Milwaukee's Band Saws are the choice of professionals. With
high torque and powerful motor this band saw will maintain a steady, optimum
blade speed. The excellent balance, high visibility and quick blade change
system make this band saw easy to work with. Using an all ball and roller
bearing construction, and worm gear and chain drive mechanism this tool is built
to last. A self-lubricating system is used for maximum wear resistance and long
life. No oiling is needed. Includes Band Saw and one 14 TPI Bi-Metal Blade.
Model |
Specifications |
6225 |
Cuts up to 3-1/2 in. x 4-1/2 in. rectangular
stock and 3-1/2 in. round stock
6/5 amp, AC only
Two-speeds: 200 and 250 sfpm
Uses standard 44-7/8 in. x 1/2 in. x .020 in. band saw blades |
6226 |
Cuts up to 3-1/2 in. x 4-1/2 in. rectangular
stock and 3-1/2 in. round stock
6/5 amp, AC only
Two-speeds: 200 and 250 sfpm
Uses standard 44-7/8 in. x 1/2 in. x .020 in. band saw blades |
6230 |
Cuts up to 4-3/4 in. x 4-3/4 in. rectangular
stock and 4-3/4 in. round stock
6 amp, AC only
Trigger speed control: 0-350 sfpm
Uses standard 44-7/8 in. x 1/2 in. x .020 in. band saw blades |
6232-6 |
Cuts up to 4-3/4 inch x 4-3/4 inch
rectangular stock and 4-3/4 inch round stock
6 amp, AC only
Trigger speed control: 0-350 sfpm
Uses standard 44-7/8 inch x 1/2 inch x .020 inch band saw blades |
6236 |
Cuts up to 4-3/4 in. x 4-3/4 in. rectangular
stock and 4-3/4 in. round stock
6 amp, AC/DC
Two speeds: 250 and 350 sfpm
Uses standard 44-7/8 in. x 1/2 in. x .020 in. band saw blades |
6238 |
Cuts up to 4-3/4 in. x 4-3/4 in. rectangular
stock and 4-3/4 in. round stock
6 amp, AC/DC
Two speeds: 250 and 350 sfpm
Uses standard 44-7/8 in. x 1/2 in. x .020 in. band saw blades |
Model |
Specifications |
725 |
4.5 Amp (low) & 6.5 Amp
(high), AC/DC
44-7/8" blade
Cuts 3-3/8" x 4-1/8" rectangular
Two-speed switch 195 SFPM (low) & 245 SFPM (high)
100% ball and needle bearings
Worm gear & chain drive
Standard Equipment: 18T Bi-Metal Blade #45277, Blade Wax #44914, Gear
Lubricant #48105, and operating manual |
7724 |
6 Amps, AC only
44-7/8" blade
Cuts 4-1/2" x 4-3/4" rectangular
Variable speed dial 100-245 SFPM
100% ball and needle bearings
Spur gear & chain drive
Standard Equipment: 18T Bi-Metal Blade #45277, Blade Wax #44914, and
operating manual |
|
There are no further details.
There are no further specifications.
There is no further information.
There are no listed accessories.