pipe, 2-1/2" (O.D.) tube and 2" square tube quickly and accurately. Choose from our over 260 standard Bender Die Sets to get your job done. Call for custom die information and material compatibility requirements.
 

See below for links to Bender die's pricing page

See below to download die's pdf

Power it up with an Edwards Ironworker with factory installed Hydraulic Accessory Pack or an Edwards Porta Power 5hp, 2750psi, portable power unit.

General Specifications:

  • Heavy Duly All Steel Construction
  • Smooth, Fast operation
  • 180 Degree Bend Capacity
  • Easy To Use Hand Controls
  • Operates Horizontal or Vertically
  • Heavy Duty Rolling and Locking Stand
  • Auto Stop Feature For Repeatable Bends
  • Quick Disconnect Hoses
  • 2in (10) Schedule 40 Pipe Capacity
  • 2-1/2in (00) .095in Tube Capacity
  • 2-1/4in .083in Chromoly Capacity
  • Die Sets Sold Separately
  • One Year Warranty
  • Cylinder 1-3/4in ram
  • Stroke 14in

 

10 Ton Tube/Pipe Bender    

Powered by the 40Ton (A) through 120Ton (A) Ironworker models, Elite Ironworker Series or our Porta Power, the 10 Ton Tube / Pipe Bender is a quick-connect hydraulic tool that expands your shop without breaking the bank. The Edwards 10Ton Tube / Pipe Bender powers through 2 in ID SCH40 pipe, 2.5 in O.D. tube and 2 in square tube fast and accurately. Features hand-jog operation, auto-stop controls for repeatability and a heavy duty rolling frame with rotating yoke for both horizontal and vertical bending operations.

Edward's 10 Ton Stand Alone Pipe & Tube Bender
HAT1000 10 Ton Tube/Pipe Bender  (Requires Hydraulic Pump Installed on the IW at time of Order OR Stand Alone Hydraulic Pump)
HAT1010 10 Ton Bender and Porta Power 1 Phase, 230 Volt
HAT1020 10 Ton Bender and Porta Power 3 Phase, 230 Volt
HAT1030 10 Ton Bender and Porta Power 3 Phase, 460 Volt

 

Precise and Durable

Our Edwards Bender Dies work solid round, solid square, Schedule 40 pipe, round and square tube. Dies and wipers are precision machined to ensure the highest quality bends. Choose from our over 260 standard Bender Die Sets to get your job done. Call for custom die information and material compatibility requirements.

Die sets include:

  • Forming Die
  • Saddle Strap
  • Saddle Bolt
  • Degree Pointer
  • Fine Adjustment Bolt
  • Wiper Mounting Block
  • Brass Wiper Blades (2)
  • Wiper Mounting Bolts (2)
  • Adjustment Set-Screw
GENERAL SPECIFICATIONS EDWARDS IRONWORKER/ PORTA-POWER
Standard Motor 5 HP 3~ 208 V or 230 V
1725 RPM 14 A
Optional Motors 5 HP 3~ 460 V
1725 RPM 7 A

5 HP 3~ 575 V
1725 RPM 6 A

5 HP 1~ 208 V or 230 V
1725 RPM 23 A
Hydraulic Pump 3-1/2 GPM - 1 Stage
Valve Pressure 2750 PSI
Reservoir 7 Gallons
GENERAL SPECIFICATIONS
Bend Capacity 180°
Pipe Capacity 2" (ID) Schedule 40
Tube Capacity 2-1/2" (OD) .095"
Square Tube Capacity 2" (OD) .25"
Chromoly Capacity 2-1/4" (OD) .083"
Cylinder 1-3/4" Ram
Stroke 14"
DIMENSIONS
Height 40-1/2"
Width 36-1/2"
Depth 42"
Shipping Weight 600 lb

 

 

Tube/Pipe Bender Dies

Click here to open the Round Pipe Bending DIe page for the 10-TB Bender
 

Precise and Durable

Our Edwards Bender Dies work solid round, solid square, Schedule 40 pipe, round and square tube. Dies and wipers are precision machined to ensure the highest quality bends. Choose from our over 260 standard Bender Die Sets to get your job done. Call for custom die information and material compatibility requirements.

Die sets include:

  • Forming Die
  • Saddle Strap
  • Saddle Bolt
  • Degree Pointer
  • Fine Adjustment Bolt
  • Wiper Mounting Block
  • Brass Wiper Blades (2)
  • Wiper Mounting Bolts (2)
  • Adjustment Set-Screw

Tube/Pipe Bender Dies

Click here to open the Round Tube Bending DIe page for the 10-TB Bender
 

Precise and Durable

Our Edwards Bender Dies work solid round, solid square, Schedule 40 pipe, round and square tube. Dies and wipers are precision machined to ensure the highest quality bends. Choose from our over 260 standard Bender Die Sets to get your job done. Call for custom die information and material compatibility requirements.

Die sets include:

  • Forming Die
  • Saddle Strap
  • Saddle Bolt
  • Degree Pointer
  • Fine Adjustment Bolt
  • Wiper Mounting Block
  • Brass Wiper Blades (2)
  • Wiper Mounting Bolts (2)
  • Adjustment Set-Screw

Tube/Pipe Bender Dies

 

Click here to open the Square Tube Bending DIe page for the 10-TB Bender

Precise and Durable

Our Edwards Bender Dies work solid round, solid square, Schedule 40 pipe, round and square tube. Dies and wipers are precision machined to ensure the highest quality bends. Choose from our over 260 standard Bender Die Sets to get your job done. Call for custom die information and material compatibility requirements.

Die sets include:

  • Forming Die
  • Saddle Strap
  • Saddle Bolt
  • Degree Pointer
  • Fine Adjustment Bolt
  • Wiper Mounting Block
  • Brass Wiper Blades (2)
  • Wiper Mounting Bolts (2)
  • Adjustment Set-Screw

 

ED9-HAT1000
10 TON TUBE/PIPE BENDER , STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 600 LBS
Mfg. item #: ED9-HAT1000
EDWHAT1000
lease to own for as little as:$88 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$4,379.00

23
ED9-HAT1010
10 TON BENDER AND PORTABLE POWER UNIT 1 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1000 LBS
Mfg. item #: ED9-HAT1010
EDWHAT1010
lease to own for as little as:$190 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$9,489.00

23
ED9-HAT1020
10 TON BENDER AND PORTABLE POWER UNIT 3 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1000 LBS
Mfg. item #: ED9-HAT1020
EDWHAT1020
lease to own for as little as:$178 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$8,879.00

23
HAT1030
10 TON BENDER AND PORTA POWER 3 PHASE, 460 VOLT
CALL TODAY FOR YOUR BROTHER-IN-LAW DEAL ON THIS IRON WORKER HYDRAULIC ACCESSORY
Mfg. item #: HAT1030
EDWHAT1030
lease to own for as little as:$85 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

2323
Copyright © 2024 Smith-Hamilton, Inc
0.005 170105 15:23