Phase II Plus Digital Rockwell Hardness
-
The Phase II Digital Rockwell Hardness Tester adopts a micro computer controller to fully automate testing procedures and achieve a level of dynamic precision that is only found
at Phase II.
-
This "state of the art" Hardness Tester offers programmable scale conversions, dwell times, statistical capabilities and test counter.
-
Conforming to ASTM E-18 Rockwell Hardness Standards, this hardness tester presents unmatched repeatability in all Rockwell Hardness scales (see table below).
-
The 900-360 is easy to operate, yet engineered to obtain highly sensitive and extremely accurate readings.
-
A perfect performer suited for any environment including; heat treat facilities, tool rooms, workshops, laboratories and inspection labs.
-
Lifetime technical support is included with all Phase II Hardness Testers.
-
So test away with confidence and a level of accuracy you will only find at Phase II.
Features
-
Fully automated testing procedures affords highly sensitive and accurate readings
-
Micro computer controlled with output to supplied mini printer
-
Offers programmable scale conversions, dwell times, statistical capabilities and test counter
-
Capable of testing in all of the regular Rockwell® scales
|
SPECIFICATIONS
|
|
Minor Load
|
10 Kgf
|
|
Major Load
|
60 Kgf, 100 Kgf, 150 KGF
|
|
Test Force Application
|
Dead Weight
|
|
Test Force Control
|
Motorized
|
|
Results Display
|
Digital Readout
|
|
Vertical Capacity
|
6.7 in.
|
|
Throat Depth
|
6.6 in.
|
|
Height
|
28 in.
|
|
Width
|
8.9 in.
|
|
Depth
|
19.6 in.
|
|
Shipping Weight
|
242 lbs
|
|
ADDITIONAL INFORMATION
|
|
Scale Symbol
|
Indenter Type
Ball dimensions indicate diameter
|
Preliminary Force
N (kgf)
|
Total Force
N (kgf)
|
Typical Application
|
|
A
|
Spheroconical Diamond
|
98.07 (10)
|
588.4 (60)
|
Cemented carbides, thin steel and shallow case hardened steel
|
|
B
|
Ball 1/16" (1.588mm)
|
98.07 (10)
|
980.7 (100)
|
Copper alloys, soft steels, alum. Alloys, malleable iron, etc.
|
|
C
|
Spheroconical Diamond
|
98.07 (10)
|
1471 (150)
|
Steel, hard cast irons,pearltic malleable iron, titanium, deep case hardened steel & other material harder than HRB 100
|
|
D
|
Spheroconical Diamond
|
98.07 (10)
|
980.7 (100)
|
Thin steel and medium case hardened steel and pearlitic malleable iron
|
|
E
|
Ball - 1/8" (3.175mm)
|
98.07 (10)
|
980.7 (100)
|
Cast iron, aluminum & magnesium alloys and bearing metals
|
|
F
|
Ball - 1/16" (1.588mm)
|
98.07 (10)
|
588.4 (60)
|
Annealed copper alloys, and thin soft sheet metals
|
|
G
|
Ball - 1/16" (1.588mm)
|
98.07 (10)
|
1471 (150)
|
Malleable irons, copper-nckel-zinc and cupronickel alloys
|
|
H
|
Ball - 1/8" (3.175mm)
|
98.07 (10)
|
588.4 (60)
|
Aluminum, zinc and lead
|
|
K
|
Ball - 1/8" (3.175mm)
|
98.07 (10)
|
1471 (150)
|
Bearing metals and other very soft or thin materials. Use smallest ball and heaviest load that does not give anvil effect
|
|
L
|
Ball - 1/4" (6.350mm)
|
98.07 (10)
|
588.4 (60)
|
|
M
|
Ball - 1/4" (6.350mm)
|
98.07 (10)
|
980.7 (100)
|
|
P
|
Ball - 1/4" (6.350mm)
|
98.07 (10)
|
1471 (150)
|
|
R
|
Ball - 1/2" (12.70mm)
|
98.07 (10)
|
588.4 (60)
|
|
S
|
Ball - 1/2" (12.70mm)
|
98.07 (10)
|
980.7 (100)
|
|
V
|
Ball - 1/2" (12.70mm)
|
98.07 (10)
|
1471 (150)
|
Accessories
-
C-scale Diamond Indenter
-
1/16" Ball Indenter
-
2- HRC test Blocks
-
1- HRB Test Block
-
Built-in Mini Printer
-
Test Table 5.87" (150mm)
-
Flat Anvil 2.5" (63mm)
-
Spot Anvil .38" (10mm)
-
Std. Vee Anvil
-
Accessory Case
-
Dust Cover
