Technical Sales 1–800–458–3687

Baileigh Woodworking Edge Sanders

Edge Sander ES-6100  Vertical Edge Sander ES-8120  Oscillating Edge Sander ES-6108  Oscillating Edge Sander ES-9138

Edge Sander
ES-6100

 Vertical Edge Sander
ES-8120
 Oscillating Edge Sander
ES-6108

 Oscillating Edge Sander
ES-9138

 

Edge sander

Edge Sander ES-6100 

1004158

If you are looking for an affordable high quality edge sander, then look no further than the ES-6100 from Baileigh Industrial. This economical oscillating sander has a belt that is 6 inch wide and 100 inch long that turns at 3773 feet per minute via its 220 volt single phase motor. Using 220 volt single phase allows the ES-6100 to be used just about anywhere and make is perfect for schools or small shops.

The ES-6100 has an all cast iron table that is 33 inch by 12 inch and is designed to allow the operator to sand at 180, 90 and 45 degrees.  The ES-6100 also has a built in oscillation feature to ensure long belt life.   Another nice feature of the ES-6100 edge sander is the built in table rise system that can raise or lower the table with just a turn of the hand wheel.

The ES-6100 also has a sturdy stand that can double as a storage cabinet.  A 4 inch dust port is also standard.  For more information contact a  representative.

Specifications
Model ES-6100
Dust Collection Port 4 inch
Number of Outlets 1
Table Size (Length) 33 inch
Table Size (Width) 11.8 inch
Rpm 1150
Belt/Blade Size 99 x 6 inch
Table Tilt (degrees) 45
Power 220V Single Phase
Length 50 inch
Width 29 inch
Height 36 inch
Horse Power 3
Weight (lbs) 460

 

Edge sander

Vertical Edge Sander ES-8120 

1004163

The ES-8120 from Baileigh Industrial might just be the best value in vertical edge sanders.  This sander comes with all the bells and whistles that one could want and has a 8 x 120 inch belt.  Running on a 4 hp 220 volt three phase motor the ES-8120’s belt turns 3937 feet per minute more than fast enough to take care of any job.  Along with the speed of rotation the ES-8120 also oscillates 3/4 inch up and down to help extend belt life.

The large 41 x 8 inch table is adjustable from 90 to 45 degrees and has 8-1/2 inch of adjustable height.  The ES-8120 includes many attachments that help with those unique jobs, things like belt covers and adjustable platens.  Two integrated dust hoods with ducting are also included to help keep the shop clean. For more information on the ES-8120 vertical edge sander from contact a representative today.

Specifications
Model ES-8120
Dust Collection Port 4.75 inch and 3 inch
Number of Outlets 2
Table Size (Length) 41 inch
Table Size (Width) 8 inch
Rpm 3937
Belt/Blade Size 120 x 6 inch
Table Tilt (degrees) 45
Power 220V Three Phase
Length 70 inch
Width 36 inch
Height 54 inch
Horse Power 4
Weight (lbs) 726

 

Edge sander

Oscillating Edge Sander ES-6108 

1004162 

Made in Taiwan

The ES-6108 from Baileigh Industrial is the little brother of the ES-9138 oscillating edge sander.  Many of the same features were carried over making this one of the best values on the market.  A 220 volt single phase 2HP motor powers the belt and runs a large gearbox to provide the oscillating action.  At 24 oscillations per minute the ES-6108 allows you to use the entire belt face to lengthen belt life.  It features a large 6 inch wide belt that is 108 inch long and has a quick change system.

To extend belt life the ES-6108 has a sturdy platen is cast iron and is covered with graphite for production sanding.  Using graphite offers great support and cooler running temps to extend belt life.  The table on the ES-6108 is 36 inch x 12 inch, one of the largest in its class.  It also tilts negative 5 degree and to positive 45 degree.  Radii can be shaded on the end of the ES-6108 as well.  An integrated stand and dual 4 inch dust collection ports are also included.  For more information on the ES-6108 oscillating edge sander, contact a representative today.

Specifications
Model ES-6108
Dust Collection Port 4 inch
Number of Outlets 2
Table Size (Length) 36 inch
Table Size (Width) 11.75 inch
Rpm 2000
Belt/Blade Size 108 x 6 inch
Table Tilt (degrees) 45
Power 220V Single Phase
Length 51 inch
Width 30 inch
Height 36 inch
Horse Power 2
Weight (lbs) 350

 

Edge sander

Oscillating Edge Sander ES-9138 

1004164 

Made in Taiwan

The ES-9138 is one of the largest oscillating edge sanders that you can get.  It features a large 9 inch wide belt that is 138.5 inch long.  Because of its width and length the belt will last longer and run cooler than machines with smaller belts.  The ES-9138 has a large 11-3/4 x 48 inch table to accommodate even the largest of pieces.  It will also tilt negative 5 degree and out to positive 45 degree.

The 48 x 9-1/2 inch platen is cast iron and is covered with graphite for production sanding.  Using graphite offers great support and cooler running temps to extend belt life. The ES-9138 has 24 oscillations per minute allowing you to use the entire belt face also lengthening belt life.  A 220 volt single phase 3HP motor powers the belt and runs a large gearbox to provide the oscillating action.  An integrated stand and dual 4 inch dust collection ports are also included.  For more information on the ES-9138 oscillating edge sander, contact a representative today.

Specifications
Model ES-9138
Dust Collection Port 4 inch
Number of Outlets 2
Table Size (Length) 48 inch
Table Size (Width) 11.75 inch
Rpm 3000
Belt/Blade Size 138.5 x 9 inch
Column Tilt (degrees) 45
Power 220V Single Phase
Length 75 inch
Width 40 inch
Height 60 inch
Horse Power 3
Weight (lbs) 700

 

There are no listed accessories.

1004158
220V SINGLE PHASE EDGE SANDER, 6 X 99 BELT SIZE, CAN SAND VERTICAL, HORIZONTAL, OR AT 45 DEGREES ** WEIGHT = 480 LBS / MADE IN CHINA - SHIPS LTL BOX TRUCK (18 WHEELER) RESIDENTAL, LIFTGATE DELIVERIES AVAILABLE
CALL 800-458-3687 X1 FOR THE BEST BROTHER-IN-LAW DELIVERED PRICE ON THIS BAILEIGH ITEM
Mfg. item #: 1004158
BAIES-6100
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,812.01

3
1004163
220V THREE PHASE EDGE SANDER, 6 X 120 BELT SIZE, CAN SAND VERTICAL, HORIZONTAL, OR AT 45 DEGREES ** WEIGHT = 940 LBS / MADE IN CHINA - SHIPS LTL BOX TRUCK (18 WHEELER) RESIDENTAL, LIFTGATE DELIVERIES AVAILABLE
CALL 800-458-3687 X1 FOR THE BEST BROTHER-IN-LAW DELIVERED PRICE ON THIS BAILEIGH ITEM
Mfg. item #: 1004163
BAIES-8120
lease to own for as little as:$87 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,783.87

3
1004162
220V SINGLE PHASE 2HP OSCILLATING EDGE SANDER, 6 X 108 BELT SIZE ** WEIGHT = 610 LBS / MADE IN TAIWAN - SHIPS LTL BOX TRUCK (18 WHEELER) RESIDENTAL, LIFTGATE DELIVERIES AVAILABLE
CALL 800-458-3687 X1 FOR THE BEST BROTHER-IN-LAW DELIVERED PRICE ON THIS BAILEIGH ITEM
Mfg. item #: 1004162
BAIES-6108
lease to own for as little as:$99 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$5,418.87

3
1004164
220V SINGLE PHASE 3HP OSCILLATING EDGE SANDER, 9 X 138.5 BELT SIZE, ** WEIGHT = 830 LBS / MADE IN TAIWAN - SHIPS LTL BOX TRUCK (18 WHEELER) RESIDENTAL, LIFTGATE DELIVERIES AVAILABLE
CALL 800-458-3687 X1 FOR THE BEST BROTHER-IN-LAW DELIVERED PRICE ON THIS BAILEIGH ITEM
Mfg. item #: 1004164
BAIES-9138
lease to own for as little as:$106 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$5,755.90

3
Copyright © 2021 Smith-Hamilton, Inc
0.003 190904 13:31