Technical Sales 1–800–458–3687

Baileigh MB-350 Mandrel Tubing Bender

Mandrel Tubing Bender MB-350
Click image to enlarge

This mandrel tubing bender has a tube bending capacity that may vary depending on OD (outside diameter), WT (wall thickness), CLR (centerline radius), material (aluminum, mild steel, aluminum, chromoly, etc.), and supply of material. RMD retains the right to amend designs to our tube benders from time to time without any prior notice. The buyer must provide 10 pieces of test bending material for each different die and mandrel size specified. The exhaust bender will be tested with tooling and material before shipment. Manufacturer reserves the right to hold shipment until successful testing has been performed. If desired, factory onsite training can be hired. Baileigh Industrial's mandrel benders provide quality, precision and ease of operation at reasonable prices.

Applications:

  • The MB-350 Mandrel Exhaust Bender is the perfect bending machine for bending tight radi (down to 1-1/2 times the OD) of round tube and pipe, as well as square tubing. This mandrel bender was designed specifically for the small fabricator who wants an exhaust bender for bending from 1 up to 3 inch OD in mild and stainless steel. We invested heavily in coming up with the right design allowing this machine to be extremely user friendly, and forgiving of slight changes in material.
  • Besides mandrel bending exhaust pipe this bending machine would be used for bending auto and bike chassis, auto aftermarket accessories, hand railing and much more.
  • This mandrel exhaust bender is good for small to medium production runs. The simple design, heavy construction and easy to use operator interface allows for quick change overs, quality bends and descent production cycles.

Includes:

  • Touch screen operator interface with capability to program up to 140 programs, with up to 10 bends per program.
  • 10 Foot Extraction Table
  • Rotary positioning carriage with 4 manual stops.
  • Tooling is additional per customers bending requirements. Tooling changes for different materials, wall thickness and center line radius. Set up of tooling consists of: 1 - Rotary Bending Die; 2 - Clamp Die; 3- Pressure Die; 4 - Mandrel; 5 - Wiper Die

Max Bending Strength Capacity:

  • Round Mild Steel - 3 inch OD x .125 inch Wall
  • Round Aluminum - 3 inch OD x .188 inch Wall
  • Round Stainless - 3 inch OD x .065 inch Wall
  • Square Mild Steel - 2x2x0.188 inch Wall
  • Solid Bar Mild Steel - 1.181 inch OD

Additional Specifications:

  • Right handed mandrel pipe bender
  • Single Stack Tooling
  • Bend axis is driven by electrical mechanical drive system. Linear feed and plane of bend rotation are by rotary degree positioning carriage with linear scale and 4 manual linear stops.
  • User friendly touch screen interface allows for storage of programs, speed of bend changes, amp meter readings, counter for number of bends, and spring back values.
  • Clamp die has hydraulic and mechanical locking system that reduces the possibility of slippage.
  • Mandrel extractor uses powerful hydraulic system to insert, hold, and extract the mandrel. Also employed is an adjustable mandrel positioning device.
  • Follower die is positioned and held tight against rotary die and wiper die.
  • Foot pedal control works in conjunction with touch screen instructions. On screen safeties ensure improper operations can not be completed.
  • Maximum Bend Radius - 12 inch CLR
  • Maximum Angle - 190 degree
  • Maximum Length over Mandrel - 10 inch
  • Bending Speed (DOB) - 18 degrees per second
  • Accuracy of DOB - +/- 0.50 degree
  • Machine Weight - 2100 lb
  • 220V x 60Hz x 3 Phase
Specifications
Model MB-350
Capacity Round (Mild Steel)
3.0 od x .120 wall
Capacity (Stainless Steel)
3.0 od x .065 wall
Square Tube (SS  MS)
2.0 x 2.0 x .120 wall
Min Practical Material Diameter
1.0 dia
Max CLR
9.0 clr
Min CLR
1.5 x dia
Bend Direction
Clockwise
Max Bend Angle
200 degrees
Max Bend Speed
180 degrees in 16 seconds
Bending HP
4 hp
Hydraulic HP
5 HP
Max Hydraulic Pressure
3000 psi
Voltage
230V, 60 Hz, 3-phase
Weight
4000 lbs
Mandrel Rod Size
1.0 dia x 1 inch-8 thread
Index Table Length
10 ft
Index Chuck Thru Hole
2.4 dia

No accessories listed

BA9-350MANDRELB
220V 3PH MANDREL TUBE AND PIPE BENDER. 3 ROUND CAPACITY, TOUCH SCREEN OPERATOR INTERFACE / MADE IN U.S.A. / WGT = 4000 LBS / SHIPS LTL TRUCK FREIGHT (SKU 1005403)
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR BEST BROTHER-IN-LAW PRICE & FREE SHIPPING
Mfg. item #: BA9-350MANDRELB
BAIMB-350
lease to own for as little as:$978 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$52,739.00

38
Copyright © 2024 Smith-Hamilton, Inc
0.003 150419 18:39