chat now with southern tool
Technical Sales 1–800–458–3687

Phase II PHT-2000 Portable Hardness Test

 

s-h alt

 

Features

  • Is an advanced integrated hardness tester distinguished by its very compact size, high accuracy, wide measuring range and simplicity of operation.

  • It is suitable for testing the hardness of all metals and widely applied in many areas of industry.

  • The PHT-2000 portable hardness tester combines the universal impact device D and a data processor in a single unit.

  • Automatically computes all Vickers, Brinell, Rockwell and Shore hardness values.

  • RS232 output enables this new model to print any of it's memory from up to 2000 locations.

  • The impact direction can be set so that the accurate values can be achieved at any angle, even upside down!

  • Statistical mean value is automatically provided.

  • The measuring method of the PHT-2000 is defined as "the quotient of the impact body's rebound velocity over its impact velocity".

  • Optional accessories include various support rings to meet the requirements of specialized convex or concave applications.

  • External probes are also available for an assortment of applications.

MATERIALS AND TESTING RANGE PHT-2000 (HL:200-900)
MATERIAL HRC HRB HB HV HS
STEEL & CAST STEEL 20-68 60-100 93-674 83-976

32-100

COLD TOOL STEEL 20-67     80-898  
STAINLESS STEEL 20-62 46-100 85-655 85-802  
GREY CAST IRON     93-334    
NODULAR CAST IRON     131-387    
CAST ALUMINUM ALLOYS     27-159    
COPPER/ZINC ALLOYS (BRASS)   13-95 40-173    
CuAI/CuSn ALLOYS (BRONZE)     60-290    
WRAUGHT COPPER ALLOYS     45-315    

Specifications

Dimensions: 6.10" x 2.36" x 1.49" (155 X 60 X 38mm)
Impact Device: D
Impact Energy: 8 Ft-Lbs (11nmm)
Test Tip: Tungsten Carbide
Measuring Accuracy: +- 0.8% (Corresponding To +- 1 Hrc At Hrc=58)
Max. Hardness Of Sample: 980hv
Weight: 0.48lb (220g)
Impact Direction: Any Angle
Operating Temperature: 32 To 122 Degrees F (0 To 50 Degrees C.)
Min. Weight Of Sample: 11 lbs / 5kg
(Less than 5kg To 0.1kg Coupled On Solid Support)
Min. Thickness Of Sample: 0.2in (5mm) (Coupled: 3mm)
Min. Thickness Of Layers: 0.8mm
Min. Radius Of Curved Surface: 1.2in (30mm) (With Support Rings:11mm)
Power: 2- AAA Batteries (supplied)
* Coupling Paste Is Available For Testing Thin or Small Parts Weighing Less Than 2kg

Included Accessories

  • Calibrated Hardness

  • Test Block

  • Plastic Fitted Case

  • Operation Manual

Copyright © 2018 Smith-Hamilton, Inc
0.003 150419 18:39