Technical Sales 1–800–458–3687

Edwards Shop Equipment

Call For the Best - Brother In Law - Delivered Price
on Edwards Ironworkers and Accessories

Ask about our Accessory Deals

Shop Presses Pipe / Tube Bender Hydraulic Pump
Shop Presses Pipe / Tube Bender Portable Power Unit
Horizontal Press Radius Roller Edwards 14-inch Combination Support Stand
Horizontal Press Radius Roller 14-inch Combination Support Stand

 

20 Ton Compact and Powerful Benchtop Press

20 Ton Shop Press

  • Heavy-Duty 3/8 inch Steel Construction
  • Cylinder with 2 inch Ram and 6-1/4 inch Stroke
  • Rolling Cylinder for Maximum Versatility
  • Working Area of 10-1/2 x 20 inch
  • Easy-to-Use Hand/Jog Controls
  • Quick Disconnect Hoses
  • Hydraulic-Assist Table Height Adjustment

Our 20 Ton Shop Press may be small but its no lightweight. Smooth and precise, heavy-duty and versatile, the unique open side design allows for material to pass through. Power it up with an Edwards Ironworker with factory installed Hydraulic Accessory Pack or an Edwards Porta Power 5HP, 2750 psi portable power unit. 

Check out our 12 inch Press Brake Tooling, bump-die tooling, the 6-Piece Press Tooling Set and the Press Brake Back Gauge.

40 Ton Full Size at Half the Price

40 ton press

  • Heavy-Duty 1/2 inch Steel Construction
  • Cylinder with 4 inch Ram and 12-1/4 inch Stroke
  • Rolling Cylinder for Maximum Versatility
  • Working Area of 38 x 40-1/2 inch
  • Easy-to-Use Hand/Jog Controls
  • Quick-Disconnect Hoses
  • Hydraulic-Assist Table Height Adjustment

Our full-sized 40 Ton Shop Press is rugged and economical. Smooth and precise, heavy-duty and versatile, the unique open side design allows for material to pass through. Power it up with an Edwards Ironworker with factory installed Hydraulic Accessory Pack or an Edwards Porta Power 5HP, 2750psi portable power unit. 

With the Press Brake Tooling, your Shop Press easily becomes a brake. Check out our bump-die tooling, the 6-Piece Press Tooling Set and the Press Brake Back Gauge.

60 Ton Shop Press
60 Ton Shop Press

Press the Limit

  • 1/2 inch and 3/4 inch Heavy-Duty Steel Construction
  • Easy-to-Use Foot Pedal
  • Versatile Rolling Cylinder
  • Working Area of 42 inch x 39 inch
  • Pressure Gauge
  • Quick-Disconnect Hoses
  • Hydraulic-Assist Table Height Adjustment
  • 2 V-Blocks Included
Our 60 Ton Shop Press solves a variety of demands to improve users productivity. Smooth and precise, heavy-duty and versatile, our unique, open side design allows for material to pass through. Power it up with an Edwards Ironworker with factory installed Hydraulic Accessory Pack or an Edwards Porta Power 5 HP, 3000 PSI portable power unit. Also available with PLC (Programmable Logic Control) to further increase efficiency.

Improve your productivity with PLC on repeatable actions. Provides adjustable up/down stroke control saving time. Adjustable PSI allows the user to set the pressure and cycle the press with an automatic return. Magnetic base allows easy mounting of the PLC anywhere on the machine.

With the Press Brake Tooling, your Shop Press easily becomes a brake. Check out our bump-die tooling, the 6-Piece Press Tooling Set and the Press Brake Back Gauge.
60 Ton Shop Press General Specifications Edwards Ironworker / Porta-Power
Standard Motor
5 HP 3ph 208 V or 230 V
1725 RPM 14 A
Optional Motors
5 HP 3ph 460 V
1725 RPM 7 A
5 HP 1ph 230 V
1725 RPM 23 A
Hydraulic Pump
 
3-1/2 GPM - 1 Stage
Valve Pressure
2750 PSI
Reservoir
7 Gallons
Rating
60 Tons
Cylinder
4 inch Ram
Stroke
12-1/4 inch
Height
84.3 inch
Width
54 inch
Depth
48 inch
Shipping Weight
1,874 lb
110 Ton Shop Press
110 Ton Shop Press

Our Most Powerful Press

  • Heavy-Duty 3/4 inch Steel Construction

  • Easy-to-Use Foot/Jog Controls

  • Versatile Rolling Cylinder

  • Working Area of 48 inch x 37-1/2 inch

  • Pressure Gauge

  • Quick-Disconnect Hoses

  • Hydraulic-Assist Table Height Adjustment

  • 2 V-Blocks Included

Our 110 Ton Shop Press has the capacity to meet your shops needs. Smooth and precise, heavy-duty and versatile, our unique, open side design allows for material to pass through. Power it up with an Edwards Ironworker with factory installed Hydraulic Accessory Pack or an Edwards Porta Power 5 HP, 3000 PSI portable power unit. Also available with PLC (Programmable Logic Control) to further increase efficiency.

Improve your productivity with PLC on repeatable actions. Provides adjustable up/down stroke control saving time. Adjustable PSI allows the user to set the pressure and cycle the press with an automatic return. Magnetic base allows easy mounting of the PLC anywhere on the machine.

With the Press Brake Tooling, your Shop Press easily becomes a brake. Check out our bump-die tooling, the 6-Piece Press Tooling Set and the Press Brake Back Gauge.
110 Ton Shop Press General Specifications Edwards Ironworker / Porta-Power
Standard Motor
5 HP 3~ 208 V or 230 V
1725 RPM 14 A
Optional Motors
5 HP 3~ 460 V
1725 RPM 7 A

5 HP 1~ 230 V
1725 RPM 23 A
Hydraulic Pump
3-1/2 GPM - 1 Stage
Valve Pressure
2750 PSI
Reservoir
7 Gallons
Rating
110 Tons
Cylinder
4 inch Ram
Stroke
12-1/4 inch
Height
85.4 inch
Width
64 inch
Depth
48 inch
Shipping Weight
2,690 lb

brake

Press Brake Tooling - Turn your press into a brake!

Press Brake tooling is designed for both our 20 Ton and 40 Ton Shop Presses. With clear operating widths of 12, 18, 24 or 32 inches the Press Brake Tooling features our milled, heavy-duty punch and 4-way die block. The robust tooling is mounted to a machined solid steel base and pushblock. Heavy duty springs return the bump brake to its neutral position.

tooling

Press Brake Tooling Set - Press a little here, a little there.

The 6 piece tooling set includes tapered and cutaway push blocks. Installs simply with a ball detent screw to the ram of either the 20 or 40 Ton Shop Press.

 

Press Brake Back Gauge - Make repeatable bends

Our adjustable Press Brake Back Gauge makes for easy set-up of repeatable bends. Simply bolt it up to the Edwards Ironworker Brake Tooling assembly or Press Brake Tooling for our 20 Ton Shop Press and 40 Ton Shop Press, and a simple hand crank glides the carriage backstop to your desired brake location.

20 ton and 40 ton shop presses, brakes and accessories
HAT2000 20 Ton Shop Press (Requires Hydraulic Pump)
HAT4000 40 Ton Shop Press (Requires Hydraulic Pump)
HAT8000 NEW - 60 Ton Shop Press
HAT8050 NEW - 60 Ton Shop Press with PLC
HAT8020 NEW - 60 Ton Shop Press and Porta Power 3 Phase, 230 Volt
HAT8070 NEW - 60 Ton Shop Press with PLC and Porta Power 3 Phase, 230 Volt
HAT8030 NEW - 60 Ton Shop Press and Porta Power 3 Phase, 460 Volt
HAT8080 NEW - 60 Ton Shop Press with PLC and Porta Power 3 Phase, 460 Volt
HAT8010 NEW - 60 Ton Shop Press and Porta Power 1 Phase, 230 Volt
HAT8060 NEW - 60 Ton Shop Press with PLC and Porta Power 1 Phase, 230 Volt
HAT9000 NEW - 110 Ton Shop Press
HAT9050 NEW - 110 Ton Shop Press with PLC
HAT9020 NEW - 110 Ton Shop Press and Porta Power 3 Phase, 230 Volt
HAT9070 NEW - 110 Ton Shop Press with PLC and Porta Power 3 Phase, 230 Volt
HAT9080 NEW - 110 Ton Shop Press with PLC and Porta Power 3 Phase, 460 Volt
HAT9030 NEW - 110 Ton Shop Press and Porta Power 3 Phase, 460 Volt
HAT9010 NEW - 110 Ton Shop Press and Porta Power 1 Phase, 230 Volt
HAT9060 NEW - 110 Ton Shop Press with PLC and Porta Power 1 Phase, 230 Volt
PRB12 12 inch Shop Press (To be used with Edwards 20 Ton or 40 Ton Shop Press) 
PRB18 18 inch Shop Press (To be used with Edwards 20 Ton or 40 Ton Shop Press Requires Hydraulic Pump)
PRB24 24 inch Press Brake (To be used with Edwards 20 Ton or 40 Ton Shop Press Requires Hydraulic Pump)
PRB32 32 inch Press Brake (To be used with Edwards 20 Ton or 40 Ton Shop Press Requires Hydraulic Pump)

 

10Ton-Bender-side.jpg

Tube/Pipe Bender Dies
10 Ton Tube/Pipe Hydraulic Bender Tube and Pipe Dies

10 Ton Tube/Pipe Bender

Powered by the 40Ton (A) through 120Ton (A) Ironworker models, Elite Ironworker Series or our Porta Power, the 10 Ton Tube / Pipe Bender is a quick-connect hydraulic tool that expands your shop without breaking the bank. The Edwards 10Ton Tube / Pipe Bender powers through 2 in ID SCH40 pipe, 2.5 in O.D. tube and 2 in square tube fast and accurately. Features hand-jog operation, auto-stop controls for repeatability and a heavy duty rolling frame with rotating yoke for both horizontal and vertical bending operations.

Our 10 Ton Bender is a quick-connect hydraulic tool to greatly expand your fabrication capabilities. Designed for medium to heavy material

Get Bent!

  • Plug + Play Operation
  • Horizontal or Vertical Operating Positions
  • Proximity Switch Allows Easy, Repeatable Bends
  • Heavy-Duty Rolling Stand
  • Easy-to-Use Hand/Jog Controls

Our 10 Ton Bender is a quick-connect hydraulic tool to greatly expand your fabrication capabilities. Designed for medium to heavy material, the Edwards 10 Ton Bender powers through 2 inch (I.D.) Schedule 40 pipe, 2-1/2 inch (O.D.) tube and 2 inch square tube quickly and accurately. Choose from our over 260 standard Bender Die Sets to get your job done. Call for custom die information and material compatibility requirements.

See links Below for Bender dies pricing page

See below to download dies pdf

Power it up with an Edwards Ironworker with factory installed Hydraulic Accessory Pack or an Edwards Porta Power 5hp, 2750psi, portable power unit.

General Specifications:

  • Heavy Duly All Steel Construction
  • Smooth, Fast operation
  • 180 Degree Bend Capacity
  • Easy To Use Hand Controls
  • Operates Horizontal or Vertically
  • Heavy Duty Rolling and Locking Stand
  • Auto Stop Feature For Repeatable Bends
  • Quick Disconnect Hoses
  • 2in (10) Schedule 40 Pipe Capacity
  • 2-1/2in (00) .095in Tube Capacity
  • 2-1/4in .083in Chromoly Capacity
  • Die Sets Sold Separately
  • One Year Warranty
  • Cylinder 1-3/4in ram
  • Stroke 14in
Edwards 10 Ton Stand Alone Pipe and Tube Bender
HAT1000 10 Ton Tube/Pipe Bender  (Requires Hydraulic Pump Installed on the IW at time of Order OR Stand Alone Hydraulic Pump)
HAT1010 10 Ton Bender and Porta Power 1 Phase, 230 Volt
HAT1020 10 Ton Bender and Porta Power 3 Phase, 230 Volt

Precise and Durable

Our Edwards Bender Dies work solid round, solid square, Schedule 40 pipe, round and square tube. Dies and wipers are precision machined to ensure the highest quality bends. Choose from our over 260 standard Bender Die Sets to get your job done. Call for custom die information and material compatibility requirements.

Die sets

Die sets include:

  • Forming Die
  • Saddle Strap
  • Saddle Bolt
  • Degree Pointer
  • Fine Adjustment Bolt
  • Wiper Mounting Block
  • Brass Wiper Blades (2)
  • Wiper Mounting Bolts (2)
  • Adjustment Set-Screw
GENERAL SPECIFICATIONS EDWARDS IRONWORKER/ PORTA-POWER
Standard Motor 5 HP 3~ 208 V or 230 V 1725 RPM 14 A
Optional Motors 5 HP 3~ 460 V 1725 RPM 7 A
5 HP 3~ 575 V 1725 RPM 6 A
5 HP 1~ 208 V or 230 V 1725 RPM 23 A
Hydraulic Pump 3-1/2 GPM - 1 Stage
Valve Pressure 2750 PSI
Reservoir 7 Gallons
Bend Capacity 180 degree
Pipe Capacity 2 inch (ID) Schedule 40
Tube Capacity 2-1/2 inch (OD) .095 inch
Square Tube Capacity 2 inch (OD) .25 inch
Chromoly Capacity 2-1/4 inch (OD) .083 inch
Cylinder 1-3/4 inch Ram
Stroke 14 inch
Height 40-1/2 inch
Width 36-1/2 inch
Depth 42 inch
Shipping Weight 600 lb

 

Portable Power Unit

THE EDWARDS PORTABLE POWER UNIT IS AN ADDITIONAL POWER SOURCE FOR YOUR EDWARDS POWERLINK HYDRAULIC TOOLS. THE PORTABLE POWER UNIT IS COMPACT, MOBILE, AND IS SET UP TO ACCOMMODATE ALL OF EDWARDS’ QUICK-CONNECT HYDRAULIC ACCESSORY TOOLS AND NOW AVAILABLE OPERATING USING 1PH/120V POWER!

  • Simply PLUG IN and POWER UP any of our Hydraulic Tools and expand your fabrication capabilities
  • Designed to be a stand alone power source for the Edwards Hydraulic Tools, the Portable Power Unit is also a great complimentary option to your Ironworker when your projects demand multiple Hydraulic Tools.

FLEXIBILITY

  • Mobile PowerLink System is a power source to operate all Edwards Hydraulic Tools

PRODUCTIVITY

  • Heavy-duty castors provide easy portability to move around your shop
  • Quick connect couplings are easy to use allowing rapid transitions between Edwards Hydraulic Tools

SAFETY

  • Integrated Lock-out/Tag-out system with E-Stop for added safety

For use on Edwards:

  • 10 Ton Tube and Pipe Benders
  • 20 Ton Hydraulic Shop Press
  • 40 Ton Hydraulic Shop Press
Specifications Porta Power unit
STOCK # HAT007 HAT001 HAT002 HAT003 HAT004 HAT005 HAT006
DESCRIPTION 1 Phase, 120V 1 Phase, 230 V 3 Phase, 230 V 3 Phase, 380 V 3 Phase, 460 V 3 Phase, 575 V 3 Phase, 208 V
MOTOR (HP) 2 5 5 5 5 5 5
AMPS 17 23 14 9.5 7 6 14
RPM 3600 1725 1725 1725 1725 1725 1725
HYDRAULICS
(GPM)
5/2 Two-Stage 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2
HYDRAULICS
(PSI)
2850 3000 3000 3000 3000 3000 3000
RESERVOIR
(GAL)
7 7 7 7 7 7 7
PRODUCT
DIM (IN)
15-1/4 x 37-1/2 x
31-1/4
15-1/4 x 37-1/2 x
31-1/4
15-1/4 x 37-1/2 x
31-1/4
15-1/4 x 37-1/2 x
31-1/4
15-1/4 x 37-1/2 x
31-1/4
15-1/4 x 37-1/2 x
31-1/4
15-1/4 x 37-1/2 x
31-1/4
SHIPPING
DIM (IN)
24 x 48 x 37 24 x 48 x 37 24 x 48 x 37 24 x 48 x 37 24 x 48 x 37 24 x 48 x 37 24 x 48 x 37
PRODUCT
WEIGHT (LBS.)
392 392 392 392 392 392 392
SHIPPING
WEIGHT (LBS.)
400 400 400 400 400 400 400
COUNTRY OF
MAN
USA USA USA USA USA USA USA
Warranty 1 Year Parts 1 Year Parts 1 Year Parts 1 Year Parts 1 Year Parts 1 Year Parts 1 Year Parts
10 Ton Portable Hydraulic Power Unit
HAT001 1 Phase, 230 V
HAT002 3 Phase, 230 V
HAT003 3 Phase, 380 V
HAT004 3 Phase, 460 V
HAT005 3 Phase, 575 V
HAT006 3 Phase, 208 V

Hydraulic Accessory Pack

Transform your Edwards Ironworker into a one-stop fab shop!

This Factory installed Option allows you to quickly connect and power our 10 Ton Bender as well as our 20 Ton and 40 Ton shop presses. An extraordinary way to grow your capabilities without expanding your shop floor or breaking your bank.

Factory Installed Hydraulic Pumos - New Machines ONLY! 
AC400 AC400  -  Factory Installed Hydraulic Accessory Pack Available on new machines only 40 Ton Model Only. 
AC500 AC500  -  Factory Installed Hydraulic Accessory Pack Available on new machines only 50, 55 and 60 Ton Models Only. 
AC600 AC600  -  Factory Installed Hydraulic Accessory Pack Available on new machines only 3 phase, 65, 75 and 100 Ton ModelS Only. (NOT FOR 100 TON DELUXE MODEL) 
AC700 AC700  -  Factory Installed Hydraulic Accessory Pack Available on new machines only 1 phase 65, 75 and 100 Ton ModelS Only. (NOT FOR 100 TON DELUXE MODEL)
AC800 AC800  -  Factory Installed Hydraulic Accessory Pack Available on new machines only 100 Ton Deluxe Model Only. 
AC900 AC900  -  Factory Installed Hydraulic Accessory Pack Available on new machines only 120 Ton Model Only. 

ELITE Model have Factory Installed Hydraulic Pumps Installed as Standard Equipment

edwards horizontal press

Your Go-To Tool

With 20 tons of force, the Edwards Horizontal Press accepts a great variety of tooling to form, brake, and straighten mild steel. This compact powerhouse quickly connects to your Edwards Ironworker with a Hydraulic Accessory Pack or Edwards Porta-Power to greatly expand your fabrication capabilities. Designed for maximum tooling flexibility, the 4 pin locations are locked with a simple crank for inboard tool squaring. The included digital encoder reads positive stop for accurate repeatability within 0.01 inch. The potential of this tool is only limited by your imagination

Features:

  • 20 Tons of Power
  • Digital Readout
  • Hardened Tooling Pins
  • 4 Pin Locations for Tooling Flexibility
  • Smooth Ram Extensions
  • Robust Construction
  • 2 Inch Machine Heavy Duty Table
  • Machined Hardened Bushings

 

6 inch brake 4 way die

Included Tooling : 6 Inch Brake 4 Way Die

The 4 way Brake Set comes standard with the HP20T Horizontal Press. Designed for maximum versatility, the 4 way brake set includes a 6 inch brake holder and a 6 inch punch arbor that allows for braking projects up to 1/2 inch thick x 6 inches tall. The 4 way brake set is easily configured to create clips, brakets, hangers, angles and box geometires quickly and easily.

Specifications Horizontal Press
Standard Motor
5 HP 3~ 208 V or 230 V 1725 RPM 14 A
Optional Motors
5 HP 3~ 460 V 1725 RPM 7 A
5 HP 3~ 575 V 1725 RPM 6 A
5 HP 1~ 230 V 1725 RPM 23 A
  Standard Metric
Hydraulic Pump
3-1/2 GPM - 1 Stage
13.3 LPM - 1 Stage
Valve Pressure
2750 PSI
18960.6 kPa
Reservoir
7 Gallons
26.5 Liters
GENERAL SPECIFICATIONS
Rating
20 Tons
Cylinder
2.25 inch Ram
57.15mm Ram
Stroke
10 inch
254mm
Work Height 38 - 40 inch 965.2mm-1016mm
Table Dimensions
24 x 42 inch
609.6mm x 1066.8mm
Weight
1350 lb
612.35 kg
TOOLING DETAILS
Pin Diameter
2 inch
50.8mm
Dimensions
9.79 inch min to 13.54 inch max
(tool chuck to pin centers)
248.66mm min to 343.91mm max
(tool chuck to pin centers)
Pin Height
6 inch max
(standard tooling)
152.4mm max
(standard tooling)
Tooling Head
1/2 inch T Nut/Set Screw and
American Standard Brake Punch Tooling
12.7mm T Nut/Set Screw and
American Standard Brake Punch Tooling
Horizontal Press
HAT6000 Horizontal Press
Horizontal Press Bundle
HAT6010 Horizontal Press and Porta Power 1 Phase, 230 Volt
HAT6020 Horizontal Press and Porta Power 3 Phase, 230 Volt
HAT6030 Horizontal Press and Porta Power 3 Phase, 460 Volt

 

Edwards Radius Roller

Just Roll With It!

Our Pipe, Tube and Section Radius Roller is another essential quick-connect hydraulic tool. Plug it into your Edwards Ironworker with the Hydraulic Accessory Pack or power it separately with an Edwards Porta-Power to greatly expand your fabrication capabilities. Designed for medium to heavy material, the Edwards Radius Roller powers through your job quickly and accurately. The variable speed hydraulic drive allows you to dial in the appropriate speed for various materials. Quickly change the orientation from vertical for smaller projects to horizontal for those larger, heavier jobs.

Features:

  • Variable Speed
  • Single Pinch / Dual Drive
  • Plug and Play Operation
  • Easy to Use Hand / Jog Controls
  • Horizontal or Vertical Operation
  • Easy Repeatable Rolls
  • Heavy duty Portable Stand
  • Pinch Roll Scales and Lateral Roll Guides
 

 

GENERAL SPECIFICATIONS EDWARDS IRONWORKER/ PORTA-POWER
Standard Motor
5 HP 3~ 208 V or 230 V 1725 RPM 14 A
Optional Motors
5 HP 3~ 460 V 1725 RPM 7 A
5 HP 3~ 575 V 1725 RPM 6 A
5 HP 1~ 230 V 1725 RPM 23 A
  Standard Metric
Hydraulic Pump
3-1/2 GPM - 1 Stage
13.3 LPM - 1 Stage
Valve Pressure
2750 PSI
18960.6 kPa
Reservoir
7 Gallons
26.5 Liters
DIMENSIONS
Height
43 inch
1092.2mm
Width
49 inch
1244.6mm
Depth
49 inch
1244.6mm
GENERAL SPECIFICATIONS
Shaft Diameter
2.0 inch
50.8mm
Shaft Center Distance
14.12 inch
358.6mm
MATERIAL CAPACITIES
Round Pipe
2 inch Schedule 40
50.8mm Schedule 40
Round Tube
2-1/2 inch (.095 inch)
63.5mm (2.41mm)
Square Tube
2 inch (.120 inch)
50.8mm (3.04mm)
Solid Round
1.375 inch
34.92mm
Flat Bar - Easy Way
3 inch (.375 inch)
76.2(19.05mm)
Flat Bar - Hard Way
2.25 inch (.375 inch)
57.15(9.52mm)
Angle Iron
2 inch (.250 inch)
50.8mm(6.35mm)
Radius Roller
HAT5000 Radius Roller
Radius Roller Bundle
HAT5010 Radius Roller and Porta Power 1 Phase, 230 Volt
HAT5020 Radius Roller and Porta Power 3 Phase, 230 Volt
HAT5030 Radius Roller and Porta Power 3 Phase, 460 Volt
15 piece die set for edwards radius roller

The Universal Die Set comes standard with the RPM2. Designed for maximum versatility, the Universal Die Set is easily configured to accept a wide variety of metal sections. Get rollin and work your flats, angle, channel, and square tube with this versatile 15 piece set.

* Special order round tube and pipe dies avaliable upon request

 

EDWARDS 14" COMBINATION HORIZONTAL & V-MATERIAL SUPPORT STAND

EDWARDS 14 inch COMBINATION HORIZONTAL and V-MATERIAL SUPPORT STAND

T Flat Mode

EDWARDS 14 inch COMBINATION HORIZONTAL and V-MATERIAL SUPPORT STAND

V-Material Mode

EDWARDS 14 inch COMBINATION HORIZONTAL and V-MATERIAL SUPPORT STAND

OVERVIEW

Originally designed for use with Edwards products, we quickly realized that this heavy duty roller stand would be a welcome addition to any shop, no matter what brand was being used. This roller stand provides support for up to 500 lbs of material in many different configurations.

FEATURES and BENEFITS

Operates in multiple configurations to be compatible with a variety of materials and machines.

  • Can be used in either a flat T configuration or a V configuration.
  • Accepts a wide variety of materials including flat bar, angle iron, solid rod, tube and pipe or whatever else you are using.
  • Smooth steel rollers for easy movement
  • 500 lbs capacity
  • Fast and easy adjustments for height and roller angle.

T POSITION FOR FLAT MATERIAL SUPPORT

  • Height adjusts in T layout from 30.8 to 49.9 inch
  • Width or rollers in T layout is 14 inch

V POSITION FOR ANGLE IRON OR SOLID ROD SUPPORT

  • Height adjusts in V layout from 31.8 to 51.1 inch
  • V arm length is 4.5 inch

 

SPECIFICATIONS
Model Number AC1980
Weight Max Capacity (lbs.) 500
Height Adjustment Range - T Layout Flat (in.) 30.8 - 49.9
Height Adjustment Range - V Layout (in.) 31.8 - 51.1
Roller Die Width (in.) 8
Roller Die Diameter (in.) 1.9
Product Dimensions (in.) 18.5 x 22.1 x 31.8
Shipping Dimensions 30 x 26 x 7
Product Weight (lbs.) 50 Shipping Weight (lbs.) 55
Edwards 14-inch Combination Support Stand
AC1980 Edwards 14-inch Combination Support Stand

 

ED9-HAT2000
20 TON SHOP PRESS , STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 400 LBS
Mfg. item #: ED9-HAT2000
EDWHAT2000
lease to own for as little as:$91 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$4,549.00

12
ED9-HAT4000
40 TON SHOP PRESS , STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1430 LBS
Mfg. item #: ED9-HAT4000
EDWHAT4000
lease to own for as little as:$175 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$8,749.00

12
ED9-HAT8000
60 TON SHOP PRESS, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1900 LBS
Mfg. item #: ED9-HAT8000
EDWHAT8000
lease to own for as little as:$296 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$14,777.99

12
ED9-HAT8050
60 TON SHOP PRESS WITH PLC, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1900 LBS
Mfg. item #: ED9-HAT8050
EDWHAT8050
lease to own for as little as:$378 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$18,909.00

12
ED9-HAT8020
60 TON SHOP PRESS AND PORTABLE POWER UNIT 3 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2300 LBS
Mfg. item #: ED9-HAT8020
EDWHAT8020
lease to own for as little as:$369 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$18,469.00

12
ED9-HAT8070
60 TON SHOP PRESS WITH PLC AND PORTABLE POWER UNIT 3 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2300 LBS
Mfg. item #: ED9-HAT8070
EDWHAT8070
lease to own for as little as:$463 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$23,169.00

12
ED9-HAT8030
60 TON SHOP PRESS AND PORTABLE POWER UNIT 3 PHASE, 460 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2300 LBS
Mfg. item #: ED9-HAT8030
EDWHAT8030
lease to own for as little as:$392 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$19,599.00

12
ED9-HAT8080
60 TON SHOP PRESS WITH PLC AND PORTABLE POWER UNIT 3 PHASE, 460 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2300 LBS
Mfg. item #: ED9-HAT8080
EDWHAT8080
lease to own for as little as:$470 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$23,499.00

12
ED9-HAT8010
60 TON SHOP PRESS AND PORTABLE POWER UNIT 1 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2300 LBS
Mfg. item #: ED9-HAT8010
EDWHAT8010
lease to own for as little as:$376 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$18,799.00

12
ED9-HAT8060
60 TON SHOP PRESS WITH PLC AND PORTABLE POWER UNIT 1 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2300 LBS
Mfg. item #: ED9-HAT8060
EDWHAT8060
lease to own for as little as:$470 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$23,499.00

12
ED9-HAT9000
110 TON SHOP PRESS, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2200 LBS
Mfg. item #: ED9-HAT9000
EDWHAT9000
lease to own for as little as:$372 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$18,589.00

12
ED9-HAT9050
110 TON SHOP PRESS WITH PLC, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2200 LBS
Mfg. item #: ED9-HAT9050
EDWHAT9050
lease to own for as little as:$437 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$21,859.00

12
ED9-HAT9020
110 TON SHOP PRESS AND PORTABLE POWER UNIT 3 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2600 LBS
Mfg. item #: ED9-HAT9020
EDWHAT9020
lease to own for as little as:$472 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$23,609.00

12
ED9-HAT9070
110 TON SHOP PRESS WITH PLC AND PORTABLE POWER UNIT 3 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2600 LBS
Mfg. item #: ED9-HAT9070
EDWHAT9070
lease to own for as little as:$550 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$27,499.00

12
ED9-HAT9080
110 TON SHOP PRESS WITH PLC AND PORTABLE POWER UNIT 3 PHASE, 460 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2600 LBS
Mfg. item #: ED9-HAT9080
EDWHAT9080
lease to own for as little as:$557 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$27,849.00

12
ED9-HAT9030
110 TON SHOP PRESS AND PORTABLE POWER UNIT 3 PHASE, 460 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2600 LBS
Mfg. item #: ED9-HAT9030
EDWHAT9030
lease to own for as little as:$457 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$22,849.00

12
ED9-HAT9010
110 TON SHOP PRESS AND PORTABLE POWER UNIT 1 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2600 LBS
Mfg. item #: ED9-HAT9010
EDWHAT9010
lease to own for as little as:$466 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$23,299.00

12
ED9-HAT9060
110 TON SHOP PRESS WITH PLC AND PORTABLE POWER UNIT 1 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 2600 LBS
Mfg. item #: ED9-HAT9060
EDWHAT9060
lease to own for as little as:$546 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$27,319.00

12
ED9-PRB12
PRESS BRAKE TOOLING 12 PRESS BRAKE, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 180 LBS
Mfg. item #: ED9-PRB12
EDWPRB12
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$2,259.00

12
ED9-PRB18
PRESS BRAKE TOOLING 18 PRESS BRAKE, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 320 LBS
Mfg. item #: ED9-PRB18
EDWPRB18
lease to own for as little as:$54 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$2,699.00

12
ED9-PRB24
PRESS BRAKE TOOLING 24 PRESS BRAKE, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 420 LBS
Mfg. item #: ED9-PRB24
EDWPRB24
lease to own for as little as:$74 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$3,719.00

12
ED9-PRB32
PRESS BRAKE TOOLING 32 PRESS BRAKE, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 495 LBS
Mfg. item #: ED9-PRB32
EDWPRB32
lease to own for as little as:$99 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$4,949.00

12
ED9-HAT1000
10 TON TUBE/PIPE BENDER , STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 600 LBS
Mfg. item #: ED9-HAT1000
EDWHAT1000
lease to own for as little as:$88 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$4,379.00

12
ED9-HAT1010
10 TON BENDER AND PORTABLE POWER UNIT 1 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1000 LBS
Mfg. item #: ED9-HAT1010
EDWHAT1010
lease to own for as little as:$190 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$9,489.00

12
ED9-HAT1020
10 TON BENDER AND PORTABLE POWER UNIT 3 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1000 LBS
Mfg. item #: ED9-HAT1020
EDWHAT1020
lease to own for as little as:$178 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$8,879.00

12
ED9-HAT001
PORTABLE POWER UNIT 1 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 400 LBS
Mfg. item #: ED9-HAT001
EDWHAT001
lease to own for as little as:$109 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$5,469.00

12
ED9-HAT002
PORTABLE POWER UNIT 3 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 400 LBS
Mfg. item #: ED9-HAT002
EDWHAT002
lease to own for as little as:$108 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$5,389.00

12
ED9-HAT003
PORTABLE POWER UNIT 3 PHASE, 380 VOLT 50HZ, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 400 LBS
Mfg. item #: ED9-HAT003
EDWHAT003
lease to own for as little as:$109 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$5,469.00

12
ED9-HAT004
PORTABLE POWER UNIT 3 PHASE, 460 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 400 LBS
Mfg. item #: ED9-HAT004
EDWHAT004
lease to own for as little as:$105 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$5,259.00

12
ED9-HAT005
PORTABLE POWER UNIT 3 PHASE, 575 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 400 LBS
Mfg. item #: ED9-HAT005
EDWHAT005
lease to own for as little as:$125 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$6,239.00

12
ED9-HAT006
PORTABLE POWER UNIT 3 PHASE, 208 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 400 LBS
Mfg. item #: ED9-HAT006
EDWHAT006
lease to own for as little as:$103 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$5,139.00

12
AC400
++ HYDRAULIC ACCESSORY PACK 40T ACCESSORY PACK
Mfg. item #: AC400
EDWAC400
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$800.00

2530
AC500
++ HYDRAULIC ACCESSORY PACK 50T, 55T & 60T ACCESSORY PACK
Mfg. item #: AC500
EDWAC500
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$800.00

2530
AC600
++ HYDRAULIC ACCESSORY PACK 3PHASE - 65T, 75T, 100T ACCESSORY PACK
Mfg. item #: AC600
EDWAC600
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,100.00

2530
AC700
++ HYDRAULIC ACCESSORY PACK 1PHASE - 65T, 75T, 100T ACCESSORY PACK
Mfg. item #: AC700
EDWAC700
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,100.00

2530
AC800
++ HYDRAULIC ACCESSORY PACK 100T DLX ACCESSORY PACK
Mfg. item #: AC800
EDWAC800
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,100.00

2530
AC900
++ HYDRAULIC ACCESSORY PACK 120T ACCESSORY PACK
Mfg. item #: AC900
EDWAC900
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,100.00

2530
ED9-HAT6000
HORIZONTAL PRESS , STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1500 LBS
Mfg. item #: ED9-HAT6000
EDWHAT6000
lease to own for as little as:$243 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$12,139.00

12
ED9-HAT6010
HORIZONTAL PRESS AND PORTABLE POWER UNIT 1 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1900 LBS
Mfg. item #: ED9-HAT6010
EDWHAT6010
lease to own for as little as:$340 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$16,999.00

12
ED9-HAT6020
HORIZONTAL PRESS AND PORTABLE POWER UNIT 3 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1900 LBS
Mfg. item #: ED9-HAT6020
EDWHAT6020
lease to own for as little as:$328 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$16,399.00

12
ED9-HAT6030
HORIZONTAL PRESS AND PORTABLE POWER UNIT 3 PHASE, 460 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1900 LBS
Mfg. item #: ED9-HAT6030
EDWHAT6030
lease to own for as little as:$354 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$17,699.00

12
ED9-HAT5000
RADIUS ROLLER , STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 994 LBS
Mfg. item #: ED9-HAT5000
EDWHAT5000
lease to own for as little as:$214 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$10,719.00

12
ED9-HAT5010
RADIUS ROLLER AND PORTABLE POWER UNIT 1 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1394 LBS
Mfg. item #: ED9-HAT5010
EDWHAT5010
lease to own for as little as:$318 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$15,899.00

12
ED9-HAT5020
RADIUS ROLLER AND PORTABLE POWER UNIT 3 PHASE, 230 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1394 LBS
Mfg. item #: ED9-HAT5020
EDWHAT5020
lease to own for as little as:$299 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$14,969.00

12
ED9-HAT5030
RADIUS ROLLER AND PORTABLE POWER UNIT 3 PHASE, 460 VOLT, STILL PROUDLY MADE IN THE U.S.A., SHIPS LTL TRUCK FREIGHT, WGT = 1394 LBS
Mfg. item #: ED9-HAT5030
EDWHAT5030
lease to own for as little as:$318 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$15,899.00

12
ED9-AC1980
14COMB HORZ/VERT MATERIAL SUPPORT STAND, STILL PROUDLY MADE IN THE U.S.A., WGT = 55 LBS
Mfg. item #: ED9-AC1980
EDWAC1980
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$411.00

12
Copyright © 2024 Smith-Hamilton, Inc
0.032 240404 13:13