Technical Sales 1–800–458–3687

Master Craft Lifts Truck Mounted Backhoe

The Master Craft Truck-Mounted Backhoe is especially suited to a wide variety of utility companies, pipeline companies, municipalities, and contractors. This unit is ideal for jobs requiring speed to the job site and full mobility. The Master Craft TMB is a completely factory-assembled unit with complete platform and backhoe mounted on customer-specified truck.

The Master Craft TMB is a 15 ft. backhoe with 2 lever controls—consisting of boom; dipperstick; double-acting lift, crowd and bucket cylinders; swing system; 11 feet 3 inch wide stabilizers; console including hydraulic controls; stop switch and operator's seat with black vinyl cover.

Master Crafts TMB consists of right and left side steps at front of platform; hydraulic reservoir with externally mounted filter; transport cradle; tilt control and operator's seat actuated diverter valve; two double-acting tilt cylinders and linkage; working lights for night operation (two on platform and one on dipperstick); lockable storage compartment; transmission driven PTO, hydraulic pump and diverter control valve (38 gpm capacity at 1400 rpm): all hydraulic fittings and plumbing plus truck frame attaching parts.


  • Remote throttle control
  • Remote stop switch
  • Black vinyl backhoe seat
  • Truck frame attaching parts
  • Safety tread platform
  • Frame and fenders
  • Transport tilt cylinders, control valve, plumbing, tilt frame, and tie bars
  • Backhoe transport cradle
  • Hydraulic pump, reservoir and plumbing and external oil filter
  • Diverter control valve
  • Lockable storage compartment
  • Working lights for night operation (two platform and one dipstick light)
  • Power tal
  • Backhoe stabilizer pads

Trucks and backhoe makes and models as available. (Must meet Master Craft specifications.)


  • Special paint to match fleet requirements
  • Amber beacon
  • Spotlight
  • Bucket crane
  • Rear cab protector

The backhoe seat must be in store position at the front left corner of the truck before backhoe can be tilted. This safety feature prevents accidental tilting of the backhoe while operator is seated in the backhoe position.

NOTE: Because of our policy of continual engineering research and improvement we reserve the right to make changes in design, specifications and components without notice, but always subject to the Master Craft written warranty.

Model Any basic 2-1/2 ton cab-chassis. The rear of the truck frame from rear axle back must be completely empty to allow for the backhoe to go into the operating position and brake chambers must be forward of rear axle. Cruise control with RPM increase/decrease switch interface with wires to end of frame and park brake and neutral interlock required. An electronic tachometer to 3000 RPM is also required.
Wheelbase 129 inch Minimum to 141 inch Maximum
Cab to Axle Distance 60" Minimum to 72" Maximum
Frame Size 50,000 PSI (equivalent or better)
8.28" x 2.75" x 0.25" 18.0 section modulus (SM) with inverted L
Front Axle Spicer I-80 or equivalent with a weight rating of 8,000 lbs or more
Drive Axle Spicer N-175 or equivalent with a weight rating of 17,500 lbs or more


Front: 9,000 lb capacity leafsprings with telescoping shock absorbers or equivalent
Rear: 23,500 lb capacity leafsprings with 4,500 lb cap auxiliary springs or equivalent


10R-22.5-10 ply rating Steel Belted Radials on painted steel disc wheels


Hydro-Max II hyrdaulic system or equivalent (contact Master Craft for required specs of air brakes)


Power steering preferred

Exhaust System


Single vertical exhaust at RH rear of cab


Power: Must match or exceed required specs of the transmission used - engine hour meter, QB-3 shutdown system or equivalent, largest radiator available from manufacturer


Allison MD 3560 automatic transmission (or equivalent) with PTO capabilities
Eaton Fuller FS-6406A manual transmission (or equivalent) with PTO capabilities

Fuel Tanks


Fuel tanks must not extend past the back of the cab

Hydraulic Capacity


40 gal.

Hydraulic Filtration


Replaceable cartridge filter
Backhoe Dimensions

Dig Depth (A)


2ft Flat Bottom SAE - 14'7" (4450 mm)
Max Dig Depth - 16'1" (4890 mm)
SAE - 14'8" (4460 mm)

Reach Ground (B)


Level to Swing Post - 18'9" (5726 mm)

Loading Reach (C)


6'7" (2000 mm)

Operating Height (D)


18'7" (5670 mm)

Loading Height (E)


Max Load Height - 12'9" (3882 mm)
SAE - 11'8" (3469 mm)

Max Straight Wall Load Height (F)


8'6" (2591 mm)

Bucket Rotation (G)


Power - 163º
Speed - 194º

Side Reach From Stabilizers


12'7" (3835 mm)

Stabilizer Spread


11'3" (3430 mm)

Max Leveling Angle


Backhoe Performance

Dipper Tearout


8670 lbs
3946 kg

Bucket Tearout - Speed


11596 lbs
5260 kg

Bucket Tearout - Power


12696 lbs
5759 kg

Lift Capacity (To Full Height)

2952 lbs
1339 kg

Lift Capacity (inc. Basket)

2646 lbs
1203 kg


There are no listed accessories.

Copyright © 2021 Smith-Hamilton, Inc
0.001 150419 18:39