STANDARD EQUIPMENT
- Grinding wheel
- Grinding wheel flange
- Wheel balance arbor
- Diamond wheel dresser
- Working light system
- Tool box
- Hoisting set
- Leveling pads
- Coolant
- electrical magnet chuck with demagnetize system
- AHD: X, Y Axis. HDY. Auto feed up/down servo auto
feed
|
 | GENERAL FEATURES
- Enlarged, double wall, strongly ribbed column,
especially suitable for heavy duty grinding
- Construction of table, saddle and base is caste with
high grade casting iron, strongly ribbed
- Enlarged spindle set is supported by 4 pieces of
preloaded precision angular contact ball bearings for
heavy duty
- Vertical, cross (double vees) and longitudinal (one
vee & one flat) slideways are coated with turcite-b,
provides stable movement and durable accuracy
- Automatic continuous lubrication system, all
slideways and screws are fully oiled by automatic
continuous lubrication system to eliminate wears on
slideways & screws
- Cross feed, ball screw for cross travel, powered by
AC motor
- Vertical feed, powered by servo motor
- Hydraulic table speed ranges 5-25,/min. with rack
and pinion table drive for hand operation
- Proximity switch provide built-in-type (hidden)
proximity switch, features safe and easy operation
- Table speed control, presettable hydraulic table
speed control allows operator to pre-set speed rate,
enable to get same speed rate when engaging hydraulic
table every time
- Hand wheels zero-settings slip-rings with vernier on
vertical handwheel, and vernier on crossfeed handwheel
|
|
SPECIFICATION |
| ITEM / MODEL |
WSG-818AHD |
WSG-1020AHD |
WSG-1225AHD |
WSG-1240AHD |
WSG-1632AHD |
WSG-1640AHD |
| Table size |
8" x 18" |
10" x 20" |
12" x 25" |
12" x 40" |
16" x 32" |
16" x 40" |
| Max. longitudinal
travel |
20" |
25" |
30" |
44" |
36" |
44" |
| Max. distance from
spindle center to table |
17.7" |
23" |
23" |
23" |
23" |
23" |
| Magnetic chuck size |
7.87" x 17.7" |
9.8" x 19.7" |
11.8" x 23.6" |
11.8" x 39.4" |
15.7" x 31.5" |
15.7" x 39.4" |
| Speed of table
longitudinal movement (in/min) |
200" ~ 1000" |
280" ~ 1000" |
280" ~ 1,000" |
280" ~ 1,000" |
280" ~ 1,000" |
280" ~ 1,000" |
| Table transverse
movement |
Auto feed (in/min) |
0.004" ~ 0.3" |
0.004" ~ 0.03" |
0.004" ~ 0.3" |
0.004" ~ 0.3" |
0.004" ~ 0.3" |
0.004" ~ 0.3" |
| Rapid speed (in/min) |
39" |
39" |
39" |
39" |
39" |
39" |
| Feed of handwheel (in/div.) |
0.0008" |
0.0008" |
0.0008" |
0.0008" |
0.0008" |
0.0008" |
| Wheelhead vertical
movement |
Auto feed (in/stroke) |
0.0002" ~ 0.002"
(AHD) |
0.0002" ~ 0.002"
(AHD) |
0.0002" ~ 0.002"
(AHD) |
0.0002" ~ 0.002"
(AHD) |
0.0002" ~ 0.002"
(AHD) |
0.0002" ~ 0.002"
(AHD) |
| Rapid speed (in/min) |
18"
(AHD) |
18"
(AHD) |
18"
(AHR, AHD) |
18"
(AHR, AHD) |
18"
(AHR, AHD) |
18"
(AHR, AHD) |
| Feed of handwheel (in/div.) |
0.0004" |
0.0002" |
0.0002" |
0.0002" |
0.0002" |
0.0002" |
| Grinding wheel |
Speed (60 HZ) |
3450 RPM |
1750 RPM |
1750 RPM |
1750 RPM |
1750 RPM |
1750 RPM |
| (OD x W x ID) Size |
8" x 0.8" x 1 1/4" |
13.8" x 1.6" x 5" |
13.8" x 1.6" x 5" |
13.8" x 1.6" x 5" |
13.8" x 1.6" x 5" |
13.8" x 1.6" x 5" |
| Motor of Spindle |
2 HP |
7.5 HP |
10 HP |
10 HP |
10 HP |
10 HP |
Max. loading
capacity of table
(including magnetic chuck) |
270 Lbs |
400 Lbs |
600 Lbs |
900 Lbs |
1100 Lbs |
1300 Lbs |
| Height of machine |
66" |
74.4" |
74.4" |
74.4" |
74.4" |
74.4" |
| Floor space (L x W) |
72" x 86" |
106" x 86" |
112" x 88" |
176" x 88" |
144" x 96" |
176" x 96" |
| Gross weight |
3,970 Lbs |
5,290 Lbs |
6,170 Lbs |
7,720 Lbs |
8,380 Lbs |
9,480 Lbs |
| Package dimensions
(L x W x H) |
72" x 67" x 85" |
85" x 84" x 84" |
93" x 88" x 84" |
116" 88" x 85" |
112" x 90" x 85" |
116" x 90" x 86" |
|
Design and specifications are subject to
change without notice |
|
|
