Edwards Elite 68 Ton Ironworker

Picture

elite 68 ironworker

At a Glance
SPECIFICATIONS
Specs - metric
punches and dies
Accessories
new items

Open to a Greater Range of Tooling

9 inch Open Height and 2-1/16 inch Stroke
ANSI B11.5-1988R(02) Compliant
ETL/UL Approved Controls
ELITE Integrated Features:
- Hydraulic Hold-Down
- E-Stop / Lockout-Tagout
- Electric Stroke Control
- Hydraulic Accessory Pack
- Central Lubrication System
- Swing-Away Stripper Assembly
- Roller Encoder Measuring System
- Quick Change Punch Assembly
- Premium Gauging Tables
- LED Lighting

The Edwards ELITE 68 Ironworker offers all of the innovative features, superior performance and robust construction of the ELITE 110 and the ELITE 110|65. The distinguishing characteristic of the ELITE 68 can be found at the open station where unique features of a 9" open height and 2-1/16" stroke accommodate a huge range of tooling.

Standard features of the ELITE 68 include a Punch Assembly with Pedestal Die Table, Flat Bar Shear, Angle Shear and a universal open tooling station for optional Tooling Accessories. Integrated hydraulic accessory ports enables your ELITE 68 to act as a power source for our expanding line of innovative Hydraulic Accessory Tools.

Limited Offer FREE: Punch & Die Starter Box-8 Sets: 3/16,5/16,7/16,9/16,11/16,13/16,15/16,1 1/16"
(VALUE $303.00)

PUNCH
Rating	68 Tons
Max. Capacity	1-1/8 inch Dia. in 3/4 inch A36 (65,000 PSI Tensile)
Stroke	2-1/16 inch
Throat Depth	10 inch
Open Height	9 inch
Shut Height	6-7/8 inch
Work Height	44-1/8 inch

FLAT BAR SHEAR
Max. Capacity	1/2 x 14 inch 5/8 x 12 inch
Max. Round	1-1/8 inch
Max. Square	1-1/8 inch
Work Height	41 inch

ANGLE SHEAR
Max. Capacity	5 x 5 x 3/8 inch
Work Height	51-5/16 inch

OPTIONAL COPER NOTCHER
Max. Capacity	2-1/2 x 6 x 3/8 inch
Work Height	47-1/2 inch

OPEN STATION
Throat Depth	12 inch
Open Height	9 inch
Shut Height	6-7/8 inch
Stroke	2-1/16 inch

GENERAL SPECIFICATIONS
Standard Motor	7.5 HP 3 Phase 208/240v 1765 RPM 21 AMP
Optional Motors	7.5 HP 3 Phase 440/480v 1765 RPM 12 AMP 7.5 HP 3 Phase 575v 1770 RPM 8 AMP 7.5 HP 1 Phase 208/240v 1765 RPM 36 AMP
Hydraulic Pump	10-1/2 GPM - 2 Stage
Valve Pressure	3000 PSI
Reservoir	17 Gallons
Cylinder	3-1/2 inch Ram

DIMENSIONS
Height	64-3/16 inch
Width	50-1/2 inch
Depth	41-1/2 inch
Shipping Weight	4600 lb

Click to View Spec Sheet

PUNCH
Rating	68 Tons
Max. Capacity	29mm Dia. in 19mm A36
Stroke	52mm
Throat Depth	254mm
Open Height	229mm
Shut Height	175mm
Work Height	1121mm

FLAT BAR SHEAR
Max. Capacity	13mm x 356mm 16mm x 305mm
Max. Round	29mm
Max. Square	29mm
Work Height	1041mm

ANGLE SHEAR
Max. Capacity	127mm x 127mm x 10mm
Work Height	1303mm

OPTIONAL COPER NOTCHER
Max. Capacity	64mm x 152mm x 13mm
Work Height	1207mm

OPEN STATION
Throat Depth	305mm
Open Height	229mm
Shut Height	175mm
Stroke	52mm

GENERAL SPECIFICATIONS
Standard Motor	7.5 HP 3 Phase 208/240v 1765 RPM 21 AMP
Optional Motors	7.5 HP 3 Phase 440/480v 1765 RPM 12 AMP 7.5 HP 3 Phase 575v 1770 RPM 8 AMP 7.5 HP 1 Phase 208/240v 1765 RPM 36 AMP
Hydraulic Pump	39.7 LPM - 2 Stage
Valve Pressure	20684.3 kPa
Reservoir	64.4 Liters
Cylinder	89mm Ram

DIMENSIONS
Height	1630mm
Width	1283mm
Depth	1054mm
Shipping Weight	2086.5 kg

Click to View Spec Sheet

S T A N D A R D P U N C H E S and D I E S
Please Call 800-458-3687 To Place an Order for items listed Below! Special Order Items! Delivers usually Ground UPS in 1 Week
Punch and Die Starter Box - #E08-00	(8 sets: 3/16 to 1-1/16 inch)	$239.00
Hex Punch and Die up to 29/32 inch	Set: one punch, one die	$183.46
Oblong Punch and Die up to 1-1/16 inch	Set: one punch, one die	$122.30
Rectangular Punch and Die up to 5/8 x 7/8 inch	Set: one punch, one die	$245.78
Round Punch and Die up to 1-1/16 inch	Set: one punch, one die	$34.95
Square Punch and Die up to 3/4 inch	Set: one punch, one die	$108.19
O V E R S I Z E P U N C H E S and D I E S
Round Punch and Die up to 1-9/16 inch	Set: one punch, one die	$56.45
Square Punch and Die up to 1-1/16 inch	Set: one punch, one die	$176.40
Oblong Punch and Die up to 1-9/16 inch	Set: one punch, one die	$210.50
Hex Punch and Die up to 1-1/4 inch	Set: one punch, one die	$245.78
2 4 1 P U N C H E S and D I E S
241 Round Punch and Die 1 to 2 inch	Set: one punch, one die	$296.35
241 Round Punch and Die 2-1/32 to 2-1/2 inch	Set: one punch, one die	$329.28
241 Round Punch and Die 2-17/32 to 3 inch	Set: one punch, one die	$362.21
241 Round Punch and Die 3-1/32 to 3-1/2 inch	Set: one punch, one die	$408.07
241 Round Punch and Die 3-17/32 to 4 inch	Set: one punch, one die	$435.12
NOTES: All punch & die sets are available in 1/32 inch increments and are shipped with a 1/32 inch die clearance unless otherwise noted. Refer to punch & die list for all other shapes and sizes. All shaped punches are shipped with keyway and drill spots. Prices subject to change without notice. Custom Punch and Dies are available.

Punches and Dies
Standard ROUND		Oversize ROUND		Metric ROUND
Punch	Die	Punch	Die	Punch	Die
1/8 inch	5/32 inch	1 inch	1-1/32 inch	4mm	4.8mm
5/32 inch	3/16 inch	1-1/32 inch	1-1/16 inch	5mm	5.8mm
3/16 inch	7/32 inch	1-1/16 inch	1-3/32 inch	6mm	6.8mm
7/32 inch	1/4 inch	1-3/32 inch	1-1/8 inch	7mm	7.8mm
1/4 inch	9/32 inch	1-1/8 inch	1-5/32 inch	8mm	8.8mm
9/32 inch	5/16 inch	1-5/32 inch	1-3/16 inch	9mm	9.8mm
5/16 inch	11/32 inch	1-3/16 inch	1-7/32 inch	10mm	10.8mm
11/32 inch	3/8 inch	1-7/32 inch	1-1/4 inch	11mm	11.8mm
3/8 inch	13/32 inch	1-1/4 inch	1-9/32 inch	12mm	12.8mm
13/32 inch	7/16 inch	1-9/32 inch	1-5/16 inch	13mm	13.8mm
7/16 inch	15/32 inch	1-5/16 inch	1-11/32 inch	14mm	14.8mm
15/32 inch	1/2 inch	1-11/32 inch	1-3/8 inch	15mm	15.8mm
1/2 inch	17/32 inch	1-3/8 inch	1-13/32 inch	16mm	16.8mm
17/32 inch	9/16 inch	1-13/32 inch	1-7/16 inch	16.5mm	17.3mm
9/16 inch	19/32 inch	1-7/16 inch	1-15/32 inch	17mm	17.8mm
19/32 inch	5/8 inch	1-15/32 inch	1-1/2 inch	18mm	18.8mm
5/8 inch	21/32 inch	1-1/2 inch	1-17/32 inch	19mm	19.8mm
21/32 inch	11/16 inch	1-17/32 inch	1-9/16 inch	20mm	20.8mm
11/16 inch	23/32 inch	1-9/16 inch	1-19/32 inch	20.5mm	21.3mm
23/32 inch	3/4 inch	Standard OBLONG		21mm	21.8mm
3/4 inch	25/32 inch	Punch	Die	22mm	22.8mm
25/32 inch	13/16 inch	1/4x1/2 inch	9/32x17/32 in	23mm	23.8mm
13/16 inch	27/32 inch	9/32x9/16 inch	5/16x19/32 in	24mm	24.8mm
27/32 inch	7/8 inch	3/16x3/4 inch	7/32x25/32 in	24.5mm	25.3mm
7/8 inch	29/32 inch	1/4x3/4 inch	9/32x25/32 in	25mm	25.8mm
29/32 inch	15/16 inch	5/16x3/4 inch	11/32x25/32 in	26mm	26.8mm
15/16 inch	31-32 inch	7/16x3/4 inch	15/32x25/32 in	Standard SQUARE
31/32 inch	1 inch	9/16x3/4 inch	19/32x25/32 in	Punch	Die
1 inch	1-1/32 inch	3/8x3/4 inch	13/32x25/32 in	1/4 inch	9/32 inch
1-1/32 inch	1-1/16 inch	1/2x3/4 inch	13/32x25/32 in	5/16 inch	11/32 inch
1-1/16 inch	1-3/32 inch	13/32x13/16 inch	7/16x27/32 in	11/32 inch	3/8 inch
Standard HEX		3/16x1 inch	7/32x1-1-3/32 in	3/8 inch	13/32 inch
Punch	Die	1/4x1 inch	9/32x1-1-3/32 in	13/32 inch	7/16 inch
3/8 inch	13/32 inch	9/32x1 inch	5/16x1-1-3/32 in	7/16 inch	15/32 inch
7/16 inch	15/32 inch	5/16x1 inch	11/32x1-1-3/32 in	15/32 inch	1/2 inch
15/32 inch	1/2 inch	11/32x1 inch	3/8x1-1-3/32 in	1/2 inch	17/32 inch
1/2 inch	17/32 inch	3/8x1 inch	13/32x1-1-3/32 in	17/32 inch	9/16 inch
17/32 inch	9/16 inch	13/32x1 inch	7/16x1-1-3/32 in	9/16 inch	19/32 inch
9/16 inch	19/32 inch	7/16x1 inch	15/32x1-1-3/32 in	19/32 inch	5/8 inch
19/32 inch	5/8 inch	1/2x1 inch	17/32x1-1-3/32 in	5/8 inch	21/32 inch
5/8 inch	21/32 inch	17/32x1 inch	9/16x1-1-3/32 in	21/32 inch	11/16 inch
11/16 inch	23/32 inch	9/16x1 inch	19/32x1-1-3/32 in	11/16 inch	23/32 inch
23/32 inch	3/4 inch	5/8x1 inch	21/32x1-1-3/32 in	12/32 inch	3/4 inch
3/4 inch	25/32 inch	11/16x1 inch	23/32x1-1-3/32 in	3/4 inch	25/32 inch
25/32 inch	13/16 inch	3/4x1 inch	25/32x1-1-3/32 in	** 25/32 inch	16/16 inch
		13/16x1 inch	27/32x1-1-3/32 in	** 13/16 inch	27/32 inch
		5/16x1-1/16 in	11/32x1-1-3/32 in	Part number 0222-02 Notched Coupling Nut Required
		3/8x1-1/16 in	13/32x1-1-3/32 in	Part number 0222-02 Notched Coupling Nut Required
		9/16x1-1/16 in	19/32x1-1-3/32 in
		11/16x1-1/16 in	23/32x1-1-3/32 in
		13/16x1-1/16 in	27/32x1-1-3/32 in

Edwards Ironworkers are used in all types of steel fabrication. As a time saving alternative to any saw, all standard Ironworker models may be fitted with optional accessory tooling to help you make the most of your time and money. From heavy structural steel building components to delicate ornamental ironwork; trailer building, to the Discovery Channels Biker Build-Off 2006, Edwards Ironworkers are the most versatile, time saving tool in any fabrication shop.

Click Below For Edwards Tooling Accessories


Punch / Die Starter Set	Gauging Table Kit	Heavy Duty Gauging Table Kit	Stripper Reducing Plate	Urethane Stripper

Pedestal Die Table	Oversize Punch Assembly	241 Punch Assembly	Angle Notcher	Coper Notcher

Pipe Notcher	Turrent Pipe Notcher	Multi Shear	Rod Shear and Housing	Brake Tooling

48 inch Auto Cut	48 Inch Back Gauge	Fabricators Protractor	Press Brake Back Gauge

10 Ton Tube and Pipe Bender	20 Ton and 40 Ton Shop Press & Brake	Stand Alone and Factory Installed Hydraulic Pump for Benders and Presses

Click on Picture above to be redirected to these items