Features
-
The PHASE II UTG-1500 is
a hand held microprocessor controlled thickness gauge
specifically designed for measuring the thickness of
metallic and non-metallic materials such as aluminum,
titanium, plastics, ceramics, glass and any other good
ultrasonic wave-conductor as long as it has parallel top
and bottom surfaces
-
With uses in many areas
of industry, the UTG-1500 can perform precise thickness
measurements on various types of raw materials,
component parts and assembled machinery.
-
It can also be used to
monitor all types of pipes and pressure vessels for loss
of thickness due to corrosion or erosion.
-
The UTG-1500 is extremely
easy to use.
-
After a simple
calibration to a known thickness or sound velocity, the
gauge will give accurate readings in inches or
millimeters
Additional Equipment
|
SPECIFICATIONS |
Display type |
Large 4-digit LCD |
Minimum display unit |
0.001" / 0.1mm |
Measuring range: |
0.003 - 8in. (0.1mm-200mm) in
steel w/standard probe(other values depending on
material) |
Lower limit steel pipes |
Min. dia. 0.8in. x 0.1in. (20mm x
3mm) |
Display accuracy: |
+-0.1mm |
Sound velocity range |
1640 - 29,527 ft/s (500 -
9000m/s) |
Operating temperature |
32-122 degrees F (-5 - 40 degrees
C) |
Frequency |
5MHz |
Update range |
4Hz |
Power supply |
1.5v AA alkaline batteries (4pc) |
Battery life |
Approx. 250 hours / battery set |
Dimensions |
4.9 x 2.6 x 0.9in. (161x 69 x
32mm) |
Weight |
0.7lbs (300g) |
Operating current |
<20mA (3V) |
|
|
|
There are no further details.
There are no further specifications.
There is no further information.
There are no listed accessories.