chat now with southern tool
Technical Sales 1–800–458–3687

American Rotary 60 HP Phase Converter

FREE Freight on all American Rotary Phase Converters

ar60, ad60, adx60, gtx-16, 60 HP Rotary Phase Converter

Quick Sizing Guide
Phase Converter Model 3 5 7.5 10 15 20 25 30 40 50 60 75
Single motor start max. (HP) 1.5 2.5 3.5 5 7.5 10 12.5 15 20 25 30 40
Total Combined Loads Call for Combined Load Sizing
CNC/VFD (HP) 1.5 2.5 3.5 5 7.5 10 12.5 15 20 25 30 40
Resistive/Oven (amps) 4.8 7.5 11 14 21 27 34 40 52 65 75 100
Rectified/Welder (amps) 4.8 7.5 11 14 21 27 34 40 52 65 75 100

 

Now that you have determined that the 60 HP rotary phase converter is the correct size for your application, American Rotary has some exclusive choices for you - ones that you cannot find anywhere else. One of those choices is the controller. To help you choose, here are your options: Mechanical, Digital and ADX Controls:

Digital Controls (AD Series): The best performance and protection to the phase converter start circuit and idler/generator, and they allow for increased torque that can be required for extreme starting loads while maintaining precise voltage balancing. If the AR series is like a carbureted engine, the AD series is fuel injected more powerful, reliable, and precise. Runs w/fully programmable MicroSmart controller

ADX Series: In addition to the AD, the ADX series adds nitrous 250 percent more starting power, for compressors, pumps, flywheel loads, etc. w/fully programmable MicroSmart controller. ADX models have current control to provide consistent torque while starting high inertia, extremely hard starting loads, yet are precise enough for CNC applications.

60 HP Rotary Phase Converter (INCLUDES STARTER)

Features

  • Most Economical units
  • Built-in Starters
  • +/- 5 Percent Voltage

Specifications

  • Cost to Operate: $.18/hr.
  • Largest HP Motor to Start: 50HP
  • Max Total HP to Run (non-CNC): 90HP, 225amps
  • Max Total HP to Run (CNC): 30HP, 80amps

Idler Generator

  • Achieve optimum voltage and current balance throughout the full load of the converter
  • Awarded a Soft Start rating by drastically reducing inrush current upon startup.
  • Run cool, quietly, and efficiently at synchronous speed indefinitely.
  • Manufactured in the USA by Baldor Electric
  • Designed and engineered for phase conversion

Control Panel

  • Achieve optimum voltage and current balance throughout the full load of the converter
  • Awarded a Soft Start rating by drastically reducing inrush current upon startup.
  • Run cool, quietly, and efficiently at synchronous speed indefinitely.
  • Manufactured in the USA by Baldor Electric
  • Push-Button ON/OFF Switch w/ PowerGuard Protection
  • Heavy Duty Performance, 100 percent Power
  • Powder-Coated Steel Enclosure
  • Integrated protection in case of power interruption
  • Removable sides for easy access to wiring
  • Stress-free component mounts prevent leakage
  • Oil-Filled capacitors with raised voltage ratings optimized for the demands of phase conversion.
  • Copper windings with ISR magnet wire
  • Best Warranty in the Industry

Aditional Information

This 60HP Rotary Phase Converter changes input single phase power into three phase power, allowing shop equipment to operate at maximum efficiency.  The proper size of a phase converter is determined by the largest load motor to start.  Please call toll free 1-800-458-3687 for sizing assistance and/or our recommendation for your specific application.  This 60HP unit will start and run:

  • Easy Loads up to 50HP: 
    Drills, Mills, Chop Saws, Wheel Balancers, etc.

  • Medium Loads up to 40HP: 
    Routers, Wide Belt Sanders, Radial Arm Saws, Air Compressors, Balers, Drills, etc.

  • Hard Loads up to 30HP: 
    Presses, Punches, Balers, Compressors, Shapers, Shears, Sheet Metal Breaks, Lathes, Sanders, Mixers, etc.

  • CNC and Resistive Loads up to 30HP (80)amps: 
    Milling Machines, Lathes, etc.

Now that you have determined that the 60 HP rotary phase converter is the correct size for your application, American Rotary has some exclusive choices for you - ones that you cannot find anywhere else. One of those choices is the controller. To help you choose, here are your options: Mechanical, Digital and ADX Controls:

Digital Controls (AD Series): The best performance and protection to the phase converter start circuit and idler/generator, and they allow for increased torque that can be required for extreme starting loads while maintaining precise voltage balancing. If the AR series is like a carbureted engine, the AD series is fuel injected…more powerful, reliable, and precise. Runs w/fully programmable MicroSmart controller

ADX Series: In addition to the AD, the ADX series adds nitrous 250 percent more starting power, for compressors, pumps, flywheel loads, etc. w/fully programmable MicroSmart controller. ADX models have current control to provide consistent torque while starting high inertia, extremely hard starting loads, yet are precise enough for CNC applications.

60 HP Rotary Phase Converter CNC-PRO (INCLUDES STARTER & DIGITAL BOARD (CNC))

Features

  • All features of Classic Series PLUS
  •  +/- 5 percent  Voltage Balance
  • Wider range of field modifications possible
  • Digital Board aids in the protection of the start circuit
  • Best Precision on starting the unit

Specifications

  • Cost to Operate: $ .18/hr.
  • Largest HP Motor to Start: 50HP
  • Max Total HP to Run (non-CNC): 90HP, 225amps
  • Max Total HP to Run (CNC): 30HP, 80amps

Idler Generator

  • Achieve optimum voltage and current balance throughout the full load of the converter
  • Awarded a Soft Start rating by drastically reducing inrush current upon startup.
  • Run cool, quietly, and efficiently at synchronous speed indefinitely.
  • Manufactured in the USA by Baldor Electric
  • Designed and engineered for phase conversion

Control Panel

  • Achieve optimum voltage and current balance throughout the full load of the converter
  • Awarded a Soft Start rating by drastically reducing inrush current upon startup.
  • Run cool, quietly, and efficiently at synchronous speed indefinitely.
  • Manufactured in the USA by Baldor Electric
  • Push-Button ON/OFF Switch w/ PowerGuard Protection
  • Heavy Duty Performance, 100 percent Power
  • Powder-Coated Steel Enclosure
  • Integrated protection in case of power interruption
  • Removable sides for easy access to wiring
  • Stress-free component mounts prevent leakage
  • Oil-Filled capacitors with raised voltage ratings optimized for the demands of phase conversion.
  • Copper windings with ISR magnet wire
  • Best Warranty in the Industry

Aditional Information

This 60HP Rotary Phase Converter changes input single phase power into three phase power, allowing shop equipment to operate at maximum efficiency.  The proper size of a phase converter is determined by the largest load motor to start.  Please call toll free 1-800-458-3687for sizing assistance and/or our recommendation for your specific application.  This 60HP unit will start and run:

  • Easy Loads up to 50HP: 
    Drills, Mills, Chop Saws, Wheel Balancers, etc.

  • Medium Loads up to 40HP: 
    Routers, Wide Belt Sanders, Radial Arm Saws, Air Compressors, Balers, Drills, etc.

  • Hard Loads up to 30HP: 
    Presses, Punches, Balers, Compressors, Shapers, Shears, Sheet Metal Breaks, Lathes, Sanders, Mixers, etc.

  • CNC & Resistive Loads up to 30HP (80)amps: 
    Milling Machines, Lathes, etc.

Now that you have determined that the 60 HP rotary phase converter is the correct size for your application, American Rotary has some exclusive choices for you - ones that you cannot find anywhere else. One of those choices is the controller. To help you choose, here are your options: Mechanical, Digital and ADX Controls:

Digital Controls (AD Series): The best performance and protection to the phase converter start circuit and idler/generator, and they allow for increased torque that can be required for extreme starting loads while maintaining precise voltage balancing. If the AR series is like a carbureted engine, the AD series is fuel injected…more powerful, reliable, and precise. Runs w/fully programmable MicroSmart controller

ADX Series: In addition to the AD, the ADX series adds nitrous 250 percent more starting power, for compressors, pumps, flywheel loads, etc. w/fully programmable MicroSmart controller. ADX models have current control to provide consistent torque while starting high inertia, extremely hard starting loads, yet are precise enough for CNC applications.

60 HP Rotary Phase Converter Gentec Full Digital INCLUDES STARTER and DIGITAL BOARD (CNC)

Features

  • Best Features of American Rotary-CNC Pro Series PLUS
  • Built in Heavy Load Voltage Stabilizer
  • Two Button Start Circuit
  • Mounting Feet Included
  • Automatic Controls
  • All non-electrolytic capacitors provide the most stable environment
  • Single PhaseIndicator Light

Specifications

  • Cost to Operate: $ .18/hr.
  • Largest HP Motor to Start: 50HP
  • Max Total HP to Run (non-CNC): 90HP, 225amps
  • Max Total HP to Run (CNC): 30HP, 80amps

Idler Generator

  • Achieve optimum voltage and current balance throughout the full load of the converter
  • Awarded a Soft Start rating by drastically reducing inrush current upon startup.
  • Run cool, quietly, and efficiently at synchronous speed indefinitely.
  • Manufactured in the USA by Baldor Electric
  • Designed and engineered for phase conversion

Control Panel

  • Achieve optimum voltage and current balance throughout the full load of the converter
  • Awarded a Soft Start rating by drastically reducing inrush current upon startup.
  • Run cool, quietly, and efficiently at synchronous speed indefinitely.
  • Manufactured in the USA by Baldor Electric
  • Push-Button ON/OFF Switch w/ PowerGuard Protection
  • Heavy Duty Performance, 100 percent Power
  • Powder-Coated Steel Enclosure
  • Integrated protection in case of power interruption
  • Removable sides for easy access to wiring
  • Stress-free component mounts prevent leakage
  • Oil-Filled capacitors with raised voltage ratings optimized for the demands of phase conversion.
  • Copper windings with ISR magnet wire
  • Best Warranty in the Industry

Aditional Information

This 60HP Rotary Phase Converter changes input single phase power into three phase power, allowing shop equipment to operate at maximum efficiency.  The proper size of a phase converter is determined by the largest load motor to start.  Please call toll free 1-800-458-3687for sizing assistance and/or our recommendation for your specific application.  This 60HP unit will start and run:

  • Easy Loads up to 50HP: 
    Drills, Mills, Chop Saws, Wheel Balancers, etc.

  • Medium Loads up to 40HP: 
    Routers, Wide Belt Sanders, Radial Arm Saws, Air Compressors, Balers, Drills, etc.

  • Hard Loads up to 30HP: 
    Presses, Punches, Balers, Compressors, Shapers, Shears, Sheet Metal Breaks, Lathes, Sanders, Mixers, etc.

  • CNC and Resistive Loads up to 30HP (80)amps: 
    Milling Machines, Lathes, etc.

Specifications
Part Number AR, AD, ADX 60
kW of Generator (based on FLA) 44.8
Idler / Generator FLA 150
Frequency (Hz) 60
Generator Type GENTEC / Variable Impendence
Magnetic Starter Included (remote start redy)
Panel Enclosure NEMA 1
Tempoerature rating 40 C Ambient
Wave Form Pure Sinusoidal Analog
Phase Angle 120 Degrees
Efficency 97 percent
Three Phase Output Specifications (continuous)
Output voltage equals input voltage
Voltage tolerance meets IEEE Std. 241-1990 utility
3 phase output configuration 3 Wire delta
Service factor 1.15
Output Frequency (Hz) Input Frequency
Output Current (use for resistive and rectified loads, i.e. Welder, CNC, VFD, Power supply) amps at 240V
3 Phase output current remomended for CNC, welder, VFD, voltage sensitive 75
Max current for IEEE Std. utility line 90
Starting Motor Loads (HP / kW)
Max. HP / kW start (Moderate Load) Type 1 50/37.3
Max. HP / kW start (Hard Load) Type 2 30/22.4
Max. HP / kW start (High Inertia) Type 3 25/18.7
Max. HP / kW start (High Inertia) Type 3 w / ADX 30/22.4
Max. HP / kW start Total Motor Group Load 9067
Max. HP / kW start (CNC or VFD) Type 4 30/22.4
Single Phase Output Specifications (continuous)
Voltage Input 208-250
Input Frequencey (Hz) 60
(HP load /  1 ph amps) 20/78
(HP load /  1 ph amps) 30/134
(HP load /  1 ph amps) 45/221
Power Consumption (kW) 0.90
Cost to Run (at 0.10 / kW / HP) $ / Hr 0.90
Minimum Breaker Size 2 x load current
Cpmductors should be sized according to minimum breaker size and NEX requirements

 

Models and Accessories
AD60  60HP Digital Smart Rotary Phase Converter
AD60-4  60HP Digital Smart Rotary Phase Converter
ADX60  60HP Extreme Duty SMART Rotary Phase Converter
ADX60-4  60HP Extreme Duty SMART Rotary Phase Converter

 

 
AD60
AD60 - 60HP DIGITAL SMART ROTARY PHASE CONVERTER 208 - 250 VOLT
FREE FREIGHT, UL APPROVED, RUBBER MOUNTS & GREASELIFETIME WARRANTY
Mfg. item #: AD60
AMEAD60
lease to own for as little as:$82 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$4,114.00

30
AD60-4
AD60-4 - 60HP DIGITAL SMART ROTARY PHASE CONVERTER 440 - 480 VOLT
FREE FREIGHT, UL APPROVED, RUBBER MOUNTS & GREASELIFETIME WARRANTY
Mfg. item #: AD60-4
AMEAD60-4
lease to own for as little as:$86 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
NEW ITEM
$4,314.00

30
ADX60
ADX60 - 60HP EXTREME DUTY SMART ROTARY PHASE CONVERTER 208 - 250 VOLT
FREE FREIGHT, UL APPROVED, RUBBER MOUNTS & GREASELIFETIME WARRANTY
Mfg. item #: ADX60
AMEADX60
lease to own for as little as:$92 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$4,621.00

30
ADX60-4
ADX60-4 - 60HP EXTREME DUTY SMART ROTARY PHASE CONVERTER 440 - 480 VOLT
FREE FREIGHT, UL APPROVED, RUBBER MOUNTS & GREASELIFETIME WARRANTY
Mfg. item #: ADX60-4
AMEADX60-4
lease to own for as little as:$96 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
NEW ITEM
$4,821.00

30
Copyright © 2018 Smith-Hamilton, Inc
0.005 180515 12:44