Features
Robust cast handle for the big jobs
Premium grad lever hoist designed for commercial and industrial applications
1/2 ton, 3/4 ton, 1-1/2 ton, and 3 ton models
5' and 15' lifts standard, custom length lifts available
All steel construction with rugged one-peice cast handle
Completely enclosed western type automatic brake system for precise load spotting
Easy-To-Use with single hand operation and control
Simple design makes routine inspection and maintenance easy
Freewheeling feature without load for quick load attachment
Permanently lubricated gears under normal operating conditions
Premium 100 grade low wear chain resists abrasion
Drop forged safety hooks swivel 360 degrees for easy rigging
Proof tested with test certificate
Complies with OSHA, ANSI/ASME B30.21 and HST-3 standards
CAUTION: Be sure supporting structures and load-attaching devices used in conjunction with this puller provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people.
IMPORTANT:Before installation, read ownerùs manual for additional warnings and precautions. Not for use in explosive environment.
NOTE:Custom lifts available in any length. However, custom lift pullers are not returnable.
SPECIFICATIONS | ||||||||||
Stock No | Model | Rated Capacity(ton) | Standard Lift (ft) | Min. Distance Between Hooks (in) | Number of Falls | Load. Chain (Dia./MM) | Lift Per Full Turn (in) | Lbs Pull To Lift Capacity | Lever Length (in) | Ship Weight (lbs) |
225650 | JPNX-50-5 | 1/2 | 5 | 12 | 1 | 5 | 3-1/2 | 82 | 10 | 13-1/2 |
225675 | JPNX-75-5 | 3/4 | 5 | 12-3/8 | 1 | 6 | 3/4 | 40 | 10 | 19 |
225676 | JPNX-75-15 | 3/4 | 15 | 12-3/8 | 1 | 6 | 3/4 | 40 | 10 | 24-1/4 |
225615 | JPNX-150-5 | 1-1/2 | 5 | 14-3/8 | 1 | 8 | 7/8 | 48 | 14-1/8 | 32 |
225616 | JPNX-150-15 | 1-1/2 | 15 | 14-3/8 | 1 | 8 | 7/8 | 48 | 14-1/8 | 41 |
225630 | JPNX-300-5 | 3 | 5 | 19-1/4 | 1 | 10 | 5/8 | 84 | 14-1/8 | 52-1/2 |
225631 | JPNX-300-15 | 3 | 15 | 19-1/4 | 1 | 10 | 5/8 | 84 | 14-1/8 | 67-1/4 |