Call 1–800–458–3687 or  Email us!

Huthbender Model 2008 Knee Control Bende

Huth Bender Operations Manual

Huth Segment Set Silhouette Charts

Huth O-Ring Silhouette Charts

Model 2008 is designed for high volume shops that need quick, precise, bending and end finishing.

The 2008 offers the convenience of a knee pedal control and a reduced size control panel. This allows the operator to get closer to the work area for more precision and less fatigue.

The Smart Automatic Mode features an adjustable return-to–home position control. This unique, timesaving feature increases efficiency by assuring fast and easy transitions between multiple bends.

Model 2008 comes with a 5 horse power motor and provides 58,000 LBS of bending force. An optional 7 ½ horse power motor is available for 25% faster bending.

In the automatic mode, the automatic depth-of-bend selector ensures precise bending control through the use of an easy-to-read, easy-to-adjust depth of bend plate.

The heavy duty swager/expander gives you complete end finishing capabilities. The swager end accommodates 1" to 3" tubing. The expander end allows for expansions from 1” to 5 ½”. With Huth’s Accu-Sizer bull’s-eye expanding system, you can dial in precise expansions every time.

The 2008 bender is available with your choice of tooling packages.  For even more savings, order the HB-2008 which is the 2008 bender and 028 die package combination.  

*Shown with optional Ready Rak II

 

Call 1-800-458-3687 For Your Specific Tooling Application

Features:

  • Easy-to–use manual knee pedal control
  • Push button control
  • Automatic Depth-Of-Bend selector
  • Auxiliary on/off switch
  • 58,000 LBS of bending force. Enough for 3” tubing
  • Agricultural Main Cylinder
  • Swager tray
  • Deluxe tool tray
  • Bending die retainer
  • Heavy duty Swager/Expander
  • Rugged I-Beam construction
  • Exclusive safety guard package
  • Front swivel casters w/o brakes
  • 220 volt, 60HZ operation
    *Single phase req. 30 amp service
    *Three phase req. 20 amp service
  • High voltage and high speed options available

End Forming Wizardry With The Swage Box:  

Most Huth and Ben Pearson benders have a long unique looking contraption on one end known as the swage box... It is also featured on our popular 1673 expander/reducer/swaging machine as well. Swage (pronounced swedge) is an uncommon word, and it most commonly refers to forming different shapes with metal tube. The swage box is an extremely handy device for many tube end forming techniques… some think of it as almost magical in that it allows the operator to fabricate a myriad of end-forms.

huth-swage-box

In the swage box, you can do Solid-Tool Expansion with a swage die. The advantage of solid tool expansion is controlled uniformity around the perimeter of the expansion (a segmented expander has microscopic indentations between the expander fingers).

Tube Diameter Reduction is possible in a swage box. This allows fabrication slip fits where one tube is slid inside the other in a way that appears practically seamless from the outside.

Creating Flanges And Flares can be done in the swage box with flange and flare tooling. Want a flange that goes 90 degrees out from the tube end? Simple. Use a 45 degree flare tool to create the 1st 45 degrees, then spin the tool around and push it the remaining 45 degrees until it sticks out perpendicularly from the tube end.  

Doming And Both Male And Female Ball Joint Ends are possible in the swage box. Ball joint connections can be used to help hold two tubes together in a way that allows some movement at the joint.  

One of the keys to forming in the swage box is holding the tube firmly with the collets and collet holder. The forces required to form the new metal shapes are great… 25,000 lbs of force exerted across just a few inches of diameter. We have created a cool time-saving accessory… the dead stop system… to help people locking in the length when making repeated parts.  

On the other end of the swage box is the expanding cylinder. Using segmented tooling and Huth’s unique AccuSizer system, you can quickly and efficiently create slip fits, flares, ball joint connections, AND MORE! Custom Solutions Available Upon Request.  

Let us know how we can help you create end-forming magic with your own swage box!

 

die package

010 Die Package Tooling
Radius Dies
No. Radius Size
5200 * 5 in 2 in
5414 5 in 2-1/4 in
5412 5 in 2-1/2 in
4112 4 in 1-1/2 in
4134 4 in 1-3/4 in
4200 4 in 2 in
4414 4 in 2 1/4 in
3200 3 in 2 in
Back Shoes
No. Pcs. Size
1112 2 1-1/2 in
1134 2 1-3/4 in
1200 2 2 in
4211 2 2-1/4 in
4412 2 2-1/2 in

 
Half shoes
No. Size
1038 1-1/2 in
1040 1-3/4 in
1045 2 in
4416 2-1/4 in
4410 2-1/2 in
Collet Sets
No. Size
1712 1-1/2 in
1734 1-3/4 in
1720 2 in
1725 2-1/4 in
1750 2-1/2 in
Ball Joint Tooling
No. Size
555 1-3/4, 1-7/8, 2 in Female
556 2-1/4, 2-1/2 in Female
Arbor
No. Size
508 1-1/2 to 4 in
498 Tip: 1-1/2 to 1-3/4 in
499 Tip: 1-3/4 to 4 in
Segment Sets
No. Size
473 1-1/2 to 1-3/4 in
474 1-3/4 to 2-1/8 in
475 2-1/8 to 2-1/2 in
Accessories
No. Description
815 Die Holder
816 Die Holding Pin
835 Tube Cutter
853 1-1/2 to 3-1/2 in - Flaring/Flanging Tool
855 Die pins (25)

 

die package

011 Die Package Tooling
Radius Dies
No. Radius Size
5530 * 5 in 3 in
5200 * 5 in 2 in
5414 * 5 in 2 1/4 in
5412 5 in 2-1/2 in
4134 4 in 1-3/4 in
4200 4 in 2 in
4414 4 in 2 1/4 in
4409 4 in 2-1/2 in
3112 3 in 1-1/2 in
3134 3 in 1-3/4 in
3200 3 in 2 in
* Requires 41041 retainer
Back Shoes
No. Pcs. Size
1112 2 1-1/2 in
1134 2 1-3/4 in
1200 2 2 in
4211 2 2-1/4 in
4412 2 2-1/2 in
1350 2 3 in
Half shoes
No. Size
1038 1-1/2 in
1040 1-3/4 in
1045 2 in
4416 2-1/4 in
4410 2-1/2 in
Three-Quarter shoes
No. Size
1046 2 in
4413 2-1/4 in
Swage Dies
No. Size
112 1-1/2 in
134 1-3/4 in
178 1-7/8 in
120 2 in
125 2-1/4 in
150 2-1/2 in
Collet Sets
No. Size
1712 1-1/2 in
1734 1-3/4 in
1720DF 2 in
1725 2-1/4 in
1750 2-1/2 in
Ball Joint Tooling
No. Size
555 1-3/4, 1-7/8, 2 in Female
556 2-1/4, 2-1/2 in Female
Ball Joint Segments
419 2 in
420 2-1/4 in
421 2-1/2 in
Flaring Tool
No. Size
518 2 in Double Flare and
1-1/2 in Flat Flare
Arbor
No. Size
508 1-1/2 to 4 in
498 Tip: 1-1/2 to 1-3/4 in
499 Tip: 1-3/4 to 4 in
Segment Sets
No. Size
473 1-1/2 to 1-3/4 in
474 1-3/4 to 2-1/8 in
475 2-1/8 to 2-1/2 in
476 2-1/2 to 3 in
Accessories
No. Description
825 Quick Disconnect Kit
835 Tube Cutter
853 1-1/2 to 3-1/2 in - Flaring/Flanging Tool
855 Die pins (25)
996 Rotation Dial
950 Program Card System
or
980 Program Card System in Electronic Format



 

die package

013 Die Package Tooling
Radius Dies
No. Radius Size
5112 * 5 in 1-1/2 in
5134 * 5 in 1-3/4 in
5820 * 5 in 2 in 180 deg
5824 * 5 in 2 1/4 in 180 deg
5412 * 5 in 2-1/2 in
5530 * 5 in 3 in
4112 4 in 1-1/2 in
4134 4 in 1-3/4 in
4200 4 in 2 in
4414 4 in 2 1/4 in
4409 4 in 2-1/2 in
3112 3 in 1-1/2 in
3134 3 in 1-3/4 in
3200 3 in 2 in
3414 3 in 2-1/2 in
* Requires 41041 retainer
Back Shoes
No. Pcs. Size
1112 2 1-1/2 in
1134 2 1-3/4 in
1200 2 2 in
4211 2 2-1/4 in
4412 2 2-1/2 in
1350 2 3 in
Half shoes
No. Size
1038 1-1/2 in
1040 1-3/4 in
1045 2 in
4416 2-1/4 in
4410 2-1/2 in
1352 3 in
Three-Quarter shoes
No. Size
1036 1-3/4 in
1046 2 in
4413 2-1/4 in
4415 2-1/2 in
1351 3 in
Swage Dies
No. Size
112 1-1/2 in
134 1-3/4 in
178 1-7/8 in
130 3 in
* For 2, 2-1⁄4, 2-1⁄2 in IDs use male ball joint tools 550, 552, 553
Collet Sets
No. Size
1712 1-1/2 in
1734 1-3/4 in
1720 2 in
1725 2-1/4 in
1750 2-1/2 in
1730 3 in
Ball Joint Tooling
No. Size
550 1-3/4 in - Male
552 2 in - Male
553 2-1/4 in Male
554 2-1/2 in Male
555 1-3⁄4, 1-7⁄8, 2 in - Female
556 2-1⁄4, 2-1⁄2 in - Female
557 1-3⁄4 to 2-1⁄2 in - Domer
558 2-1⁄2 to 2-3⁄4 in - Domer
Flaring Segments 45 degrees
No. Size
440 1-1⁄2 to 2-1⁄2 in
Arbor
No. Size
508 1-1/2 to 4 in
498 Tip: 1-1/2 to 1-3/4 in
499 Tip: 1-3/4 to 4 in
Segment Sets
No. Size
473 1-1/2 to 1-3/4 in
474 1-3/4 to 2-1/8 in
475 2-1/8 to 2-1/2 in
476 2-1/2 to 3 in
Accessories
No. Description
815 Die Holder
816 Die Holding Pin
825 Quick Disconnect Kit
835 Tube Cutter
852 Blank Plate
853 1-1/2 to 3-1/2 in - Flaring/Flanging Tool
855 Die pins (25)
870 O-Rings-Rubber Assist
892 Collet Holder
996 Rotation Dial
950 Program Card System
or
980 Program Card System in Electronic Format




 

die package

016 Die Package Metric Tooling - Export
Radius Dies
No. Radius Size
5040 5 in 40mm
5042 5 in 42mm
5045 5 in 45mm
5048 5 in 48mm
5050 5 in 50mm
5218 5 in 54mm
5060 5 in 60mm
4040 4 in 40mm
4042 4 in 42mm
4045 4 in 45mm
4048 3 in 48mm
4050 4 in 50mm
4218 4 in 54mm
4060 4 in 60mm
3040 3 in 40mm
3042 3 in 42mm
3045 3 in 45mm
3048 3 in 48mm
3050 3 in 50mm
3218 3 in 54mm
Back Shoes
No. Pcs. Size
1340 2 40mm
1342 2 42mm
1345 2 45mm
1348 2 48mm
1349 2 49mm
1218 2 54mm
1360 2 60mm
Reducing Dies
No. Size
760 50mm to 45mm
761 55mm to 50mm
762 65mm to 60mm
Three-Quarter shoes
No. Size
1540 40mm
1542 42mm
1545 45mm
1548 48mm
1550 50mm
1053 54mm
1560 60mm
Swage Dies
No. Size
140 40mm
142 42mm
145 45mm
148 48mm
149 50mm
128 54mm
160 60mm
Collet Sets
No. Size
1740 40mm
1742 42mm
1745 45mm
1700 48mm
1705 50mm
1728 54mm
1760 60mm
Half Shoes
No. Size
1405 40mm
1425 42mm
1455 45mm
1448 48mm
1450 50mm
1051 54mm
1460 60mm
Ball Joint Segments
No. Size
419 50mm
420 55mm
421 60mm
Arbor
No. Size
508 35 to 101mm ID
498 Tip: 35 to 45mm ID
499 Tip: 40 to 101mm ID
Segment Sets
No. Size
473 35 to 45mm ID
474 45 to 54mm ID
475 54 to 64mm ID
476 64 to 76mm ID
Accessories
No. Description
815 Die Holder
816 Die Holding Pin
825 Quick Disconnect Kit
835 Tube Cutter
853 1-1/2 Flaring/Flanging Tool
855 Die pins (40)
870 O-Rings-Rubber Assist
984 Pipe End Shaper
996 Rotation Dial
91176 Ready Rak II









 

die package

028 Die Package Tooling
Radius Dies
No. Radius Size
5530 * 5 in 3 in
5200 * 5 in 2 in
5414 * 5 in 2-1/4 in
5412 * 5 in 2-1/2 in
4200 4 in 2 in
4414 4 in 2-1/4 in
3112 3 in 1-1/2 in
3134 3 in 1-3/4 in
* Requires 41041 retainer
Back Shoes
No. Pcs. Size
1112 2 1-1/2 in
1134 2 1-3/4 in
1200 2 2 in
4211 2 2-1/4 in
4412 2 2-1/2 in
1350 2 3 in
Half Shoes
No. Size
1038 1-1/2 in
1040 1-3/4 in
1045 2 in
4416 2-1/4 in
4410 2-1/2 in

 

Ball Joint Tooling
No. Size
550 1-3/4 in Male **
552 2 in Male ***
553 2-1/4 in Male ****
554 2-1/2 in Male *****
555 1-3⁄4 to 2 in Female
556  2-1⁄4 to 2-1⁄2 in Female
Swage Dies
112 1-1/2 in
134 1-3/4 in
** For a 2 in ID Use Male Ball Tool 550
*** For a 2-1⁄4 in ID Use Male Ball Tool 552
**** For a 2-1⁄2 in ID Use Male Ball Tool 553
***** For a 2-3⁄4 in ID Use Male Ball Tool 554
Collect Sets
No. Size
1712 1-1/2 in
1734 1-3/4 in
1720 2 in
1725 2-1/4 in
1750 2-1/2 in


 

Doming Dies
No. Size
557 2-1/2 in
558 2-3/4 in
Arbor
No. Size
508 1-1/2 to 4 in
498 Tip: 1-1/2 to 1-3/4 in
499 Tip: 1-3/4 to 4 in
Segment Size
No. Size
473 1-1/2 to 1-3/4 in
474 1-3/4 to 2-1/8 in
475 2-1/8 to 2-1/2 in
476 2-1/2 to 4 in
Accessories
853 1-1⁄2 to 3-1⁄2 in Flaring/Flanging Tool
855 Die pins (30)
815 Die Holder
816 Die Holding Pin
870  






 

074 Die package
Arbor and Segments
074 Die Package Tooling -
Use with 1674 Expander Only
No. Type Size
574 * Arbor  2-7/8 to 6 in
572 Arbor  1-3/8 to 1-3/4 in (Solid Piece)
573 Arbor  1-3/4 to 4 in (Solid Piece)
481 Segment  2-7/8 to 3-1/2 in
472 Segment  1-1/2 to 1-3/4 in (Solid Surface)
474 Segment  1-3/4 to 2-1/8 in
475 Segment  2-1/8 to 2-1/2 in
476 Segment  2-1/2 to 3 in
482 Segment  3-3/8 to 4 in
483 Segment  3-7/8 to 4-1/2 in
484 Segment  4-3/8 to 5 in
485 Segment  4-7/8 to 5-1/2 in
486 Segment 5-3/8 to 6 in
* All Sizes are ID


1992 tooling package
1992 3 in Tooling Package
For use on benders with 700 Series or 1700 Series Collets with a clamp style collet holder.
(Standard on all Huth Bender models from
September 1981 to present.)
No. Description
5530 Radius Die - 3 in
1350 Back Shoe (2) - 3 in
1351 Three-Quarter Shoe- 3 in
1352 Half Shoe -3 in
855 Die Pins (6)
892 Collet Holder - 3 in
1730 Collet
853 Flaring/Flanging Tool 1-1/2 to 3-1/2 in
783 Reducer (3  to 2-1/2 in)
130 Swage Die - 3 in
476 * Segment Set (2-1/2 ID to 3 in ID)
*Requires Arbor 508 and Arbor Tip 499 (or) Arbor 573

 

1993 3inch Tolling Package
For use on benders with 200 series collets with either a cam action or spin close style holder.
(Standard on all Huth Bender models from 1955 to September 1981)
No. Description
5530 Radius Die - 3 in
1350 Back Shoe (2) - 3 in
1351 Three-Quarter Shoe - 3 in
1352 Half Shoe - 3 in
855 Die Pins (6)
508 Arbor 1-1/2 to 4 in
499 Arbor Tip 1-3/4 to 4 in
476 Segment Set (2 1/2 ID to 3 in ID)

 
toolling package
1995 2-3/4 inch Tooling Package
For use on benders with 700 Series or 1700 Series Collets with a clamp style collet holder.
(Standard on all Huth Bender models from September 1981 to present.)
No. Description
5534 5 in Radius Die - 2-3/4 in
1234 Back Shoe (2) - 2-3/4 in
1235 Three-Quarter Shoe - 2-3/4 in
1236 Half Shoe - 2-3/4 in
855 Die Pins (6)
1729 * Collet - 2-3/4 in
790 Reducer 3 to 2-3/4 in
129 Swage Die - 2-3/4 in
* Requires 892 Collet Holder
short tooling package
1996 3 inch Short Tolling Package
No. Description
5530 5 in Radius Die - 3 in
1350 Back Shoe (2) - 3 in
855 Die Pins (4)
Choice of one of the following
1351 Three-Quarter Shoe with Pin
1352 Half Shoe with Pin
476 * Segment Set (2-1/2 in ID to 3 in ID)
* Requires Arbor 580 and Arbor Tip 499 (or) Arbor 573
1997 2-3/4 inch Short Tooling Package
1997 2-3/4 inch Short Tooling Package
No. Description
5534 5" Radius Die - 2-3/4"
1234 Back Shoe (2) - 2-3/4"
855 Die Pins (4)
Choice of one of the following:
1235 Three-Quarter Shoe with Pin
1236 Half Shoe with Pin
476 * Segment Set (2-1/2" ID to 3" ID)
* Requires Arbor 508 and Arbor Tip 499 (or) Arbor 573
1988 3 inch End Finishing Package
Designed for benders which utilize 700 or 1700 series collets to perform 3 inch swaging.
No. Description
892 Collet Holder - 3 in
1730 Collet - 3 in
130 Swage Die - 3 in
783 Reducer (3 to 2-1/2 in)
853 Flaring / Flanging Tool (1-1/2 to 3-1/2 in)
1989 1-7/8 inch Optional Package
No. Description
4178 4" Radius Die - 1-7/8 in
178 Swage Die - 1-7/8 in
1178 Back Shoe (2 pcs) - 1-7/8 in
1043 Half Shoe - 1-7/8 in
1778 Collet Set - 1-7/8 in
855 Die Pins (5 pcs)

 
   
   
Model & Accessories
2008 KNEE CONTROL BENDER
010 DIE PACKAGE TOOLING
011 DIE PACKAGE TOOLING
013 DIE PACKAGE TOOLING
016 DIE PACKAGE TOOLING
028 DIE PACKAGE TOOLING  - HB
1992 3 INCH TOOLING PACKAGE
1993 3 INCH TOOLING PACKAGE
1995 2-3/4 INCH TOOLING PACKAGE
1996 3 INCH SHORT TOOLING PACKAGE
1997 2-3/4 INCH TOOLING PACKAGE
1988 3 INCH END FINISHING PACKAGE
1989 1-7/8 OPTIONAL PACKAGE

 

2008
Mfg. item #: 2008
HUT2008
lease to own for as little as:$253 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$12,637.07

79
10
Mfg. item #: 10
HUT010
lease to own for as little as:$66 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$3,277.80

382
11
Mfg. item #: 11
HUT011
lease to own for as little as:$117 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$5,834.26

382
13
Mfg. item #: 13
HUT013
lease to own for as little as:$161 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$8,028.90

382
16
Mfg. item #: 16
HUT016
lease to own for as little as:$143 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$7,171.20

382
28
Mfg. item #: 28
HUT028
lease to own for as little as:$78 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$3,887.10

1992
Mfg. item #: 1992
HUT1992
lease to own for as little as:$50 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$2,516.40

79
1993
Mfg. item #: 1993
HUT1993
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$2,081.70

79
1995
Mfg. item #: 1995
HUT1995
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$2,024.56

79
1996
Mfg. item #: 1996
HUT1996
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,036.80

79
1997
Mfg. item #: 1997
HUT1997
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,036.80

79
1988
Mfg. item #: 1988
HUT1988
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$566.56

79
1989
Mfg. item #: 1989
HUT1989
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$652.96

79
Copyright © 2024 Smith-Hamilton, Inc
0.012 240628 14:06