DIRECT DRIVE ROUND COLUMN DRILL PRESS WITH MECHANICAL CLUTCH
STANDARD FEATURES
-
Two speed forward and reverse switch
-
Mechanical Powerfeed clutch engagement
-
Heavy duty quill and spindle
-
Tempered, ground spindle with internal taper mounted
in precision bearings for maximum accuracy,
minimizing deflection
-
Speed and feed selectors are located on one side of
the drill head for convenience and ease of operation
-
Oversized base is precision ground with T-slots for
added versatility and stability
-
Spindle gear box is equipped with steel hardened,
ground, shafts and gears
-
Spindle gear box is internally lubricated in a
continuous oil bath for long term smooth operation
-
Tilting table, 45° left and right
-
Powerfeed can be disengaged manually
|
STANDARD EQUIPMENT
-
Automatic tool ejector
-
Manual quill lock
-
Coolant system
|
|
STOCK NUMBER |
2350 |
Size (in.) |
28 |
Cast Iron Drilling Capacity (in.) |
1-7/8 |
Steel Drilling Capacity (in.)
|
1-3/4 |
Cast Iron Tapping Capacity (in.) |
1-3/4 |
Steel Tapping Capacity (in.)
|
1-9/16 |
Quill Diameter (in.) |
3.228 |
Distance Spindle to Column (max/in.)
|
14 |
Number & Range of Spindle Speeds (RPM)
|
9 (82, 120, 180, 240, 354, 528,
678,1026,1524) |
Automatic Feeds (in.) |
.004, .008, .012, .016 |
Spindle Travel (in.) |
9 |
Spindle Distance to Base (in.) |
49 |
Spindle Distance to Table (min./in.)
|
2.67 |
Spindle Distance to Table (max./in.) |
30-1/2 |
Table Size (in.) |
22x19 |
T-Slot Size (in.) |
1/2 |
Work Table Capacity (lbs) |
400 |
Spindle Taper |
4MT |
Base Slots Size (in. |
5/8 |
Motor |
3HP, 220/440V, 3Ph* |
Floor Space Required (in./ L x W x H)
|
40x30x95 |
Net Weight (lbs) |
1840 |
* 110V at the switch with Mechanical
Clutch |
|
|
|
|
There are no further details.
There are no further specifications.
There is no further information.
There are no listed accessories.