STANDARD FEATURES EQUIPMENT:
Large 10" x 54" table with 3 T-slots, 5/8", on 2.5" center
Large knee allows saddle to travel over 15" for crossfeedLarge ram allows for over 21" travel with throat from 5.5" to 26.75"
Large Square Ways on Y and Z Axisâ¦â¦â¦â¦. Double locks on all axis
Power quill feed allows for 0.0018, 0.0034, 0.0056 Inches per revolution of spindle
Hardened and ground and precisely scraped work table, saddle and knee ways
Centralized one-shot lubrication pump lubricates all way surfaces and leadscrews
Backlash adjustment for leadscrews, Gib adjustments for ways.
Precision NSK spindle bearings
Electrical cabinet with internal transformer with 24 volt fuse protected controls, 24 volt spindle fan cooling motor, 24 volt halogen machine light. Also has Telemechinique magnetic contactors for flood coolant pump and spindle drive. Internal transformer also includes power supply for digital readout and power table feed. Operator 24 volt controls for spindle drive and coolant pump, with emergency stop button. Spindle off/forward/reverse switch Built in coolant tank base with coolant pump, pressure and return hose , nozzle and valve Installed and ready to use.
Yaskawa infinitely variable speed spindle drive, 5 Horsepower (3.7Kw) powers the three phase induction spindle drive motor from 60 to 2200 RPM for 100% duty cycle. Drive comes preset to 60Hz and can be easily set to 140Hz for up to 5500 RPM, intermittent duty cycle. Spindle induction motor is finned for cooling and has 24 volt fan cooling system.
Kent KT-8 three axis digital readout has 0.0002" resolution. Readout comes mounted to quill, table and cross and is ready to use. The readout is inch/metric switchable, with absolute incremental function. There is a calculator function, bolt hole pattern function, line pattern function, and arc calculate function. A comprehensive manual is included.
Power table feed is Align model AL500SX. Infinitely variable feed from .8 to 32 IPM with rapid button, on/off switch, and adjustable travel stops. This heavy duty power feed has 150 inch pounds of torque, with max to 550. Power table feed comes installed on machine, ready to use Collect Rack, Leveling pads, toolbox and tools, manuals, electrical drawing, test certificate all included.
|Working Surface||10" x 54"|
|Longitudinal Travel||31.25" with powerfeed (36" without powerfeed)|
|Head tilt, left to right||90 degrees left, 90 degrees right|
|Head Tilt, front to back||45 degrees front, 45 degrees back|
|Ram Circular Movement||360 Degree|
|Table To Spindle||16.5"|
|Spindle center to column||5.5" to 26.75"|
|T-Slots||3 @ 2 1/2" centers, 5/8" Ea|
|Spindle Drive||Yaskawa 3.7Kw (5 Horsepower) Variable frequency inverter|
|Spindle Range ( Electronic Variable)||60-5500 RPM with frequency change (Factory preset - 60 Hz for up to 2200 RPM, 100% duty cycle) (User programmable up to140 Hz for up to 5500 RPM, intermittent duty cycle.)|
|Quill Travel & Diameter||5" travel and 3 3/8" diameter|
|Power quill feed range, Inches per rev||0.0018", 0.0034", 0.0056"|
|Weight of Work Piece, max.||660 lbs|
|Spindle Motor||3 HP, 208-240 volt, 3 phase induction drive spindle motor motor- standard|
208-240 volts, 3 phase - standard
440-480 volt transformer - optional
|Machine, Net Weight||3400 lbs|
Call for price. USI3EVH-5
Call for price. USI3EVH-5-KIT
Call for price. USIAL500SX-K
Call for price. USIKT8-K
Call for price. USIML-K