chat now with southern tool
Chat Now!
Call 1-800-458-3687
Monday - Friday 8:00 AM- 7:00 PM ET

 

Save 10% on Select  jet metalworking machinery logo Metalworking Machines
Free Freight on ALL
Jet and Wilton Metalworking and Metalforming Machines.

Edwards Ironworkers

 
Buy Any Edward's Ironworker &
Choose One FREE Accessory Of YOUR Choice Or FREE Freight!

edwards/edwrd_pnchdie_sm.jpg

usa.jpg
FREE: Punch & Die Starter Box-8 Sets: 3/16,5/16,7/16,9/16,11/16,13/16,15/16,1 1/16"  (VALUE $260.00)
With the Purchase of ANY Edwards Iron Worker
Edwards Ironworkers offer the highest tonnage capacity per dollar in the industry. Tight, smooth, dependable hydraulic Ironworkers all operate on the same principle with the center pulling straight down on the work. All tooling moves in a perfect vertical path with no arc of tool against material to be cut or punched. All stations operate as a unit so you can move from punch to shear to notcher to angle shear without changing or adding any new equipment.

Established in 1875, Edwards has been supporting the steel fabrication industry with a full line of high quality, low cost and low maintenance ironworking machines. Long considered the "Swiss Army Knife" of the industry, these do-all machines punch, shear, notch and brake mild steel plate, bar-stock and angle. A wide range of accessories are available to fabricate rod, square stock, sheet metal and pipe.

usa.jpg  Edwards Ironworkers: Hydraulic Ironworking Machines

Edwards logo

8 Pc Punch & Die Kit

FREE: Punch & Die Starter Box-8 Sets:
3/16,5/16,7/16,9/16,11/16,13/16,15/16,1 1/16" 
(VALUE $ 303.00)

We Have Guarnteed in STOCK on our Most Popular Models!

 

Guaranteed in Stock
 Edwards 40 Ton Ironworker
1" dia in 1/2" Plate

 

Edwards 50 Ton Ironworker

1" dia in 5/8" Plate

Our Most Popular IW
Guaranteed in Stock
Edwards 55 Ton Ironworker
1-1/16" dia in 5/8" Plate

 

Compact footprint and affordability make the Edwards 25 Ton JAWS Ironworker the perfect fit for garages or small fab shops. Standard features include a Punch Assembly with Pedestal Die Table and a universal open tooling station to accept a variety of
optional Tooling Accessories

Designed for small to medium-sized fab shops, the Edwards 40 Ton JAWS Ironworker has the tools to get the job done. Standard features include a Punch Assembly with Pedestal Die Table, 10" wide Flat Bar Shear, Angle Shear and a universal open tooling station to accept optional Tooling Accessories

The Edwards 50 Ton JAWS Ironworker is the ideal Ironworker for the small shop that needs a powerful, versatile tool for all kinds of tasks. Standard features include a Punch Assembly with Pedestal Die Table, Flat Bar Shear, Angle Shear and a dedicated Coper Notcher station. The Punch Assembly quickly converts to an open tooling station designed to accept optional Tooling Accessories

The Edwards 55 Ton JAWS Ironworker is well suited to fit the needs of any fab shop, large or small. Standard features include a Punch Assembly with Pedestal Die Table, Flat Bar Shear, Angle Shear and a universal open tooling station designed to accept optional Tooling Accessories

Edwards 60 Ton Ironworker
1" dia in 3/4" Plate

 

 

5 Station ModelEdwards 65 Ton Ironworker
1-1/16" dia in 3/4" PLate

Edwards 75 Ton Ironworker

1-1/16" dia in 7/8" Plate

Edwards 100 Ton IV Ironworker
1-1/16" dia in 1" Plate

 

 

The Edwards 60 Ton JAWS Ironworker is a robust machine featuring a dedicated Coper Notcher station, adding strength and stability to this great tool. Standard features include a Punch Assembly with Pedestal Die Table, 14" wide Flat Bar Shear, Angle Shear and Coper Notcher.

The five workstations of the Edwards 65 Ton JAWS Ironworker give you the power to handle any size job and the flexibility to tailor it to your specific needs. Standard features include a Punch Assembly with Pedestal Die Table, 24" wide Flat Bar Shear, Angle Shear, Coper Notcher and a universal open tooling station designed for optional Tooling Accessories

 

The Edwards 75 Ton JAWS Ironworker offers you greater capacity to accomplish larger tasks. Its standard features include a Punch Assembly with Pedestal Die Table, a 14" wide Flat Bar Shear, Angle Shear and Coper Notcher. The Punch Assembly is easily converted to an open station designed to accept optional Tooling Accessories, allowing flexibility to customize your Ironworker according to your needs.

If you're looking for versatility and power, the Edwards 100 Ton JAWS Ironworker is perfect for your shop. Standard features include a Punch Assembly, a 14" wide Flat Bar Shear, a high capacity Angle Shear and a universal open tooling station designed for optional Tooling Accessories allowing you to select the perfect tool for your needs.

5 STATION MODEL Edwards 100 Ton "DELUXE" V Ironworker
1-1/16" dia in 1" Plate

5 STATION MODEL
Edwards 120 Ton  Ironworker
1-1/2" dia in 1" Plate

4 STATION MODEL
edwards 110 Ton "elite" ironworker

1-3/8" dia. in 1" plate

5 STATION MODEL

edwards 110/65 ton "elite" Dual operator ironworker

1-3/8" dia. in 1" plate

A brute of an Ironworker, the Edwards 100 Ton Deluxe JAWS Ironworker features super-duty construction and a powerful 10hp motor. Standard features include a Punch Assembly, 18" wide Flat Bar Shear, Angle Shear, Coper Notcher and a special built-in Rod Shear for solid square and round bar stock.

Our most powerful Ironworker, the Edwards 120 Ton JAWS Ironworker offers the most in capacity and versatility. Standard features include a Punch Assembly, 24" wide Flat Bar Shear, high capacity Angle Shear, Coper Notcher and a universal open tooling station for optional Tooling Accessories allowing you to select the perfect tool for your needs.

The Edwards ELITE 110 Ironworker sets the standard of design excellence and superior performance with integrated value-added features in this robust new series of Ironworkers.

Standard features include a Punch Assembly, Flat Bar Shear, Angle Shear and a  open tooling station for optional Tooling Accessories  

Designed for simultaneous use by two people, the Edwards ELITE 110|65 Ironworker is the most powerful of the new ELITE line. It features a standard Punch Assembly, 24" wide Flat Bar Shear, Angle Shear, a dedicated Coper Notcher and a universal open tooling station for optional Tooling Acessories

Edwards tooling accessories

Brakes, Coper-Notchers, Pipe Notchers, Back Guage, Punch & Dies Kits, Bar Shears & More

Edwards "NEW" 10 ton pipe & tube bender
For use on 40, 50, 55 & 60 Ton
Ironworkers

Edwards "NEW"  hydraulic pump
For 10 Ton Pipe and Tube Bender, 20 Ton & 40 Ton Shop Press

We offer a wide variety of Edward's Ironworker tooling to maximize the utility & versatility of your Edward's Ironworker.

When ordered with an Edward's Ironworker ALL Tooling ships Free with the Ironworker. 

Our full-sized 40 Ton Shop Press is rugged and economical. Smooth and precise, heavy-duty and versatile, the unique open side design allows for material to pass through. Power it up with an Edwards Ironworker with factory installed Hydraulic Accessory Pack or an Edwards Porta Power 5HP, 2750psi portable power unit.

Our 10 Ton Bender is a quick-connect hydraulic tool to greatly expand your fabrication capabilities. Designed for medium to heavy material, the Edwards 10 Ton Bender powers through 2" (I.D.) Schedule 40 pipe, 2-1/2" (O.D.) tube and 2" square tube quickly and accurately. Choose from our over 260 standard Bender Die Sets to get your job done. Call for custom die information and material compatibility requirements.

Our innovative Hydraulic Accessory Pack option turns your Edwards JAWS Ironworker into a power plant. Simply order your Ironworker with the "A" option to expand your shop with our 10 Ton Bender, 20 Ton Shop Press, and 40 Ton Shop Press.

Edwards manufactures a full line of high quality, low maintenance hydraulic ironworking machines, associated tooling, and accessories that are used in the steel fabrication industry. Our Ironworkers are proudly MADE IN AMERICA with the highest quality American parts and accessories. Edwards Ironworkers Punch, Shear, Notch and Brake mild steel plate, bar-stock and angle. A wide range of accessories are available to fabricate rod, square stock, sheet metal and pipe.
Edward's First Factory Edwards Manufacturing is a family-owned business that has been producing a variety of products since 1875. What began with the manufacture of farm implements, plows and culverts has evolved into one of the premiere manufacturers of ironworking machines, tooling and hydraulic accessory tools in the world.

Today Edwards Manufacturing is primarily driven by its production of Ironworkers. The standard line of Edwards Ironworkers has recently been expanded with the addition of the new Edwards ELITE line. Edwards ELITE Ironworkers boast high-quality design and a host of integrated features. Both lines of Ironworkers are bolstered by our extensive line of Tooling Accessories, giving the user the ability to tailor their Ironworker to their specific needs. The Ironworker line is further complemented by a line of innovative Hydraulic Accessory Tools, powered by an Edwards Ironworker or the Edwards Porta Power, a portable hydraulic power unit. Quickly, easily and economically these tools greatly expand the fabrication capabilities.
Edwards Manufacturing Company will, within one (1) year of date of original purchase (proof of purchase required), replace F.O.B. the factory, any goods, excluding punches, dies and shear blades, which are defective in materials or workmanship provided that the buyer return the defective goods, freight pre-paid, to the seller, which shall be the buyer's sole and exclusive remedy for the defective goods. Hydraulic components are subject to their manufacturer's warranty.

Edwards Manufacturing Company will, within thirty (30) days of date of original purchase (proof of purchase required), replace F.O.B. the factory, any punches, dies and/or shear blades, which are defective in materials or workmanship.

This warranty does not apply to machines and/or components which have been altered, changed or modified in any way, or subjected to abusive and abnormal use, inadequate maintenance and lubrication, or subjected to use beyond seller recommended capacities and specifications. Edwards Manufacturing Company shall not be liable for labor costs expended on such goods or consequential damages. Edwards Manufacturing Company shall not be liable to the purchaser or any other person for loss, down-time, or damage directly or indirectly arising from the use of the goods or from any other cause. No officer, employee, or agent of Edwards Manufacturing Company is authorized to make any oral representations or warranty of fitness or to waive any of the foregoing terms and none shall be binding on Edwards Manufacturing Company.

Southern Tool a Prefered Vendor of Edward's IronWorkers Since 2005

There are no further details.
There are no further specifications.
There is no further information.
There are no listed accessories.

  • Hours: Monday - Friday
    8:00 AM to 7:00 pm Eastern
  • Toll Free: 1-800-458-3687
    786-866-9865

  • Fax: 865-376-9792
  • American Express American Express American Express
  •  
Copyright © 2014 Smith-Hamilton, Inc
0.002 1528 01:02:16