chat now with southern tool
Technical Sales 1–800–458–3687

American Rotary 50 HP Phase Converter

ar50, ad50, adx50, gtx-15, 50 HP Rotary Phase Converter

Laser cut knockouts - no drilling required - 20HP 3-Phase Rotary ConverterRemoveable sides for easy wiring - 20HP 3-Phase Rotary Converter

 

Now that you have determined that the 50 HP rotary phase converter is the correct size for your application, American Rotary has some exclusive choices for you - ones that you cannot find anywhere else. One of those choices is the controller. To help you choose, here are your options: Mechanical, Digital and ADX Controls:

Mechanical Controls (AR Series): Delivers the voltage balance required for CNC and other voltage-sensitive equipment, and is also advantageous to non-CNC three phase loads. Perfect for standard and heavy duty equipment including CNC, VFD and other voltage sensitive applications

Digital Controls (AD Series): The best performance and protection to the phase converter start circuit and idler/generator, and they allow for increased torque that can be required for extreme starting loads while maintaining precise voltage balancing. If the AR series is like a carbureted engine, the AD series is fuel injected more powerful, reliable, and precise. Runs w/fully programmable MicroSmart controller

ADX Series: In addition to the AD, the ADX series adds nitrous 250 percent more starting power, for compressors, pumps, flywheel loads, etc. w/fully programmable MicroSmart controller. ADX models have current control to provide consistent torque while starting high inertia, extremely hard starting loads, yet are precise enough for CNC applications.

50 HP Rotary Phase Converter (INCLUDES STARTER)

Features

  • Most Economical units
  • Built-in Starters
  • +/- 5 Percent Voltage

Specifications

  • Cost to Operate: $ .15/hr.
  • Largest HP Motor to Start: 40HP
  • Max Total HP to Run (non-CNC): 75HP, 182amps
  • Max Total HP to Run (CNC): 25HP, 68amps

Idler Generator

  • Achieve optimum voltage and current balance throughout the full load of the converter
  • Awarded a Soft Start rating by drastically reducing inrush current upon startup.
  • Run cool, quietly, and efficiently at synchronous speed indefinitely.
  • Manufactured in the USA by Baldor Electric
  • Designed and engineered for phase conversion

Control Panel

  • Achieve optimum voltage and current balance throughout the full load of the converter
  • Awarded a Soft Start rating by drastically reducing inrush current upon startup.
  • Run cool, quietly, and efficiently at synchronous speed indefinitely.
  • Manufactured in the USA by Baldor Electric
  • Push-Button ON/OFF Switch w/ PowerGuard Protection
  • Heavy Duty Performance, 100 percent Power
  • Powder-Coated Steel Enclosure
  • Integrated protection in case of power interruption
  • Removable sides for easy access to wiring
  • Stress-free component mounts prevent leakage
  • Oil-Filled capacitors with raised voltage ratings optimized for the demands of phase conversion.
  • Copper windings with ISR magnet wire
  • Best Warranty in the Industry

Aditional Information

This 50HP Rotary Phase Converter changes input single phase power into three phase power, allowing shop equipment to operate at maximum efficiency.  The proper size of a phase converter is determined by the largest load motor to start.  Please call toll free 1-800-458-3687 for sizing assistance and/or our recommendation for your specific application.  This 50HP unit will start and run:

  • Easy Loads up to 40HP:  Drills, Mills, Chop Saws, Wheel Balancers, etc.
  • Medium Loads up to 35HP:  Routers, Wide Belt Sanders, Radial Arm Saws, Air Compressors, Balers, Drills, etc.
  • Hard Loads up to 25HP:  Presses, Punches, Balers, Compressors, Shapers, Shears, Sheet Metal Breaks, Lathes, Sanders, Mixers, etc.
  • CNC and Resistive Loads up to 25HP (68)amps:  Milling Machines, Lathes, etc.

Now that you have determined that the 50 HP rotary phase converter is the correct size for your application, American Rotary has some exclusive choices for you - ones that you cannot find anywhere else. One of those choices is the controller. To help you choose, here are your options: Mechanical, Digital and ADX Controls:

Mechanical Controls (AR Series): Delivers the voltage balance required for CNC and other voltage-sensitive equipment, and is also advantageous to non-CNC three phase loads. Perfect for standard and heavy duty equipment including CNC, VFD and other voltage sensitive applications

Digital Controls (AD Series): The best performance and protection to the phase converter start circuit and idler/generator, and they allow for increased torque that can be required for extreme starting loads while maintaining precise voltage balancing. If the AR series is like a carbureted engine, the AD series is fuel injected…more powerful, reliable, and precise. Runs w/fully programmable MicroSmart controller

ADX Series: In addition to the AD, the ADX series adds nitrous 50 percent more starting power, for compressors, pumps, flywheel loads, etc. w/fully programmable MicroSmart controller. ADX models have current control to provide consistent torque while starting high inertia, extremely hard starting loads, yet are precise enough for CNC applications.

50 HP Rotary Phase Converter CNC-PRO (INCLUDES STARTER and DIGITAL BOARD (CNC))

Features

  • All features of Classic Series PLUS
  •  +/- 5 percent Voltage Balance
  • Wider range of field modifications possible
  • Digital Board aids in the protection of the start circuit
  • Best Precision on starting the unit

Specifications

  • Cost to Operate: $ .15/hr.
  • Largest HP Motor to Start: 40HP
  • Max Total HP to Run (non-CNC): 75HP, 182amps
  • Max Total HP to Run (CNC): 25HP, 68amps

Idler Generator

  • Achieve optimum voltage and current balance throughout the full load of the converter
  • Awarded a Soft Start rating by drastically reducing inrush current upon startup.
  • Run cool, quietly, and efficiently at synchronous speed indefinitely.
  • Manufactured in the USA by Baldor Electric
  • Designed and engineered for phase conversion

Control Panel

  • Achieve optimum voltage and current balance throughout the full load of the converter
  • Awarded a Soft Start rating by drastically reducing inrush current upon startup.
  • Run cool, quietly, and efficiently at synchronous speed indefinitely.
  • Manufactured in the USA by Baldor Electric
  • Push-Button ON/OFF Switch w/ PowerGuard Protection
  • Heavy Duty Performance, 100% Power
  • Powder-Coated Steel Enclosure
  • Integrated protection in case of power interruption
  • Removable sides for easy access to wiring
  • Stress-free component mounts prevent leakage
  • Oil-Filled capacitors with raised voltage ratings optimized for the demands of phase conversion.
  • Copper windings with ISR magnet wire
  • Best Warranty in the Industry

Aditional Information

This 50HP Rotary Phase Converter changes input single phase power into three phase power, allowing shop equipment to operate at maximum efficiency.  The proper size of a phase converter is determined by the largest load motor to start.  Please call toll free 1-800-458-3687 for sizing assistance and/or our recommendation for your specific application.  This 50HP unit will start and run:

  • Easy Loads up to 40HP: 
    Drills, Mills, Chop Saws, Wheel Balancers, etc.

  • Medium Loads up to 35HP: 
    Routers, Wide Belt Sanders, Radial Arm Saws, Air Compressors, Balers, Drills, etc.

  • Hard Loads up to 25HP: 
    Presses, Punches, Balers, Compressors, Shapers, Shears, Sheet Metal Breaks, Lathes, Sanders, Mixers, etc.

  • CNC and Resistive Loads up to 25HP (68)amps: 
    Milling Machines, Lathes, etc.

Now that you have determined that the 50 HP rotary phase converter is the correct size for your application, American Rotary has some exclusive choices for you - ones that you cannot find anywhere else. One of those choices is the controller. To help you choose, here are your options: Mechanical, Digital and ADX Controls:

Mechanical Controls (AR Series): Delivers the voltage balance required for CNC and other voltage-sensitive equipment, and is also advantageous to non-CNC three phase loads. Perfect for standard and heavy duty equipment including CNC, VFD and other voltage sensitive applications

Digital Controls (AD Series): The best performance and protection to the phase converter start circuit and idler/generator, and they allow for increased torque that can be required for extreme starting loads while maintaining precise voltage balancing. If the AR series is like a carbureted engine, the AD series is fuel injected…more powerful, reliable, and precise. Runs w/fully programmable MicroSmart controller

ADX Series: In addition to the AD, the ADX series adds nitrous… 250 percent more starting power, for compressors, pumps, flywheel loads, etc. w/fully programmable MicroSmart controller. ADX models have current control to provide consistent torque while starting high inertia, extremely hard starting loads, yet are precise enough for CNC applications.

50 HP Rotary Phase Converter Gentec Full Digital INCLUDES STARTER and DIGITAL BOARD (CNC)

Features

  • Best Features of American Rotary-CNC Pro Series PLUS
  • Built in Heavy Load Voltage Stabilizer
  • Two Button Start Circuit
  • Mounting Feet Included
  • Automatic Controls
  • All non-electrolytic capacitors provide the most stable environment
  • Single PhaseIndicator Light

Specifications

  • Cost to Operate: $.15/hr.
  • Largest HP Motor to Start: 40HP
  • Max Total HP to Run (non-CNC): 75HP, 182amps
  • Max Total HP to Run (CNC): 25HP, 68amps

Idler Generator

  • Achieve optimum voltage and current balance throughout the full load of the converter
  • Awarded a Soft Start rating by drastically reducing inrush current upon startup.
  • Run cool, quietly, and efficiently at synchronous speed indefinitely.
  • Manufactured in the USA by Baldor Electric
  • Designed and engineered for phase conversion

Control Panel

  • Achieve optimum voltage and current balance throughout the full load of the converter
  • Awarded a Soft Start rating by drastically reducing inrush current upon startup.
  • Run cool, quietly, and efficiently at synchronous speed indefinitely.
  • Manufactured in the USA by Baldor Electric
  • Push-Button ON/OFF Switch w/ PowerGuard Protection
  • Heavy Duty Performance, 100% Power
  • Powder-Coated Steel Enclosure
  • Integrated protection in case of power interruption
  • Removable sides for easy access to wiring
  • Stress-free component mounts prevent leakage
  • Oil-Filled capacitors with raised voltage ratings optimized for the demands of phase conversion.
  • Copper windings with ISR magnet wire
  • Best Warranty in the Industry

Aditional Information

This 50HP Rotary Phase Converter changes input single phase power into three phase power, allowing shop equipment to operate at maximum efficiency.  The proper size of a phase converter is determined by the largest load motor to start.  Please call toll free 1-800-458-3687 for sizing assistance and/or our recommendation for your specific application.  This 50HP unit will start and run:

  • Easy Loads up to 40HP: 
    Drills, Mills, Chop Saws, Wheel Balancers, etc.

  • Medium Loads up to 35HP: 
    Routers, Wide Belt Sanders, Radial Arm Saws, Air Compressors, Balers, Drills, etc.

  • Hard Loads up to 25HP: 
    Presses, Punches, Balers, Compressors, Shapers, Shears, Sheet Metal Breaks, Lathes, Sanders, Mixers, etc.

  • CNC & Resistive Loads up to 25HP (68)amps: 
    Milling Machines, Lathes, etc.

Specifications
Part Number AR, AD, ADX 50
kW of Generator (based on FLA) 37.3
Idler / Generator FLA 130
Frequency (Hz) 60
Generator Type GENTEC / Variable Impendence
Magnetic Starter Included (remote start redy)
Panel Enclosure NEMA 1
Tempoerature rating 40 C Ambient
Wave Form Pure Sinusoidal Analog
Phase Angle 120 Degrees
Efficency 97 percent
Three Phase Output Specifications (continuous)
Output voltage equals input voltage
Voltage tolerance meets IEEE Std. 241-1990 utility
3 phase output configuration 3 Wire delta
Service factor 1.15
Output Frequency (Hz) Input Frequency
Output Current (use for resistive and rectified loads, i.e. Welder, CNC, VFD, Power supply) amps at 240V
3 Phase output current remomended for CNC, welder, VFD, voltage sensitive 65
Max current for IEEE Std. utility line 80
Starting Motor Loads (HP / kW)
Max. HP / kW start (Moderate Load) Type 1 4./30
Max. HP / kW start (Hard Load) Type 2 25/18.7
Max. HP / kW start (High Inertia) Type 3 20/14.9
Max. HP / kW start (High Inertia) Type 3 w / ADX 25/18.7
Max. HP / kW start Total Motor Group Load 75/56
Max. HP / kW start (CNC or VFD) Type 4 25/18.7
Single Phase Output Specifications (continuous)
Voltage Input 208-250
Input Frequencey (Hz) 60
(HP load /  1 ph amps) 15/59
(HP load /  1 ph amps) 25/112
(HP load /  1 ph amps) 37.5/184
Power Consumption (kW) 0.75
Cost to Run (at 0.10 / kW / HP) $ / Hr 0.75
Minimum Breaker Size 2 x load current
Cpmductors should be sized according to minimum breaker size and NEX requirements
50 HP Classic, CNC-Pro and Gentic Full Digital Rotary Phase Converters
AD50 50  HP CNC-Pro -  Rotary Phase Converter - Made in the USA - With Baldor Motors
ADX50 50 HP -  Rotary Phase Converter -  Pro-Digital High inertia Starting  *Floor Mount and Isolation Mounts (Feet) Options are available for an additional Charge
GTX-15 50  HP Gentec Full Digital CNC -  Rotary Phase Converter - Made in the USA - With Baldor Motors

 

 

Accessories
TimerKit(InstalledorFieldInstalled)
SDDO Timer Kit (Installed or Field Installed)
SafetyDisconnectSwitches
DSSQD341 DU321-DS SQD 341 (30amp)    - Safety Disconnect Switches
DSSQD343 DU322- DS SQD 343 (60amp)    - Safety Disconnect Switches
DSSQD345 DU323- DS SQD 345 (100amp)    - Safety Disconnect Switches
Wired Remote Starter
1HB 1 Hole Box with Switch  - Wired Remote Starter
2HB 2 Hole Box with Switch  - Wired Remote Starter
SW Switch Wire  - Wired Remote Starter
Wireless Remote Starter
WRS Wireless Remote Starter
Rubber Isolation Mounting Feet
RSMFS Small Rubber Feet (3-10HP)  - Rubber Isolation Mounting Feet
RSMFL Large Rubber Feet (15-75HP)  - Rubber Isolation Mounting Feet
RSMFSB Small Bolt-down Rubber Feet (3-15HP)  - Rubber Isolation Mounting Feet
RSMFLB Large Bolt-down Rubber Feet (20-75HP  - Rubber Isolation Mounting Feet

 

AD50
50 HP - ROTARY PHASE CONVERTER - DIGITAL CNC-PRO *FLOOR MOUNT AND ISOLATION MOUNTS (FEET) OPTIONS ARE NOW INCLUDED AT NO CHARGE
NEW! - LIFETIME WARRANTY ON AD AND ADX PHASE CONVERTER PANELS
Mfg. item #: AD50
AMEAD50
lease to own for as little as:$58 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,898.00

56
ADX50
50 HP - ROTARY PHASE CONVERTER - PRO-DIGITAL HIGH INERTIA STARTING *FLOOR MOUNT AND ISOLATION MOUNTS (FEET) OPTIONS ARE NOW INCLUDED AT NO CHARGE
NEW! - LIFETIME WARRANTY ON AD AND ADX PHASE CONVERTER PANELS
Mfg. item #: ADX50
AMEADX50
lease to own for as little as:$63 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,165.00

56
GTX-15
50 HP - ROTARY PHASE CONVERTER - GENTEC DIGITAL INDUSTRIAL / OEM *ISOLATION MOUNTS (FEET) INCLUDED
Mfg. item #: GTX-15
AMEGTX-15
lease to own for as little as:$86 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,304.00

56
SDDO
TIMER KIT (INSTALLED OR FIELD INSTALLED)
Mfg. item #: SDDO
AMESDDO
FREE shipping when ordered with a machine from this manufacturer.20
$265.00

1287
DSSQD341
DU321-DS SQD 341 (30AMP) - SAFETY DISCONNECT SWITCHES
Mfg. item #: DSSQD341
AMEDSSQD341
FREE shipping when ordered with a machine from this manufacturer.20
$54.00

1287
DSSQD343
DU322- DS SQD 343 (60AMP) - SAFETY DISCONNECT SWITCHES
Mfg. item #: DSSQD343
AMEDSSQD343
FREE shipping when ordered with a machine from this manufacturer.20
$72.00

1287
DSSQD345
DU323- DS SQD 345 (100AMP) - SAFETY DISCONNECT SWITCHES
Mfg. item #: DSSQD345
AMEDSSQD345
FREE shipping when ordered with a machine from this manufacturer.20
$166.00

1287
1HB
1 HOLE BOX WITH SWITCH - WIRED REMOTE STARTER
Mfg. item #: 1HB
AME1HB
FREE shipping when ordered with a machine from this manufacturer.20
$53.00

1287
2HB
2 HOLE BOX WITH SWITCH - WIRED REMOTE STARTER
Mfg. item #: 2HB
AME2HB
FREE shipping when ordered with a machine from this manufacturer.20
$67.00

1287
SW
SWITCH WIRE - WIRED REMOTE STARTER
Mfg. item #: SW
AMESW
FREE shipping when ordered with a machine from this manufacturer.20
$1.50

1287
WRS
WIRELESS REMOTE STARTER
Mfg. item #: WRS
AMEWRS
FREE shipping when ordered with a machine from this manufacturer.20
$350.00

1287
RSMFS
SMALL RUBBER FEET (3-10HP) - RUBBER ISOLATION MOUNTING FEET
Mfg. item #: RSMFS
AMERSMFS
FREE shipping when ordered with a machine from this manufacturer.20
$21.95

1287
RSMFL
LARGE RUBBER FEET (15-75HP) - RUBBER ISOLATION MOUNTING FEET
Mfg. item #: RSMFL
AMERSMFL
FREE shipping when ordered with a machine from this manufacturer.20
$24.95

1287
RSMFSB
SMALL BOLT-DOWN RUBBER FEET (3-15HP) - RUBBER ISOLATION MOUNTING FEET
Mfg. item #: RSMFSB
AMERSMFSB
FREE shipping when ordered with a machine from this manufacturer.20
$74.95

1287
RSMFLB
LARGE BOLT-DOWN RUBBER FEET (20-75HP - RUBBER ISOLATION MOUNTING FEET
Mfg. item #: RSMFLB
AMERSMFLB
FREE shipping when ordered with a machine from this manufacturer.20
$79.95

1287
Copyright © 2017 Smith-Hamilton, Inc
0.011 170915 07:29