Technical Sales 1–800–458–3687

Phase II Plus UTG1000 Wall Thickness Gau

UTG Ultrasonic Wall Thickness Guage

Features

  • The PHASE II UTG-1000 is a hand held microprocessor controlled Thickness Gauge specifically designed for measuring the Thickness of metallic and non-metallic materials such as aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave-conductor as long as it has parallel top and bottom surfaces.

  • With uses in many areas of industry, the UTG-1000 can perform precise thickness measurements on various types of raw materials, component parts and assembled machinery

  • It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion or erosion.

  • The UTG-1000 Ultrasonic Thickness Gauge is extremely easy to use.

  • After a simple calibration to a known Thickness or sound velocity, the gauge will give accurate readings in millimeters.

  • Sound velocities for 5 different materials can be pre-set and 10 thickness readings can be stored in the memory

  • Automatic shut off

  • Stores up to 5 velocities of sound

  • Automatic zeroing

  • Rapid review of stored test data

  • Low battery voltage indicator

Additional Equipment

  • Compact durable carry case

  • Probe

  • Coupling gel

  • Operation manual

SPECIFICATIONS
Display type 4-digit LCD
Minimum display unit 0.1mm
Measuring range 0.04-8in. (1.0mm-225mm) in steel w/standard probe(Other values depending on material)
Lower limit steel pipes Min. diameter 0.8in. X 0.1in. (20mm x 3mm
Display accuracy +-0.1mm
Sound velocity range 3280-32805 ft/s (1000-9999m/s)
Operating temperature 32-122 degrees F (-5 - 40 degrees C)
Frequency 5MHz
Update range 4Hz
Power supply 1.5v AA alkaline batteries (2pc)
Battery life Approx. 250 hours / battery set
Dimensions 4.9 x 2.6 x 0.9in. (126 x 68 x 23mm)
Weight 0.4lbs (0.17kg)
Operating current <20mA (3V)
There are no further details.
There are no further specifications.
There is no further information.
There are no listed accessories.
Copyright © 2024 Smith-Hamilton, Inc
0.001 150419 18:39