|
-
The Superficial
Rockwell Hardness Tester comprises "state of the art"
design and dynamic precision only found at Phase II.
-
Used for testing thin and
soft material in the Superficial Rockwell Hardness
scales, this hardness tester utilizes a motor driven
system for control of the major test force application.
-
The 900-340 is ruggedly
engineered to obtain highly sensitive and accurate
readings.
-
Conforming to ASTM E-18
Superficial Rockwell Hardness standards, this hardness
tester will will offer unmatched repeatability in all
Superficial Rockwell Hardness scales (table shown
below).
-
A perfect performer
suited for any environment including heat treat
facilities, tool rooms, workshops, laboratories and
inspection labs.
-
Lifetime technical
support is included with all Phase II Hardness Testers.
-
So test away with
confidence and a level of accuracy you will only find at
Phase II.
Features
- Motor driven system provides
control of test force application
- Direct analog dial reading
- Engineered to obtain highly
sensitive and accurate readings
- Conforms to ASTM E-18
- Perfect for laboratories,
workshops, tool rooms, inspection labs, etc.
- For testing thin, soft material
in the Superficial Rockwell scales (900-340)
|
|
Accessories
|
|
SPECIFICATIONS |
|
Minor Load |
10Kgf |
|
Major Load |
15 Kgf, 30 Kgf, 45 Kgf |
|
Test Force Application |
Dead Weight |
|
Test Force Control |
Motorized |
|
Results Display |
Analog Dial Gage |
|
Vertical Capacity |
6.7 in. |
|
Throat Depth |
6.6 in. |
|
Height |
28 in. |
|
Width |
8.9 in. |
|
Depth |
19.6 in. |
|
Shipping Weight |
190 lbs |
|
|
ADDITIONAL INFORMATION |
|
Scale Symbol |
Indenter Type
Ball dimensions
indicate diameter |
Preliminary Force
N (kgf) |
Total Force
N (kgf) |
Typical Application |
|
15N |
Spheroconical Diamond |
29.42 (3) |
147.1 (15) |
Similar to A,C and D scales, but for thinner gage
material or case depth |
|
30N |
Spheroconical Diamond |
29.42 (3) |
294.2(30) |
|
45N |
Spheroconical Diamond |
29.42 (3) |
441.3(45) |
|
15T |
Ball - 1/16" (1.588mm) |
29.42 (3) |
147.1 (15) |
Similar to B,F and G scales but for thinner gage
materials |
|
30T |
Ball - 1/16" (1.588mm) |
29.42 (3) |
294.2(30) |
|
45T |
Ball - 1/16" (1.588mm) |
29.42 (3) |
441.3(45) |
|
15W |
Ball - 1/8" (3.175mm) |
29.42 (3) |
147.1 (15) |
Very soft material |
|
30W |
Ball - 1/8" (3.175mm) |
29.42 (3) |
294.2(30) |
|
45W |
Ball - 1/8" (3.175mm) |
29.42 (3) |
441.3(45) |
|
15X |
Ball - 1/4" (6.350mm) |
29.42 (3) |
147.1 (15) |
|
30X |
Ball - 1/4" (6.350mm) |
29.42 (3) |
294.2(30) |
|
45X |
Ball - 1/4" (6.350mm) |
29.42 (3) |
441.3(45) |
|
15Y |
Ball - 1/2" (12.70mm) |
29.42 (3) |
147.1 (15) |
|
30Y |
Ball - 1/2" (12.70mm) |
29.42 (3) |
294.2(30) |
|
45Y |
Ball - 1/2" (12.70mm) |
29.42 (3) |
441.3(45) |
|
|
|
There are no further details.
There are no further specifications.
There is no further information.
There are no listed accessories.
